Search

In the γ-ray spectrometric analysis of the radionuclides, a correction factor is generally required for the spectral interfering γ-rays in determining the net areas of the analytical peaks because some interfering γ-rays often might contribute to the analytical peaks of interest. In present study, a correction methodology for the spectral interfering γ-rays (CSI) is described. In particular, in the analysis of (232)Th contained in samples, the interfering γ-rays due to (226)Ra, (235)U, (238)U and their decay products often overlap to the peaks of interest from (232)Th decay products, and vise versa. For the validation of the proposed CSI method, several certified reference materials (CRM) containing U and Th were measured by using a 76.5% efficient n-type Ge detector. The required correction factors were quantified for spectral interference, self-absorption and true coincidence summing (TCS) effects for the relevant γ-rays. The measured results indicate that if one ignores the contributions of the interfering γ-rays to the analytical peaks at 583.2 keV of (208)Tl and 727.3 keV of (212)Bi, this leads to a significantly systematic influence on the resulted activities of (232)Th. The correction factors required for spectral interference and TCS effects are estimated to be ∼13.6% and ∼15.4% for 583.2 keV peak. For the 727.3 keV peak, the correction factor is estimated to be ∼15% for spectral interference, and ∼5% for the TCS effects at the presently used detection geometry. On the other hand, the measured results also indicate that ignoring the contribution of the interfering γ-rays to the areas of the analytical peaks at 860.6 keV of (208)Tl, 338.3 and 911.2 keV of (228)Ac does not lead to any significant systematic influence on the (232)Th analysis. Because these factors are remained generally less than ∼5%, i.e., within overall uncertainty limits. The present study also showed that in view of both the spectral interference and TCS effects, the "cleaner" analytical peaks are seen at 338.3 keV (11.25%) and 911.2 keV (26.13%) of (228)Ac when high resolution γ-rays spectrometry was used in the (232)Th activity measurements. Therefore, they can be adopted as the "reference" peaks in the (232)Th analysis., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

When the high-resolution gamma-ray spectrometry was used in the analysis of (234)U and (230)Th in samples, there is a much more need to correct for the measured activity results of (234)U and (230)Th mainly due to self-absorption effects and the interfering lines from (226)Ra, (235)U, (238)U and their decay products that often might be present in the samples. Therefore, in the present study, the methods for the spectral interference corrections for the analytical peaks of (234)U and (230)Th are suggested to take into account the contributions of the overlapping gamma rays to these peaks. For the method validation, direct gamma-ray spectrometric measurements were carried out using certified reference materials (CRM) by use of a 76.5 % n-type Ge detector. The activities measured for the CRM samples were corrected for spectral interferences, self-absorption and true coincidence-summing (TCS) effects. The obtained results indicate that ignoring of the contribution of the interference gamma rays to the main analytical peak at 53.2 keV of (234)U leads to a lager systematic error of 87.3-90.4 % for the measured activities of (234)U, and similarly if one ignores the contributions of the interference gamma rays to the main analytical peak at 67.7 keV of (230)Th, this leads to a much smaller systematic error of 2.1-2.7 % for the activities of (230)Th. Therefore, the required correction factors for spectral interferences to the analytical peaks of (234)U and (230)Th are not negligible and thus they should also be considered besides necessary self-absorption factors to determine more accurate activities in the samples. On the other hand, it is estimated that although the TCS effects on the main analytical peaks of both (234)U and (230)Th are negligibly small, those TCS correction factors for their interference gamma rays to these peaks should be taken into account when direct measurements are performed in a close-counting geometry condition. Otherwise, the resulted activities can have serious erroneous results for both (234)U and (230)Th while using gamma-ray spectrometry, thereby leading to inaccuracies in their derived quantities, for instance, the corresponding age determinations of the samples.

In this study, the spectral interferences are investigated for the analytical peaks at 63.3 keV of (234)Th and 1001.0 keV of (234m)Pa, which are often used in the measurement of (238)U activity by the gamma-ray spectrometry. The correction methods are suggested to estimate the net peak areas of the gamma-rays overlapping the analytical peaks, due to the contribution of (232)Th that may not be negligible in materials rich in natural thorium. The activity results for the certified reference materials (CRMs) containing U and Th were measured with a well type Ge detector. The self-absorption and true coincidence-summing (TCS) effects were also taken into account in the measurements. It is found that ignoring the contributions of the interference gamma-rays of (232)Th and (235)U to the mixed peak at 63.3 keV of (234)Th ((238)U) leads to the remarkably large systematic influence of 0.8-122% in the measured (238)U activity, but in case of ignoring the contribution of (232)Th via the interference gamma-ray at 1000.7 keV of (228)Ac to the mixed peak at 1001 keV of (234m)Pa ((238)U) results in relatively smaller systematic influence of 0.05-3%, depending on thorium contents in the samples. The present results showed that the necessary correction for the spectral interferences besides self-absorption and TCS effects is also very important to obtain more accurate (238)U activity results. Additionally, if one ignores the contribution of (232)Th to both (238)U and (40)K activities in materials, the maximum systematic influence on the effective radiation dose is estimated to be ~6% and ~1% via the analytical peaks at 63.3 and 1001 keV for measurement of the (238)U activity, respectively.