1. Evaluation of Construction Practices That Influence the Bond Strength at the Interface between Pavement Layers.
- Author
-
Tashman, Laith, Nam, Kitae, Papagiannakis, Tom, Willoughby, Kim, Pierce, Linda, and Baker, Tom
- Subjects
- *
ASPHALT , *BITUMINOUS materials , *ASPHALT concrete , *ASPHALT rock , *ASPHALT pavements , *UNIVERSITIES & colleges , *CONSTRUCTION industry - Abstract
This study investigated the influence of several construction practices on the bond strength at the interface between pavement layers. These practices included the surface treatment, curing time, residual application rate, and equipment tracking. Three tests were performed for estimating the bond strength between an existing hot mix asphalt (HMA) and a newly constructed HMA overlay, namely the Florida Dept. of Transportation shear tester, the University of Texas at El Paso pull off test, and the torque bond test. Testing involved a CSS-1 type emulsion as the tack coat. The results from the three tests were statistically analyzed. Generally, milling provided a significantly better bond at the interface between the existing surface and the new overlay. Curing time had a minimal effect on the bond strength. The results indicated that the absence of tack coat did not significantly affect the bond strength at the interface for the milled sections, whereas it severely decreased the strength for the nonmilled sections. The results also showed that increasing the residual rate of tack coat did not generally affect the bond strength at the interface. [ABSTRACT FROM AUTHOR]
- Published
- 2008
- Full Text
- View/download PDF