Search

Background: A specific total knee arthroplasty (TKA) implant system was recently recalled for high incidence of early polymeric wear and osteolysis. We analyzed the early outcomes of aseptic revision with these implants., Methods: We identified 202 aseptic revision TKAs of this implant system performed at a single institution between 2010 and 2020. Revision indications included aseptic loosening (n = 120), instability (n = 55), and polymeric wear/osteolysis (n = 27). Components were revised in 145 cases (72%) and isolated polyethylene insert exchange occurred in 57 cases (28%). Kaplan-Meier and Cox proportional hazards analyses were used to determine survivorship free from all-cause rerevision and rerevision risk factors., Results: At 2 and 5 years, survivorship free from all-cause rerevision was 89 and 76% in the polyethylene exchange cohort versus 92 and 84% in the component revision cohort (P = .5). At 2 and 5 years, survivorship in revision with components from the same manufacturer was 89 and 80% compared to 95 and 86% in revision with components from a different manufacturer (P = .2). Among re-revisions (n = 30), cones (37%), sleeves (7%), hinge/distal femoral replacement implants were frequently used (13%). Men had increased risk for rerevision (hazard ratio = 2.3, P = .04)., Conclusion: In this series of aseptic revision TKAs performed on a now-recalled implant system, survivorship free from rerevision was lower than expected when components from the same manufacturer were utilized, but comparable to contemporary reports when both the components were revised with an alternative implant system. Metaphyseal fixation with cones and sleeves as well as highly constrained implants was frequently utilized at time of rerevision TKA., Level of Evidence: Level IV., (Copyright © 2023 Elsevier Inc. All rights reserved.)

The purpose of the present study was to determine the long-term clinical and radiographic results, survival rate, prevalence of osteolysis, and prevalence of fracture of the tibial polyethylene insert following total knee arthroplasty (TKA). Three hundred patients (600 knees) were included in this follow-up study. The mean age of the patients (and standard deviation) was 60.3 ± 4.3 years, and the mean duration of follow-up was 13.2 years (range, 12 to 14 years). Revision of the TKA prosthesis was performed in 7 knees (2.3%) with a compression-molded polyethylene (CPE) tibial insert and 6 knees (2%) with a highly cross-linked polyethylene (HXLPE) tibial insert. The rate of survival at 14 years was 97.7% (95% confidence interval [CI], 94%-100%) in the CPE group and 98% (95% CI, 94%-100%) in the HXLPE group with reoperation for any reason as the end point. The rate of survival at 14 years was 98% (95% CI, 94%-100%) in both groups with reoperation for mechanical failure as the end point. No knee had osteolysis or fracture of the tibial polyethylene insert. There were no between-group differences. LEVEL OF EVIDENCE:: Therapeutic Level I. See Instruction for Authors for a complete description of levels of evidence.

In our original report, 97 patients (114 knees) underwent revision total knee arthroplasty with use of a Legacy Constrained Condylar Knee prosthesis (LCCK; Zimmer), with a mean follow-up of 7.2 years (range, 5 to 10 years). The purpose of the present study was to determine the long-term clinical and radiographic results, with a focus on component fixation and the prevalence of osteolysis. At a mean follow-up of 19.2 years (range, 16 to 21 years), re-revision of the LCCK prosthesis had been performed in 10 knees (9%). The rate of survival at 19.2 years was 96% (95% confidence interval [CI], 94% to 100%) with reoperation for mechanical failure as the end point, and 91% (95% CI, 87% to 98%) with reoperation for any reason as the end point. One knee had circumferential osteolysis around the components. LEVEL OF EVIDENCE:: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Hypothesis: Mobile-bearing total knee arthroplasty (TKA) implants were developed as an alternative to fixed-bearing implants because of their theoretical advantages related to wear and range of motion. For all that, none of the short-term and medium-term studies published so far have reported a significant clinical improvement related to these mobile bearings. The goal of this study was to compare the outcomes of fixed and mobile bearings in the same type of TKA model after a longer follow-up., Material and Methods: This series initially comprised 100 patients with a mean age of 73 years who were operated by a single surgeon. The patients were randomised to receive either a fixed bearing TKA implant or a mobile one; their outcomes evaluated after a mean of 9 years (7.2-12.2) follow-up. Twenty-two patients died before the final review, 15 were lost to follow-up and 2 were excluded. This resulted in 30 patients with a mobile-bearing knee and 31 with a fixed-bearing knee being available for analysis., Results: There were no significant clinical differences between the groups receiving a fixed or mobile bearing in terms of the range of motion, subjective outcomes or validated outcomes measured, such as the self-reported Oxford or the IKS. Conversely, there was a significantly higher rate of osteolysis in the fixed-bearing group, but it was not clinically relevant., Conclusion: This study, which has the longest published follow-up, confirms the results found in the seven randomised studies published up to now: there are no significant differences in the clinical outcomes between fixed-bearing and mobile-bearing inserts of the same TKA model. Although the mobile bearing knees had a better radiographic appearance, this did not translate to better clinical outcomes. In practice, the superiority of mobile bearings is solely theoretical., Level of Evidence Ii: Prospective randomised study., (Copyright © 2015 Elsevier Masson SAS. All rights reserved.)

Despite technical improvements, revision rates for total knee arthroplasties (TKAs) remain high. Our goal was to report the reason(s) for revision TKA in a large, current, multicenter series and compare those reasons with previously published reasons. We retrospectively identified 820 consecutive revision TKAs (693 patients, 2000-2012) from our 3 centers and recorded the primary reason for the revision. The top seven reasons for the revision were aseptic loosening (23.1%), infection (18.4%), polyethylene wear (18.1%), instability (17.7%), pain/stiffness (9.3%), osteolysis (4.5%), and malposition/malalignment (2.9%). Comparison with previously published reasons showed fewer TKA revisions for polyethylene wear, osteolysis, instability, and malalignment. These changes may represent improvements in surgical technique and implants., (© 2013 Elsevier Inc. All rights reserved.)

Purpose: Along with the increase in primary total knee arthroplasty, there has been an increase in the number of revisions. The aim of this study was to propose a selection algorithm for the knee revision constraint according to the state of ligaments and to the bone defects Anderson Orthopaedic Research Institute Classification [AORI] classification. The hypothesis was that this algorithm would facilitate the appropriate choice of prosthesis constraint, thus providing stable components and a good long-term survivorship of the knee revisions., Methods: Sixty consecutive revision knee arthroplasties in 57 patients were prospectively evaluated. Prostheses implanted at revision included postero-stabilised, condylar constrained and rotating hinged, relative to the state of the ligaments and of the bone loss around the knee. The median follow-up was nine years (range, 4-12)., Results: The median IKS knee and function scores and HSS score were 41 (15-62), 21.5 (12-43) and 34 (23-65) points, respectively, before the operation, and 81 (48-97), 79 (56-92) and 83.5 (62-98) points (p < 0.001) at the latest follow-up evaluation. The median ROM increased from 74° (29-110°) preoperatively to 121° (98-132°) (p < 0.01) at the final follow-up. Re-revision was necessary in five (8.3%) patients., Conclusions: A selection algorithm for the revision implant constraint based on the state of ligaments and the bone loss AORI classification could provide stable knee reconstructions and long-term success of knee revisions.

Background: We are aware of no information about the mid-term performance of the high-flexion total knee arthroplasty, although early results have been reported. The purpose of this study was to evaluate the mid-term results of high-flexion and conventional knee prostheses., Methods: We prospectively compared the results of 100 patients with osteoarthritis who had received a NexGen Legacy Posterior Stabilized (NexGen LPS) prosthesis in one knee and a NexGen Legacy Posterior Stabilized-Flex (NexGen LPS-Flex) prosthesis in the other. Seventy-five patients (150 knees) were women and twenty-five (fifty knees) were men. The mean age was sixty-five years (range, forty-eight to eighty-five years) at the time of the index procedure. The mean duration of follow-up was 10.3 years (range, ten to 10.6 years). The patients were assessed with radiographs, with the rating system of the Knee Society, and with the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score at three months, one year, and annually thereafter., Results: Total knee scores, knee function scores, pain scores, WOMAC scores, knee motion, and activity scores did not differ significantly between the two designs of the implants, on the basis of the numbers studied, either preoperatively or at the time of final follow-up. One knee in the NexGen LPS-Flex group was revised because of recurrent infection. No knee in either group had aseptic loosening of the components. The Kaplan-Meier survivorship at ten years postoperatively, with revision defined as the end point, was 100% (95% confidence interval, 94 to 100) for the NexGen LPS prosthesis and 99% (95% confidence interval, 93 to 100) for the NexGen LPS-Flex prosthesis., Conclusions: After a minimum duration of follow-up of ten years, there were no significant differences between the two groups with regard to implant survivorship, functional outcome, knee motion, or prevalence of osteolysis.

We prospectively enrolled 48 patients (53 knees), scheduled for high-flex posterior-stabilized rotating platform knee implant arthroplasty (PFCΣRPF) to our study. Performance of this implant, introduced in 2005, has been reported upon only up to 2 years. We report its 2- to 6-year postoperative clinical and radiographic results in 47 patients (52 knees). Mean Knee Society score improved from 35.7 to 96. Mean function score improved from 55.2 to 90.6. Postoperative knee flexion averaged 130° (95°-155°), 81% patients could sit cross legged, 53% could sit on floor, and 21% could squat. Kaplan-Meier survival rate was 100% at average 50.2 months (26-72 months). No patient had any spin-out of rotating bearing. Supervised radiographs were analyzed, which showed no osteolysis or component loosening., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Periprosthetic osteolysis is a common cause of revision of total knee arthroplasties (TKAs), with plain anteroposterior and lateral (APL) radiographs being the most common method for screening. The aim of this study was to examine the utility of lesion detection and volume appreciation with APL, paired oblique radiographs, and computed tomography. Defects of different sizes were created in 3 cadaveric knees with a cementless TKA in situ and imaged with APL, oblique, and computed tomography modalities. The resultant images were then shown to 3 arthroplasty surgeons, and the absence or presence of lesions, volume size, and confidence in assessment were recorded. The results suggest that the current practice of APL is inferior for the assessment of periprosthetic osteolysis around TKA., (Crown Copyright © 2012. Published by Elsevier Inc. All rights reserved.)

This is a prospective study of the midterm clinical and radiological outcome of 205 consecutive cases (185 patients) performed between January 2002 and December 2004 using a cementless fixed-bearing tibial tray. Complete clinical and radiological follow-up was done on 175 cases (157 patients). The average knee score at final follow-up using the Knee Society Score (Insall modification-1993) was 92 of 100 with 96.6% excellent compared with an average preoperative score of 57 of 100. Using radiological criteria, none of the patients had significant polyethylene wear or osteolysis; and the tibial trays had bone ingrowth in all but 1 case. Survivorship at an average of 5 years and 7 months was 98.85%. Based on our results, we conclude that an uncemented tibial component with Porocoat (DePuy, Warsaw, Ind) and hydroxyapatite coating provides sufficiently stable bone ingrowth fixation; and this tibial design has provided excellent and predictable midterm clinical and radiological outcome., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Background: Periprosthetic osteolysis is an increasingly prevalent complication of TKA. To reduce the polyethylene wear and periprosthetic osteolysis, particularly in young patients, the design of the contemporary fixed-bearing TKAs has been modified and mobile-bearing TKAs have been introduced., Questions/purposes: We asked whether the prevalence of osteolysis would be less in well-functioning mobile-bearing TKAs than in well-functioning contemporary fixed-bearing TKAs in young patients., Patients and Methods: We compared 488 patients (894 knees) who received fixed-bearing knee prostheses with 445 patients (816 knees) who received mobile-bearing knee prostheses. There were 187 men and 301 women (mean age, 58.6 years; range, 33-65 years) in the fixed-bearing group and 167 men and 278 women (mean age, 55.7 years; range, 33-65 years) in the mobile-bearing group. The mean followup was 12.6 years (range, 10-17 years) in the fixed-bearing group and 12.9 years (range, 10-17 years) in the mobile-bearing group., Results: The incidence of osteolysis was 1.6% (14 of 894 knees) in the fixed-bearing group and 2.2% (18 of 816 knees) in the mobile-bearing group at the final review. The mean postoperative Knee Society knee and function scores were 92.9 points and 83.5 points, respectively, in the fixed-bearing group and 90.7 points and 83.8 points, respectively, in the mobile-bearing group. The revision rates were 3.7% (33 of 894 knees) in the fixed-bearing group and 2.7% (22 of 816 knees) in the mobile-bearing group., Conclusions: We found the incidence of osteolysis, rate of revision, and implant survivorship were similar between fixed-bearing and mobile-bearing TKAs in younger patients.

Background: A third-generation TKA system was designed to address problems encountered with earlier designs including a high rate of patellofemoral complications. At a minimum of 5 years, we previously reported survivorship of 98.7% using revision for any reason as the endpoint for a cohort that includes the patients described in this report. That cohort was unique in that a tibial component that uses four short pegs for fixation was used in a subset of patients undergoing cruciate-retaining TKA and the tibial and femoral components were precoated with polymethylmethacrylate., Questions/purposes: We now report the survival rate, postoperative function, complications, radiographic loosening, and osteolysis at a minimum of 10 years postoperatively., Patients and Methods: We retrospectively reviewed 161 patients who underwent 179 TKAs. The patella was resurfaced in all cases and all components were cemented. Patients were evaluated clinically and radiographically for evidence of component loosening and osteolysis. Forty of the 161 patients (with 44 TKAs) had died and eight patients (nine knees) were lost to followup. For the remaining 113 patients (126 knees), the minimum followup was 10 years (mean, 11.7 years; range, 10.0-13.9 years)., Results: Survivorship at a minimum of 10 years postoperatively using revision for any reason and revision for aseptic loosening were 97.7% and 100%, respectively. Three knees were revised: one for infection, one for periprosthetic fracture, and one for postoperative arthrofibrosis. There were no reoperations for patellar component maltracking, wear or loosening, tibiofemoral polyethylene wear, osteolysis, or aseptic loosening. Hospital for Special Surgery scores improved from a mean of 47.7 (range, 23-78) preoperatively to 85.4 (range, 33-100)., Conclusions: This cruciate-retaining design had a low risk of implant failure or revision and the design changes eliminated the patellar failures seen with earlier iterations at up to 10 years., Level of Evidence: Level IV, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

This study aimed to evaluate the clinical and radiographic results and to document the prevalence of osteolysis associated with fixed-bearing (anatomic modular knee) and mobile-bearing (low contact stress) total knee arthroplasties (TKAs) in 61 patients younger than 55 years who had bilateral simultaneous primary TKAs. Forty-five patients were female and 16 patients were male. The mean age of the patients was 48.3 years (range, 34-55 years). The mean postoperative Knee Society knee and functional score were similar in both groups (91 and 90 points and 85 and 86 points, respectively). Three knees (5%) in each group were revised for wear of the tibial bearing, and 1 knee (2%) in the mobile-bearing TKA was revised for dislocation of the meniscal bearing. Osteolysis was identified in both radiographs and computed tomography scans in 6 knees (10%) in the anatomic-modular-knee group and 4 knees (7%) in the low-contact-stress group.

Although the incidence of failures resulting from wear-related osteolysis and associated severe bone defects are expected to diminish with important advances in polyethylene manufacturing and processing, alternative bearing surfaces, implant design, and revision techniques, current failures still reflect concerns regarding earlier ultra-high-molecular-weight polyethylene sterilization and degradation. Clinical experience before the year 2000 included rates of wear and osteolysis from 10% to as high as 70% at 7- to 14-year follow-up. With recent advances, early clinical results are encouraging, demonstrating 50% to 81% decreases in radiographic wear rates. These improvements should eventually reduce the burden of future revision hip and knee surgery. However, the long-term in vivo durability of total hip arthroplasties using these alternative materials and bearing couples has not yet been well established, and considerably fewer clinical data are available for other types of joint arthroplasties, such as total knee arthroplasty.

A cohort of patients underwent prospective follow-up to delineate the natural history of screw-associated osteolysis in cementless Anatomic Modular Knee arthroplasty. In 1993, fluoroscopically guided radiographs were obtained in 230 patients (280 arthroplasties) to identify occult osteolysis. This cohort was reassessed periodically to identify new or progressive screw-associated osteolysis. At early follow-up, 94 knees (34%) had osteolysis. Osteolysis progressed in all groups, and osteolysis developed in 60 additional knees. At intermediate follow-up, 55% of knees showed radiographic evidence of osteolysis. Osteolysis progressed to a higher grade in a significant percentage of patients, and 23% of arthroplasties were revised. Regular periodic radiographic evaluation is recommended for early recognition of osteolysis.

Unlabelled: We compared the incidence of wear-related failures between two large cohorts of patients undergoing total knee arthroplasty implanted with identical modular tibial trays and polyethylene inserts sterilized by different methods. A total of 1183 second-generation press-fit condylar prostheses having inserts packaged and sterilized in an oxygen-free environment were assessed at a minimum 5-year followup (mean, 7.0 years). Wear-related failure was defined as (1) osteolysis greater than 100 mm2 or (2) revision of the implant resulting from osteolysis, polyethylene wear, chronic synovitis, and/or effusion. Wear-related survivorship was calculated using Kaplan-Meier survival analysis. Results were compared with our previously published study of 1287 first-generation press-fit condylar modular knees having inserts sterilized by gamma irradiation in air at 5-year minimum followup (mean, 7.8 years). The wear-related failure rate for the second-generation design was 1.1% and 10-year survivorship was 97.0% compared with 8.3% failure and 87.7% 10-year survival for the first-generation design. For second-generation components, patient age was the only variable correlated with wear-related failure. For first-generation components sterilized in air, several variables were correlated to wear-related failure with shelf age of the polyethylene insert being the most important factor. These data emphasize the dramatic effect improvements in polyethylene manufacturing, specifically sterilization methods, can have on implant survivorship., Level of Evidence: Level III, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

As surgeons, we share the common goals of making total knee arthroplasty as reliable, as reproducible, and as durable as we can. For that reason, we are almost compelled to investigate the rotating platform knee because of the contentions that it might improve patellar tracking, decrease lateral release rates, improve flexion, or perhaps give better wear characteristics over the long term. But when we take a step back and carefully examine the scientific data from 20 years of clinical experience with the rotating platform knee, the data speak for itself. To date, there are no demonstrated clinical advantages in regard to wear, survivorship, kinematics, range of motion, or patellar function. The rotating platform design then is really just another knee design, clinically indistinguishable from many well-functioning, fixed-bearing total knee designs.

Background: Debris displaced from the articular and backside surfaces of the polyethylene inserts of modular tibial components is considered a chief cause of osteolysis at the sites of total knee arthroplasties. One design of total knee replacement featured changes, over time, in the proximal surface roughness of the tibial baseplate and the method of sterilization of the polyethylene insert. We hypothesized that polishing the baseplate surface and sterilizing the insert with means other than gamma radiation in air had reduced the prevalence of osteolysis., Methods: Three hundred and sixty-five posterior cruciate ligament-retaining Anatomic Modular Knee primary total knee arthroplasties were performed in 300 patients from 1987 to 1998. Anteroposterior and lateral radiographs of the knees were made within a five to ten-year postoperative interval. Two arthroplasty specialists independently examined the radiographs for evidence of osteolysis (defined as any nonlinear region of cancellous bone loss with delineable margins)., Results: Osteolysis was identified in 34% (eighty-two) of 242 knees treated with an insert that had been gamma-irradiated in air and affixed to a rough baseplate surface, and it was identified in 9% (nine) of ninety-eight knees treated with an insert that had been gamma-irradiated in an inert gas, or had not been irradiated, and joined to a polished surface. Osteolysis was associated with six factors, including one related to the patient (male gender), one related to the tibial baseplate (the proximal surface finish), three related to the polyethylene insert (the material from which it was machined, the sterilization method, and the shelf age), and one related to the technique (hyperextension of the femoral component relative to the tibial component)., Conclusions: In this design of a total knee prosthesis, polishing the tibial baseplate counterface and implementing a more contemporary sterilization practice (as opposed to gamma radiation in air) noticeably diminished but did not eliminate osteolysis.

Osteolysis is an emerging problem in patients who undergo total hip arthroplasty and total knee arthroplasty (TKA). Before the introduction of modular components, osteolysis was not as prevalent in patients who underwent TKA. Although polyethylene wear and the generation of small-particle debris were linked to the presence of osteolysis in patients who have undergone total hip arthroplasty, the fatigue-type wear and larger wear particles often seen with TKA were not thought to invoke the cellular response that causes osteolysis. Despite the lack of an identifiable cause for the osteolysis, the number of knees that developed lesions continued to increase. Therefore, modular components were examined to determine whether this innovation in TKA was actually contributing to the manifestation of osteolysis.

Background: Osteolysis is an important complication associated with total knee arthroplasty. The purpose of this study was to compare the prevalence of osteolysis after failed total knee arthroplasty with a mobile-bearing prosthesis and after failed arthroplasty with a fixed-bearing prosthesis., Methods: Eighty revision total knee arthroplasties performed between 1995 and 1998 were included in this study. All had radiographic evidence of advanced polyethylene wear. The mobile-bearing group consisted of thirty-four knees with a Low Contact Stress implant, and the fixed-bearing group included forty-six knees. The average time (and standard deviation) from the primary operation to the revision was 102.8 +/- 26.5 months in the mobile-bearing group and 96.0 +/- 30.1 months in the fixed-bearing group. The prerevision radiographs and operative findings were reviewed., Results: The prevalence of osteolysis was significantly higher in the mobile-bearing group (47%; sixteen of thirty-four knees) than in the fixed-bearing group (13%; six of forty-six knees) (p = 0.003). The distal part of the femur was involved in thirteen knees in the mobile-bearing group and in four knees in the fixed-bearing group. Seventeen knees had osteolysis in the posterior aspect of the femoral condyle, which was the most common site of osteolysis; however, twelve of them had no evidence of osteolysis on prerevision radiographs., Conclusions: The prevalence of osteolysis was higher in the knees with a mobile-bearing prosthesis than in those with a fixed-bearing prosthesis. The osteolysis was predominantly on the femoral side, adjacent to the posterior aspect of the condyle. Radiographic evaluation of osteolysis in the distal part of the femur may not be reliable and usually leads to an underestimation of the degree of osteolysis.