Search

The spatiotemporal distribution profile of polymeric nanoparticles (NPs) in the eye is important as it will determine their effectiveness as topical ocular drug delivery systems for specific eye diseases. Physical stability of the nanoparticles in an ophthalmic formulation and thermal stability of the entrapped drug are critical as well to the applicability of polymeric nanoparticles as drug delivery to the eye. To investigate these characteristics, Cy5-labeled, poly(lactic-co-glycolic acid) (PLGA) NPs (ζ-potential: -14.1±1.5 mV, size: 241.7±0.6 nm) and lutein-loaded PLGA NPs (ζ-potential: -6.7±0.3 mV, size: 210.6±3.3 nm) were synthesized, and their stability and biodistribution were assessed. Lutein-loaded NPs were stable at 4°C without significant changes in size and morphology, without significant lutein degradation, and 26% release after 5 weeks in suspension. In contrast, lutein-loaded NPs stored at 25°C and 37°C experienced significant changes in size, likely due to aggregation and surfactant dissociation; these NPs showed signs of bulk degradation based on transmission electron microscopy (TEM), and had significant lutein degradation and over 40% release after 5 weeks. Lutein loaded in NPs was more resistant to photodegradation compared to a free lutein solution when exposed to UV for 6 h, degrading 5 times slower than free lutein. To test the performance of NP therapeutics in vivo, Cy5-labled NPs were applied topically to the eyes of rats and incubated for 15 min, 30 min, or 60 min. Exterior eye tissues including the cornea, episcleral tissue, and sclera showed the highest fluorescence intensity in animals that received fluorescent nanoparticles, while the choroid was the only inner eye tissue that was significantly higher in a treatment group compared to the control group. Additionally, decreases of fluorescence in all exterior eye tissues and the choroid at 1 h compared to 30 min, indicated rapid elimination of NPs from the eye.

Rationale: Conventional 3-dimensional (3D) printing techniques cannot produce structures of the size at which individual cells interact. Objective: Here, we used multiphoton-excited 3D printing to generate a native-like extracellular matrix scaffold with submicron resolution and then seeded the scaffold with cardiomyocytes, smooth muscle cells, and endothelial cells that had been differentiated from human-induced pluripotent stem cells to generate a human-induced pluripotent stem cell–derived cardiac muscle patch (hCMP), which was subsequently evaluated in a murine model of myocardial infarction. Methods and Results: The scaffold was seeded with ≈50 000 human-induced pluripotent stem cell–derived cardiomyocytes, smooth muscle cells, and endothelial cells (in a 2:1:1 ratio) to generate the hCMP, which began generating calcium transients and beating synchronously within 1 day of seeding; the speeds of contraction and relaxation and the peak amplitudes of the calcium transients increased significantly over the next 7 days. When tested in mice with surgically induced myocardial infarction, measurements of cardiac function, infarct size, apoptosis, both vascular and arteriole density, and cell proliferation at week 4 after treatment were significantly better in animals treated with the hCMPs than in animals treated with cell-free scaffolds, and the rate of cell engraftment in hCMP-treated animals was 24.5% at week 1 and 11.2% at week 4. Conclusions: Thus, the novel multiphoton-excited 3D printing technique produces extracellular matrix–based scaffolds with exceptional resolution and fidelity, and hCMPs fabricated with these scaffolds may significantly improve recovery from ischemic myocardial injury.

Fusion of donor mesenchymal stem cells with parenchymal cells of the recipient can occur in the brain, liver, intestine and heart following transplantation. The therapeutic benefit or detriment of resultant hybrids is unknown. Here we sought a global view of phenotypic diversification of mesenchymal stem cell-cardiomyocyte hybrids and associated time course. Using single-cell RNA-seq, we found hybrids consistently increase ribosome components and decrease genes associated with the cell cycle suggesting an increase in protein production and decrease in proliferation to accommodate the fused state. But in the case of most other gene groups, hybrids were individually distinct. In fact, though hybrids can express a transcriptome similar to individual fusion partners, approximately one-third acquired distinct expression profiles in a single day. Some hybrids underwent reprogramming, expressing pluripotency and cardiac precursor genes latent in parental cells and associated with developmental and morphogenic gene groups. Other hybrids expressed genes associated with ontologic cancer sets and two hybrids of separate experimental replicates clustered with breast cancer cells, expressing critical oncogenes and lacking tumor suppressor genes. Rapid transcriptional diversification of this type garners consideration in the context of cellular transplantation to damaged tissues, those with viral infection or other microenvironmental conditions that might promote fusion.

Aims: Stem cell transplantation holds promise as a therapeutic approach for the repair of damaged myocardial tissue. One challenge of this approach is efficient delivery and long-term retention of the stem cells. Although several synthetic and natural biomaterials have been developed for this purpose, the ideal formulation has yet to be identified. Materials & methods: Here we investigate the utility of a nondenatured, noncrosslinked, commercially available natural biomaterial (TissueMend® [TEI Biosciences, Boston, MA, USA]) for delivery of human mesenchymal stem cells (MSCs) to the murine heart. Results: We found that MSCs attached, proliferated and migrated within and out of the TissueMend matrix in vitro. Human MSCs delivered to damaged murine myocardium via the matrix (2.3 × 104 ± 0.8 × 104 CD73+ cells/matrix) were maintained in vivo for 3 weeks and underwent at least three population doublings during that period (21.9 × 104 ± 14.4 × 104 CD73+ cells/matrix). In addition, collagen within the TissueMend matrix could be remodeled by MSCs in vivo, resulting in a significant decrease in the coefficient of alignment of fibers (0.12 ± 0.12) compared with the matrix alone (0.28 ± 0.07), and the MSCs were capable of migrating out of the matrix and into the host tissue. Conclusion: Thus, TissueMend matrix offers a commercially available, biocompatible and malleable vehicle for the delivery and retention of stem cells to the heart.

Self-assembling peptides and peptide derivatives bearing cell-binding ligands are increasingly being investigated as defined cell culture matrices and as scaffolds for regenerative medicine. In order to systematically refine such scaffolds to elicit specific desired cell behaviors, ligand display should ideally be achieved without inadvertently altering other physicochemical properties such as viscoelasticity. Moreover, for in vivo applications, self-assembled biomaterials must exhibit low immunogenicity. In the present study, multi-peptide co-assembling hydrogels based on the beta-sheet fibrillizing peptide Q11 (QQKFQFQFEQQ) were designed such that they presented RGDS or IKVAV ligands on their fibril surfaces. In co-assemblies of the ligand-bearing peptides with Q11, ligand incorporation levels capable of influencing the attachment, spreading, morphology, and growth of human umbilical vein endothelial cells (HUVECs) did not significantly alter the materials’ fibrillization, beta-turn secondary structure, or stiffness. RGDS-Q11 specifically increased HUVEC attachment, spreading, and growth when co-assembled into Q11 gels, whereas IKVAV-Q11 exerted a more subtle influence on attachment and morphology. Additionally, Q11 and RGDS-Q11 were minimally immunogenic in mice, making Q11-based biomaterials attractive candidates for further investigation as defined, modular extracellular matrices for applications in vitro and in vivo.

The extracellular matrix (ECM) impacts stem cell differentiation, but identifying formulations supportive of differentiation is challenging in 3D models. Prior efforts involving combinatorial ECM arrays seemed intuitively advantageous. We propose an alternative that suggests reducing sample size and technological burden can be beneficial and accessible when coupled to design of experiments approaches. We predict optimized ECM formulations could augment differentiation of cardiomyocytes derived in vitro. We employed native chemical ligation to polymerize 3D poly (ethylene glycol) hydrogels under mild conditions while entrapping various combinations of ECM and murine induced pluripotent stem cells. Systematic optimization for cardiomyocyte differentiation yielded a predicted solution of 61%, 24% and 15% of collagen type I, laminin-111 and fibronectin, respectively. This solution was confirmed by increased numbers of cardiac troponin T, α-myosin heavy chain and α-sarcomeric actinin-expressing cells relative to suboptimum solutions. Cardiomyocytes of composites exhibited connexin43 expression, appropriate contractile kinetics and intracellular calcium handling. Further, adding a modulator of adhesion, thrombospondin-1, abrogated cardiomyocyte differentiation. Thus, the integrated biomaterial platform statistically identified an ECM formulation best supportive of cardiomyocyte differentiation. In future, this formulation could be coupled with biochemical stimulation to improve functional maturation of cardiomyocytes derived in vitro or transplanted in vivo.

Once damaged, cardiac tissue does not readily repair and is therefore a primary target of regenerative therapies. One regenerative approach is the development of scaffolds that functionally mimic the cardiac extracellular matrix (ECM) to deliver stem cells or cardiac precursor populations to the heart. Technological advances in micro/nanotechnology, stem cell biology, biomaterials and tissue decellularization have propelled this promising approach forward. Surprisingly, technological advances in optical imaging methods have not been fully utilized in the field of cardiac regeneration. Here, we describe and provide examples to demonstrate how advanced imaging techniques could revolutionize how ECM-mimicking cardiac tissues are informed and evaluated.

Extracellular matrices (ECMs) are complex materials, containing at least dozens of different macromolecules that are assembled together, thus complicating their optimization towards applications in 3D cell culture or tissue engineering. The natural complexity of ECMs has limited cell-matrix investigations predominantly to experiments where only one matrix component is adjusted at a time, making it difficult to uncover interactions between different matrix components or to efficiently determine optimal matrix compositions for specific desired biological responses. Here we have developed modular synthetic ECMs based on peptide self-assembly whose incorporation of multiple different peptide ligands can be adjusted. The peptides can co-assemble in a wide range of combinations to form hydrogels of uniform morphology and consistent mechanical properties, but with precisely varied mixtures of peptide ligands. The modularity of this system in turn enabled multi-factorial experimental designs for investigating interactions between these ligands and for determining a multi-peptide matrix formulation that maximized endothelial cell growth. In cultures of HUVECs, we observed a previously unknown antagonistic interaction between the laminin-derived peptide YIGSR and RGDS-mediated cell attachment and growth. We also identified an optimized combination of self-assembled peptides bearing the ligands RGDS and IKVAV that led to endothelial cell growth equivalent to that on native full-length fibronectin. Both of these findings would have been challenging to uncover using more traditional one-factor-at-a-time analyses.

Self-assembly has been increasingly utilized in recent years to create peptide-based biomaterials for 3D cell culture, tissue engineering, and regenerative medicine, but the molecular determinants of these materials' immunogenicity have remained largely unexplored. In this study, a set of molecules that self-assembled through coiled coil oligomerization was designed and synthesized, and immune responses against them were investigated in mice. Experimental groups spanned a range of oligomerization behaviors and included a peptide from the coiled coil region of mouse fibrin that did not form supramolecular structures, an engineered version of this peptide that formed coiled coil bundles, and a peptide-PEG-peptide triblock bioconjugate that formed coiled coil multimers and supramolecular aggregates. In mice, the native peptide and engineered peptide did not produce any detectable antibody response, and none of the materials elicited detectable peptide-specific T cell responses, as evidenced by the absence of IL-2 and interferon-gamma in cultures of peptide-challenged splenocytes or draining lymph node cells. However, specific antibody responses were elevated in mice injected with the multimerizing peptide-PEG-peptide. Minimal changes in secondary structure were observed between the engineered peptide and the triblock peptide-PEG-peptide, making it possible that the triblock's multimerization was responsible for this antibody response.

Peptides, peptidomimetics, and peptide derivatives that self-assemble into fibrillar gels have received increasing interest as synthetic extracellular matrices for applications in 3D cell culture and regenerative medicine. Recently, several of these fibrillizing molecules have been functionalized with bioactive components and chemical features such as cell-binding ligands, degradable sequences, drug eluting compounds, and cross-linkable groups, thereby producing gels that can reliably display multiple factors simultaneously. This capacity for incorporating precise levels of many different biological and chemical factors is advantageous given the natural complexity of cell-matrix interactions that many current biomaterial strategies seek to mimic. In this review, recent efforts in the area of fibril-forming peptide materials are described, and advantages of biomaterials containing multiple modular elements are outlined. In addition, a few hurdles and open questions surrounding fibrillar peptide gels are discussed, including issues of the materials' structural heterogeneity, challenges in fully characterizing the diversity of their self-assembled structures, and incomplete knowledge of how the materials are processed in vivo.

Hydrogels produced from self-assembling peptides and peptide derivatives are being investigated as synthetic extracellular matrices for defined cell culture substrates and scaffolds for regenerative medicine. In many cases, however, they are less stiff than the tissues and extracellular matrices they are intended to mimic, and they are prone to cohesive failure. We employed native chemical ligation to produce peptide bonds between the termini of fibrillized β-sheet peptides to increase gel stiffness in a chemically specific manner while maintaining the morphology of the self-assembled fibrils. Polymerization, fibril structure, and mechanical properties were measured by SDS–PAGE, mass spectrometry, TEM, circular dichroism, and oscillating rheometry; and cellular responses to matrix stiffening were investigated in cultures of human umbilical vein endothelial cells (HUVECs). Ligation led to a fivefold increase in storage modulus and a significant enhancement of HUVEC proliferation and expression of CD31 on the surface of the gels. The approach was also orthogonal to the inclusion of unprotected RGD-functionalized self-assembling peptides, which further increased proliferation. This strategy broadens the utility of self-assembled peptide materials for applications that require enhancement or modulation of matrix mechanical properties by providing a chemoselective means for doing so without significantly disrupting the gels' fibrillar structure.

Extracellular matrices (ECMs) are challenging design targets for materials synthesis because they serve multiple biological roles, and they are composed of multiple molecular constituents. In addition, their composition and activities are dynamic and variable between tissues, and they are difficult to study mechanistically in physiological contexts. Nevertheless, the design of synthetic ECMs is a central consideration in applications such as regenerative medicine and 3D cell culture. In order to produce synthetic matrices having both multi-component construction and high levels of compositional definition, strategies based on molecular self-assembly are receiving increasing interest. These approaches are described in this tutorial review and compared with the structures and processes in native ECMs that serve as their inspiration.