Search

Context. Galactic cosmic rays (GCRs) and solar particles with energies greater than tens of MeV penetrate spacecraft and instruments hosted aboard space missions. The Solar Orbiter Metis coronagraph is aimed at observing the solar corona in both visible (VL) and ultraviolet (UV) light. Particle tracks are observed in the Metis images of the corona. An algorithm has been implemented in the Metis processing electronics to detect the VL image pixels crossed by cosmic rays. This algorithm was initially enabled for the VL instrument only, since the process of separating the particle tracks in the UV images has proven to be very challenging. Aims. We study the impact of the overall bulk of particles of galactic and solar origin on the Metis coronagraph images. We discuss the effects of the increasing solar activity after the Solar Orbiter mission launch on the secondary particle production in the spacecraft. Methods. We compared Monte Carlo simulations of GCRs crossing or interacting in the Metis VL CMOS sensor to observations gathered in 2020 and 2022. We also evaluated the impact of solar energetic particle events of different intensities on the Metis images. Results. The study of the role of abundant and rare cosmic rays in firing pixels in the Metis VL images of the corona allows us to estimate the efficiency of the algorithm applied for cosmic-ray track removal from the images and to demonstrate that the instrument performance had remained unchanged during the first two years of the Solar Orbiter operations. The outcome of this work can be used to estimate the Solar Orbiter instrument's deep charging and the order of magnitude for energetic particles crossing the images of Metis and other instruments such as STIX and EUI., Comment: 8 pages, 6 figures

The Colour and Stereo Surface Science Imaging System (CaSSIS) of the ExoMars Trace Gas Orbiter returns on average twenty images per day of the Martian surface, most of them in 3 or 4 colours and some of them in stereo. CaSSIS uses a push-frame approach to acquire colour images, with four bandpass filters deposited directly above the sensor and an imaging cadence synchronized with the ground track velocity to cover the imaged area with tens of small, partially overlapping images. These "framelets" are later map-projected and mosaicked to build the final image. This approach offers both advantages and challenges in terms of radiometric calibration. While the collection of dark and flatfield frames is considerably enhanced by the frequent and fast acquisition of tens of successive images, mosaics assembled from the adjacent framelets highlight the straylight and changes in the bias of the detector. Both issues have been identified on CaSSIS images, with low intensities overall (up to a few percents), but sufficient to generate prominent artefacts on the final assembled colour images. We have therefore developed methods to correct these artefacts that are now included into the radiometric calibration pipeline. We detail here the different steps of the calibration procedure and the generation of the products used for calibration, and discuss the efficacy of the corrections. The relative uncertainties on the bias and flatfield frames are low, of the order of 0.2 and 0.1 percents, respectively. The uncertainty on the absolute radiometric calibration is of 3 percents, which is quite low for such an instrument. The straylight adds an estimated about 1 percent error to the absolute calibration. The residuals after corrections of the straylight and bias offsets are of the order of a few DNs to tens of DNs.

Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7 $R_\odot$ to about 9 $R_\odot$. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close vantage point (down to 0.28 AU), achieving out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, will allow longer-term studies of the coronal features. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-{\alpha} line at 121.6 nm. The coronal images in both the UV Lyman-{\alpha} and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 second can be achieved when observing coronal fluctuations in visible light. The Metis measurements will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes acceleration and where the onset and initial propagation of coronal mass ejections take place, thus significantly improving our understanding of the region connecting the Sun to the heliosphere.

The Cherenkov Telescope Array (CTA) is the next generation ground based observatory for gamma ray astronomy at very high energies. Employing more than 100 Imaging Atmospheric Cherenkov Telescopes in the northern and southern hemispheres, it was designed to reach unprecedented sensitivity and energy resolution. Understanding and correcting for systematic biases on the absolute energy scale and instrument response functions will be a crucial issue for the performance of CTA. The LUPM group and the Spanish/Italian/Slovenian collaboration are currently building two Raman LIDAR prototypes for the online atmospheric calibration along the line of sight of the CTA. Requirements for such a solution include the ability to characterize aerosol extinction at two wavelengths to distances of 30 km with an accuracy better than 5%, within time scales of about a minute, steering capabilities and close interaction with the CTA array control and data acquisition system as well as other auxiliary instruments. Our Raman LIDARs have design features that make them different from those used in atmospheric science and are characterized by large collecting mirrors (2.5 m2), liquid light guides that collect the light at the focal plane and transport it to the readout system, reduced acquisition time and highly precise Raman spectrometers. The Raman LIDARs will participate in a cross calibration and characterization campaign of the atmosphere at the CTA North site at La Palma, together with other site characterization instruments. After a one year test period there, an in depth evaluation of the solutions adopted by the two projects will lead to a final Raman LIDAR design proposal for both CTA sites.