Search

The Space Telescope Imaging Spectrograph (STIS) was successfully installed into the Hubble Space Telescope (HST) in 1997 February, during the second HST servicing mission, STS-82. STIS is a versatile spectrograph, covering the 115-1000 nm wavelength range in a variety of spectroscopic and imaging modes that take advantage of the angular resolution, unobstructed wavelength coverage, and dark sky offered by the HST. In the months since launch, a number of performance tests and calibrations have been carried out and are continuing. These tests demonstrate that the instrument is performing very well. We present here a synopsis of the results to date.

One second of arc pointing accuracy has been achieved by servocontrolling the secondary mirror of a Dall-Kirkham telescope flown in an Aerobee 150 rocket. The primary mirror is weight-relieved, mounted at its nodal line and can resolve 2 arc sec. An objective LiF prism mounted near the focal plane provides a lowresolution far uv spectrum suitable for studying planetary atmospheres. Solar blind photomultiplier tubes with pulse counting electronics provide a dark current background of less than 1 count/sec. Spectra of Venus, Jupiter and eta Ursa Majoris (U Ma) were obtained in a flight from White Sands, New Mexico, on 5 December 1967. Further flights are planned with the recovered package.

Two methods of off-set sun-tracking are described which were developed as part of the balloon-astronomy program of The Johns Hopkins University for daytime observations of the planet Venus. The performance of the system in flight, while subject to oscillations in the suspension system, is discussed.

The Space Telescope Imaging Spectrograph (STIS) operates from the UV to near IR providing a general purpose, imaging spectroscopic capability. An internal, two mirror relay system corrects the spherical aberration and astigmatism present at the STIS field position. Low and medium resolution imaging spectroscopy is possible throughout the spectral range and over the 25 arcsecond UV and 52 arcsecond visible fields. High resolution echelle spectroscopy capability is also provided in the UV. Target acquisition is accomplished using the STIS cameras, either UV or visible; these cameras may also be used to provide broad band imaging over the complete spectral range or with the small selection of available bandpass filters. A wide selection of slits and apertures permit various combinations of spectral resolution and field size in all modes. On board calibration lamps provide wavelength calibration and flat fielding capability. We report here on the optical performance of STIS as determined during orbital verification.

The preliminary design for the Space Telescope Imaging Spectrograph (STIS), which has been selected by NASA for definition study for future flight as a second-generation instrument on the Hubble Space Telescope (HST), is presented. STIS is a two-dimensional spectrograph that will operate from 1050 A to 11,000 A at the limiting HST resolution of 0.05 arcsec FWHM, with spectral resolutions of 100, 1200, 20,000, and 100,000 and a maximum field-of-view of 50 x 50 arcsec. Its basic operating modes include echelle model, long slit mode, slitless spectrograph mode, coronographic spectroscopy, photon time-tagging, and direct imaging. Research objectives are active galactic nuclei, the intergalactic medium, global properties of galaxies, the origin of stellar systems, stelalr spectral variability, and spectrographic mapping of solar system processes.