Search

Objectives: The concept of locomotive syndrome (LS) and its evaluation method, the LS risk test, have been applied in an integrated manner to capture the decline in mobility resulting from musculoskeletal disorders. The purpose of this study was to evaluate the impact of total knee arthroplasty (TKA) in the elderly with knee osteoarthritis, a common disorder found in LS., Methods: A total of 111 patients were registered prior to TKA and postoperatively followed up for 1 year. Three components of the LS risk test (the two-step test, stand-up test, and Geriatric Locomotive Function Scale-25) were assessed pre- and postoperatively., Results: After surgery, all three components of the test showed significant improvements from the baseline. The ratio of Stage 3 LS patients (progressed stage of decrease in mobility) reduced from 82.3% to 33.9% postoperatively. There was no significant difference in the degree of change in the scores between the younger (60-74 years) and older (≥75 years) age groups., Conclusions: We found that TKA has a major impact in preventing the progression of LS in patients with knee osteoarthritis. The LS risk test is a feasible tool for the longitudinal evaluation of patients with musculoskeletal diseases of varying severity and with multiple symptoms., (© Japan College of Rheumatology 2022. Published by Oxford University Press.)

Recovery of normal knee kinematics is critical for improving functional outcomes and patient satisfaction after total knee arthroplasty (TKA). The kinematics pattern after TKA varies from case to case, and it remains unclear how to reproduce normal knee kinematics. The present study aimed to evaluate rotational knee kinematics and soft-tissue balance using a navigation system and to assess the influence of intraoperative soft-tissue balance on the rotational knee kinematics. We evaluated 81 osteoarthritic knees treated with TKA using a posterior stabilized (50 knees) or cruciate retaining (31 knees) prosthesis. Rotational kinematics were assessed at 0, 30, 45, 60, and 90 degrees flexion angles by using a computer-assisted navigation system. Correlation between femorotibial rotational position and measured soft tissue balance was assessed by using Spearman's rank correlation coefficient. Rotational soft-tissue balance (the median angle of rotational stress) was significantly correlated with rotational kinematics (rotational axis of the femur relative to the tibia throughout the range of motion) at all measured angles after TKA. The correlation coefficients between the median angle of rotational stress and rotational kinematics were 0.97, 0.80, 0.74, 0.71, and 0.70 at 0, 30, 45, 60, and 90 degrees of flexion, respectively ( p -values <0.0001 in all measured angles). The correlation coefficient increased as the knee approached full extension. Our findings suggest that soft-tissue balance is a key factor for rotational kinematics, following both cruciate-retaining and posterior-stabilized TKA., Competing Interests: None declared., (Thieme. All rights reserved.)

Background: Proper soft tissue balance is crucial for a successful clinical outcome after total knee arthroplasty (TKA). Bi-cruciate substituting (BCS)-TKA has been developed to more closely approximate normal knee characteristics. The purpose of the present study was to evaluate midflexion laxity before and after BCS-TKA using a navigation system, and assess the correlation between intraoperative laxity and the maximum flexion angle after surgery., Methods: Fifty-one knees in 46 patients with osteoarthritis replaced with BCS prosthesis were assessed. Manual mild passive internal-external rotational and varus-valgus stress was applied to the knees, and the maximum total laxity was measured automatically by a navigation system before and after TKA. The correlations with the range of motion (ROM) were evaluated using Spearman's correlation coefficients (ρ)., Results: Internal-external stress assessment revealed no statistically significant difference at each flexion angle before and after BCS-TKA. In contrast, the varus-valgus stress assessment revealed that BCS-TKA had significantly decreased varus-valgus laxity from preoperative levels at 20-120° flexion angles. Furthermore, the maximum flexion angle at six months after surgery significantly correlated with the intraoperative laxity at deep flexion range., Conclusion: BCS-TKA stabilized varus-valgus laxity to better than preoperative levels at midflexion range., (Copyright © 2018 The Author(s). Published by Elsevier B.V. All rights reserved.)

Purpose: To evaluate changes in midflexion rotational laxity before and after posterior-stabilized (PS)-total knee arthroplasty (TKA)., Methods: Twenty-nine knees that underwent PS-TKA were evaluated. Manual mild passive rotational stress was applied to the knees, and the internal-external rotational angle was measured automatically by a navigation system at 30°, 45°, 60°, and 90° of knee flexion., Results: The post-operative internal rotational laxity was statistically significantly increased compared to the preoperative level at 30°, 45°, 60°, and 90° of flexion. The post-operative external rotational laxity was statistically significantly decreased compared to the preoperative level at 45° and 60° of flexion. The post-operative internal-external rotational laxity was statistically significantly increased compared to the preoperative level only at 30° of flexion. The preoperative and post-operative rotational laxity showed a significant correlation at 30°, 45°, 60°, and 90° of flexion., Conclusion: Internal-external rotational laxity increases at the initial flexion range due to resection of both the anterior or posterior cruciate ligaments and retention of the collateral ligaments in PS-TKA. Preoperative and post-operative rotational laxity indicated a significant correlation at the midflexion range. This study showed that a large preoperative rotational laxity increased the risk of a large post-operative laxity, especially at the initial flexion range in PS-TKA., Level of Evidence: III.

Introduction: Midflexion stability can potentially improve the outcome of total knee arthroplasty (TKA). The purpose of this study was to evaluate the correlation between varus-valgus stability at 0° of extension and 90° of flexion and that at the midflexion range in posterior-stabilized (PS)-TKA., Materials and Methods: Forty-three knees that underwent PS-TKA were evaluated. Manual mild passive varus-valgus stress was applied to the knees, and the postoperative maximum varus-valgus stability was measured every 10° throughout range of motion, using a navigation system. Correlations between the stability at 0°, 90° of flexion, and that at each midflexion angle were evaluated using Spearman's correlation coefficients., Results: The stability of 0° modestly correlated with that of 10°-20°, but it did not significantly correlate with that of 30°-80°. However, the stability of 90° strongly correlated with that of 60°-80°, modestly correlated with that of 40°-50°, weakly correlated with that of 20°-30°, and did not correlate with that of 10°., Conclusions: The present study confirmed the importance of acquiring stability at 90° flexion to achieve midflexion stability in PS-TKA. However, initial flexion stability did not strongly correlate with the stability at either 0° or 90°. Our findings can provide useful information for understanding varus-valgus stability throughout the range of motion in PS-TKA. Attention to soft tissue balancing is necessary to stabilize a knee at the initial flexion range in PS-TKA.

Background: The influence of tibial resection on the joint gap and on stability against posterior laxity in posterior cruciate ligament-retaining total knee arthroplasty (CR-TKA) remains unclear. In addition, there are no detailed reports regarding how much of the tibial attachment of the posterior cruciate ligament (PCL) is preserved during tibial resection. Our goals were to evaluate the influence of tibial resection on the intraoperative joint gap and on postoperative anteroposterior stability in a clinical population, and to assess the preserved area of the tibial PCL attachment using cadaveric knees., Methods: In 20 consecutive patients, the joint gaps before and after tibial resection at 90° flexion and full extension were analyzed during CR-TKA, and anteroposterior stability was evaluated postoperatively. In 11 cadaveric knees, tibial resection with a thickness of 8, 10, 12, or 14 mm and a posterior slope of 3, 4, 5, 6, or 7° was simulated using computed tomography images, and the percentage of the preserved area of the attachment was calculated., Results: The flexion gaps before and after tibial resection were 18.1 ± 1.9 mm and 18.4 ± 2.2 mm, respectively, with no statistically significant difference (p = 0.08). Similarly, the extension gap did not increase significantly before and after tibial resection (20.8 ± 2.5 mm and 21.0 ± 2.6 mm; p = 0.45). All knees maintained anteroposterior stability at the follow-up period (32.0 ± 1.9 months). The posterior slope of the tibial resection was 5.9 ± 1.4°, and the thickness of the lateral tibial resection was 10.4 ± 1.1 mm. The cutoffs to preserve more than 50% of the attachment were 10-mm thickness and 5° slope., Conclusions: Our results showed that tibial resection did not influence the intraoperative joint gap or postoperative anteroposterior stability. However, our analysis demonstrated that increased amounts of tibial resection led to considerable damage to the attachment., (Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.)

Background: Restoration of normal knee kinematics is key to improving patient satisfaction and functional outcomes after total knee arthroplasty (TKA). However, the effect of preoperative varus-valgus kinematics due to knee osteoarthritis on the postoperative kinematics is unclear. The function of the knee ligament contributes to both knee stability and kinematics. The aim of this study was to evaluate changes in varus-valgus kinematics before and after TKA using a navigation system, in addition to comparing the pre- and postoperative changes in kinematic patterns between cruciate-retaining (CR)- and posterior-stabilized (PS)-TKAs., Methods: Forty knees treated with TKA were evaluated (CR-TKA 20; PS-TKA 20). Manual mild passive knee flexion was applied while moving the leg from full extension to flexion. The varus-valgus angle was automatically measured by a navigation system at every 10° of the flexion angle, and the kinematics were evaluated., Results: Kinematic patterns throughout flexion can be classified into five types. The pre- and postoperative kinematic patterns were similar in 60% of patients who underwent CR-TKA, whereas they were similar in only 25% of those who underwent PS-TKA. The mean change in the size of the varus-valgus angle throughout flexion did not differ between CR-TKA and PS-TKA. However, the distribution of changes in the size of the varus-valgus angle differed between CR-TKA and PS-TKA., Conclusions: We obtained the following results: 1) some patterns of varus-valgus kinematics are noted under unloading conditions despite recovery of neutral alignment in extension and 2) the preoperative varus-valgus kinematic pattern persisted more strongly after CR-TKA than after PS-TKA., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Purpose: In vivo fluoroscopic analyses have revealed the kinematics after total knee arthroplasty (TKA), including femoral condylar lift-off. This study asked whether differences in static varus-valgus laxity or coronal limb alignment after TKA affect lift-off under weight-bearing conditions. It was hypothesised that there is a correlation between coronal laxity or alignment and lift-off during walking., Methods: The current study analysed nineteen subjects undergoing cruciate-retaining TKA performed by the measured resection technique. The varus-valgus laxity at knee extension was measured using a 150 N stress radiograph. The mechanical axis was measured using a full-standing radiograph. Continuous radiological images were taken while the subject walked on a treadmill, and the images during single-leg stance were analysed to determine the lift-off using a 3D-to-2D image-to-model registration technique., Results: The average angle in varus/valgus stress was 6.8 ± 1.8°/6.6 ± 2.1°. No statistically significant differences were observed between the varus and valgus laxity. The average amount of lift-off was 0.7 ± 0.4 mm. The static varus-valgus laxity (n. s.) or the differences in the laxities (n. s.) on the stress radiograph did not influence lift-off. The weight-bearing ratio was achieved within the middle third of the knee in 90 % of subjects. Two outliers with valgus alignment (68 ± 1 %) demonstrated no significant difference in lift-off in comparison with the majority of the subjects (46 ± 9 %)., Conclusion: The static coronal laxity and alignment did not influence the lift-off under dynamic weight-bearing conditions after well-balanced and aligned cruciate-retaining TKA. Measured resection technique can produce sufficient coronal stability and alignment without significant lift-off during walking.

In total knee arthroplasty (TKA), the patella is significantly associated with range of motion and gait performance. Currently, no highly accurate methods are available that can measure the 3D in vivo behavior of the TKA patellar component, as the component is made of x-ray-permeable ultra-high molecular weight polyethylene. Previously, we developed a computer simulation that matches CT scan and unidirectional radiographic images using image correlations, and applied it to kinematic studies of natural and TKA knees. The examination of the measurement accuracy for the patellar bone of a fresh-frozen pig knee joint yielded a root mean square error of 0.2 mm in translation and 0.2° in rotation. In this study, we recruited four patients who had a TKA and investigated 3D movements of the patellar component during squatting. We could visualize the patellar component using the position of the holes drilled for the component peg, and estimated and visualized the contact points between the patellar and femoral components. The principles and the utility of the simulation method are reported. This analytical method is useful for evaluating the pathologies and post-surgical conditions of the knee and other joints., (© 2014 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)

There are several methods for evaluating stability of the joint during total knee replacement (TKR). Activities of daily living demand mechanical loading to the knee joint, not only in full extension, but also in mid-flexion. The purpose of this study was to compare the varus-valgus stability throughout flexion in knees treated with either cruciate-retaining or posterior-stabilised TKR, using an intra-operative navigation technique. A total of 34 knees underwent TKR with computer navigation, during which the investigator applied a maximum varus-valgus stress to the knee while steadily moving the leg from full extension to flexion both before and after prosthetic implantation. The femorotibial angle was measured simultaneously by the navigation system at every 10° throughout the range of movement. It was found that posterior-stabilised knees had more varus-valgus laxity than cruciate-retaining knees at all angles examined, and the differences were statistically significant at 10° (p = 0.0093), 20° (p = 0.0098) and 30° of flexion (p = 0.0252).

A disadvantage to using extramedullary alignment guides of the tibia for total knee arthroplasty (TKA) is difficulty in correctly identifying the ankle center. The anterior border of the tibia is easily palpable, as it is not covered by muscles and its shape is convex anteriorly. We hypothesized that appropriate points exist along the anterior border that can be used as landmarks for extramedullary guides. Prior to TKA, computed tomographic images of the entire tibia were obtained from 101 osteoarthritic knees with varus deformities. The relationship between the lines connecting two points on the anterior border and the mechanical axis was evaluated using 3D imaging software. The mean angles between each of 10 determined axes and the mechanical axis varied from 3.2° varus to 2.1° valgus in the coronal plane. In the sagittal plane, all axes referencing the anterior border of the tibia showed anterior inclination to the mechanical axis. The line connecting the medial one-third of the patellar tendon attachment and the distal one-fourth of the anterior border, however, was highly consistent and parallel to the mechanical axis in the coronal plane. This axis can be effectively used as a landmark for extramedullary guides during TKA., (Copyright © 2011 Orthopaedic Research Society.)

After total knee arthroplasty, it is common for flexion contracture to exist during the early stages of postoperative course. We retrospectively investigated whether the early postoperative contracture would finally disappear, in 104 osteoarthritic knees after surgery with posterior-stabilized prostheses. The knees were divided into 5 groups based on their contracture 3 months after surgery (group I: no contracture, group II: 5°, group III: 10°, group IV: 15°, group V: ≥20°). The proportion of patients with residual contracture (≥5°) 2 years after surgery was 1/34 in group I, 4/30 in group II, 6/23 in group III, 6/6 in group IV, and 11/11 in group V. The results show that flexion contracture eventually existed if the contracture was more than 15° 3 months after surgery., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Although the results of total knee arthroplasty continue to improve, problems related to the patellofemoral joint remain significant. This study examined the factors affecting patellar alignment after total knee arthroplasty and subsequent changes in 56 knees during a postoperative period of 5.3 years. None of the knees examined displayed any clinical complications of the patellofemoral joint; no revision surgeries were necessary, with acceptable patellar alignment on average. The patellar resection angle had a strong influence on patellar alignment. Thinning of the patellar remnant on the medial side can increase postoperative lateral tilt, which leads to a need for lateral retinacular release. Although the changes in patellar alignment were minimal, the tendency that postoperative varus alignment resulted in patellar lateral tilt was observed. As postoperative femorotibial misalignment can lead to patellofemoral problems after total knee arthroplasty, surgeons need to pay scrupulous attention to femorotibial alignment and proper patellar preparation to decrease patellofemoral complications.

A prospective study was performed to compare the clinical and radiological results of mobile- and fixed-bearing total knee arthroplasty with specific attention to rotational alignment and range of motion. Sixty-one knees were assigned to total knee arthroplasty with either the NexGen LPS Flex fixed-bearing or with the NexGen LPS Flex mobile-bearing prosthesis. Postoperatively, knees were compared with regard to range of motion, clinical score, and radiographic findings. Rotational alignment of the femoral and tibial components was evaluated by computed tomography. The median follow-up period was 5.9 years (range 2.1-8.8 years). Median postoperative Knee Society scores were 99 points (68-100) for the fixed-bearing group and 100 points (66-100) for the mobile-bearing group (n.s.). The median postoperative flexion angles of 120° (90°-150°) for the fixed-bearing group and 125° (90°-145°) for the mobile-bearing group were not significantly different from each other (n.s.). No knee required revision surgery due to wear of polyethylene or loosening of the component in either group. Computed tomography showed that 11 knees had rotational mismatches of more than 10° between the femoral and tibial components, but no significant difference was found in the postoperative extension and flexion angles or in the clinical score between the two treatment groups. Using the identical design for both fixed- and mobile-bearing prostheses, this prospective, randomized study did not show any clinical advantages of the mobile-bearing knee. Analysis of rotational alignment by CT scan did not reveal a particular advantage of the self-aligning mechanism of mobile-bearing implants.

Background: Retrieval studies have demonstrated polyethylene wear and deformation of the anterior aspect of the tibial post of posterior-stabilized total knee replacements. We are not aware of any study that has analyzed the effects of the design of the femoral notch and the anterior aspect of the tibial post of posterior-stabilized total knee replacements on contact area, stress, and location. The purpose of the present study was to determine the levels of contact stress generated in three posterior-stabilized total knee replacement designs when the femoral intercondylar notch impinges on the anterior aspect of the tibial post., Methods: The contact area, mean and peak contact stresses, and contact location at the anterior aspect of the tibial post were determined when a posterior force of 100 N was applied to a NexGen LPS Flex, Genesis II, and Scorpio NRG total knee replacement. Measurements were performed at -15 degrees, -10 degrees, -5 degrees, 0 degrees, and 5 degrees of flexion of the femoral component both in neutral and with 5 degrees of rotation of the tibial component. Each measurement was sequentially performed five times, and the data were compared within and between the designs with use of analysis of variance and a post-hoc Scheffé F test., Results: The NexGen LPS Flex exhibited two contact areas on the medial and lateral corners of the anterior aspect of the post, whereas both the Genesis II and Scorpio NRG exhibited a single horizontal band. The NexGen LPS Flex showed the largest total contact area of the three designs at -15 degrees, -10 degrees, and 5 degrees of flexion. The NexGen LPS showed the lowest mean contact stress at -15 degrees and 5 degrees but showed the highest peak contact stress at -5 degrees and 0 degrees. The Scorpio NRG showed the highest mean contact stress under all conditions and showed the highest peak contact stress at -15 degrees, -10 degrees, and 5 degrees. With 5 degrees of rotation of the tibial component, peak contact stress increased, relative to neutral, 1.2 to twofold (depending on the flexion angle) in the Genesis II design., Conclusions: The mean and peak contact stresses were variable for all three designs and the test conditions, approaching and in some cases exceeding the compressive yield stress for polyethylene. The geometry of the metal femoral notch and polyethylene tibial post in the axial and sagittal planes significantly affected contact area, mean and peak stresses, and contact location at the anterior aspect of the tibial post.

Background: Retention of a prosthesis represents an attractive surgical modality for the infected but well-fixed knee prosthesis because patients need to stay in bed after removal of all components. Some additional postoperative treatment would be needed, however, when treated only with débridement because of its low success rate., Methods: In this study, intraarticular antibiotic infusion into the infected joints after débridement, while retaining the implants, was performed for six well-fixed total knee arthroplasties (TKAs), one revision TKA, and five tumor megaprostheses with an average follow-up period of 47.5 months (range 20-82 months). TKA patients with a polyethylene insert or those with all exchangeable components and all polyethylene parts in tumor megaprostheses underwent device removal and thorough débridement of the soft tissues. Subsequently, new polyethylene inserts were implanted in the TKA patients. The removed metallic prostheses were resterilized and reimplanted, and new polyethylene inserts were implanted in the tumor megaprostheses patients. The wound was closed in layers after insertion of a catheter percutaneously. The patients received organism-specific intraarticular antibiotics through the catheter twice a day until the infection disappeared clinically., Results: There was no recurrence of infection in the TKA and revision TKA patients. Four of five knees treated with tumor megaprostheses exhibited recurrence of the infection. Infection was finally healed, however, in all cases by the same treatment procedure., Conclusions: Although some patients experienced recurrence of infection, successful implant salvage was achieved in all cases with the same treatment procedure. Patients do not need to stay in bed during this treatment. Therefore, this method should be considered as one of the treatment options for infected knee prostheses.

This study evaluated the accuracy of an image-free navigated total knee arthroplasty (TKA) system when used to align deformed tibia bone models. The accuracy was assessed in normal, 10 degrees varus, 20 degrees varus, 10 degrees valgus, and 20 degrees valgus tibia bone models (a total of five tibial models) by direct measurement of the navigated cutting guide. The mean angular errors in the tibial mechanical axes of the normal, 10 degrees, and 20 degrees varus models, respectively, were 0.0 degree, 0.7 degree varus, and 2.4 degrees varus. Thus, the errors seen with the two varus models were significantly larger than that associated with the normal model. The mean angular errors were 0.1 degree varus and 0.4 degree valgus in the 10 degrees and 20 degrees valgus models, respectively. These errors were not significantly different from those obtained with the normal model. These results suggest that in varus-deformed knees, image-free navigation has a tendency to cut the tibia in varus. This fact is considered to be one of the reasons for the lack of superiority of TKA alignment in severely deformed knees when using image-free navigation. Therefore, special attention must be paid when using image-free navigation TKA in such cases.

We evaluated the postoperative alignment of 37 primary total knee arthroplasties performed using a computed tomography-based navigation system (Vector Vision Knee 1.5; Brain Lab, Germany) with a new 3-dimensional analysis. The mean coronal femoral angle was 89.0 degrees +/- 1.4 degrees (85.5 degrees -92.8 degrees ), and the coronal tibial component was 89.2 degrees +/- 1.0 degrees (87.4 degrees -91.6 degrees ). The hip-knee-ankle angle was observed to be 178.2 degrees +/- 1.5 degrees (173.9 degrees -181.8 degrees ). The external rotational alignment of the femoral component relative to the surgical epicondylar axis was -0.5 degrees +/- 1.7 degrees (-3.2 degrees to 3.4 degrees ). The results demonstrated that a computed tomography-based navigation system provided a reasonably satisfactory component alignment. The discrepancy between the 2-dimensional and 3-dimensional evaluations was 1.0 degrees +/- 0.9 degrees (0.1 degrees -3.4 degrees ). Three-dimensional analysis is necessary to evaluate the accuracy of the navigation system.

Using duplex ultrasonography, we measured preoperative and postoperative venous flow volume in 32 operated lower limbs without deep vein thrombosis (DVT) after total hip arthroplasty (THA, n = 17) and total knee arthroplasty (TKA, n = 15). We also calculated percentage decrease in mean venous flow volume (MVFV) from before surgery to after surgery. Patients with a history of one of several venous diseases, congestive heart failure, or morbid obesity were excluded. In both groups (THA, TKA), MVFV 3 days after surgery and MVFV 1 week after surgery were significantly lower than preoperative MVFV, but MVFV at 2 or more weeks after surgery did not differ significantly from preoperative MVFV (result 1). Incidentally, the decrease in MVFV in the lower limbs was significantly larger 3 days after TKA than 3 days after THA (result 2). As venous stasis has a central role in thrombus formation, result 1 suggests that the risk for DVT initiation is low at 2 or more weeks after THA and TKA in patients with normal preoperative venous physiologic functions. Result 2 is probably correlated with the evidence that DVT incidence is higher after TKA than after THA.

This study evaluated the mid-term results of total knee arthroplasty (TKA) following high tibial osteotomy (HTO), comparing posterior cruciate-retaining prostheses to posterior stabilized prostheses. The Knee Society score for the entire group (20 knees) improved significantly from 62 (median) preoperatively to 87 at the latest follow-up. The postoperative Knee Society score of 85 in posterior cruciate-retaining prostheses (8 knees) was significantly inferior to the 94 score in posterior stabilized prostheses (12 knees). Of Knee Society score, Stability and ROM scores (17 and 21, respectively) in posterior cruciate-retaining TKA were inferior to those in posterior stabilized TKA (25 and 24, respectively). Since postoperative knee instability due to posterior cruciate ligament (PCL) insufficiency is thought to contribute to the inferior results of posterior cruciate-retaining prostheses after HTO, PCL-substituting TKA would be suitable for use after HTO.

The expectation of returning to sports activities after total knee arthroplasty (TKA) has become more important to patients than ever. To our knowledge, no studies have been published evaluating the three-dimensional knee joint kinematics during sports activity after TKA. Continuous X-ray images of the golf swing and stationary cycling were taken using a large flat panel detector for four and eight post-arthroplasty knees, respectively. The implant flexion and axial rotation angles were determined using a radiographic-based, image-matching technique. Both the golf swing from the set-up position to the top of the backswing, and the stationary cycling from the top position of the crank to the bottom position of the crank, produced progressive axial rotational motions (p = 0.73). However, the golf swing from the top of the backswing to the end of the follow-through produced significantly larger magnitudes of rotational motions in comparison to stationary cycling (p < 0.01). Excessive internal-external rotations generated from the top of the backswing to the end of the follow-through could contribute to accelerated polyethylene wear. However, gradual rotational movements were consistently demonstrated during the stationary cycling. Therefore, stationary cycling is recommended rather than playing golf for patients following a TKA who wish to remain physically active.

Mechanical failure because of wear or fracture of the polyethylene tibial post in posteriorly-stabilised total knee replacements has been extensively described. In this study of 12 patients with a clinically and radiologically successful NexGen LPS posteriorly-stabilised prosthesis impingement of the anterior tibial post was evaluated in vivo in three dimensions during gait using radiologically-based image-matching techniques. Impingement was observed in all images of the patients during the stance phase, although the NexGen LPS was designed to accommodate 14 degrees of hyperextension of the component before impingement occurred. Impingement arises as a result of posterior translation of the femur during the stance phase. Further attention must therefore be given to the configuration of the anterior portion of the femoral component and the polyethylene post when designing posteriorly-stabilised total knee replacements.

We compared the alignment of 39 total knee replacements implanted using the conventional alignment guide system with 37 implanted using a CT-based navigation system, performed by a single surgeon. The knees were evaluated using full-length weight-bearing anteroposterior radiographs, lateral radiographs and CT scans. The mean hip-knee-ankle angle, coronal femoral component angle and coronal tibial component angle were 181.8 degrees (174.2 degrees to 188.3 degrees), 88.5 degrees (84.0 degrees to 91.8 degrees) and 89.7 degrees (86.3 degrees to 95.1 degrees), respectively for the conventional group and 180.8 degrees (178.2 degrees to 185.1 degrees), 89.3 degrees (85.8 degrees to 92.0 degrees) and 89.9 degrees (88.0 degrees to 93.0 degrees), respectively for the navigated group. The mean sagittal femoral component angle was 85.5 degrees (80.6 degrees to 92.8 degrees) for the conventional group and 89.6 degrees (85.5 degrees to 94.0 degrees) for the navigated group. The mean rotational femoral and tibial component angles were -0.7 degrees (-8.8 degrees to 9.8 degrees) and -3.3 degrees (-16.8 degrees to 5.8 degrees) for the conventional group and -0.6 degrees (-3.5 degrees to 3.0 degrees) and 0.3 degrees (-5.3 degrees to 7.7 degrees) for the navigated group. The ideal angles of all alignments in the navigated group were obtained at significantly higher rates than in the conventional group. Our results demonstrated significant improvements in component positioning with a CT-based navigation system, especially with respect to rotational alignment.

The present study evaluated the effects of extent of conformity of post-cam design on contact area and stress at post-cam mechanism using 4 different posterior-stabilized prostheses. TRAC and Alpina with full-conformed post-cams exhibited the largest contact area at 90 degrees and 120 degrees . PFC sigma RPF with partial conformed post-cam had the largest contact area at 150 degrees . Scorpio NRG with less conformed post-cam had smaller contact area than the others. Lifting of femoral component decreased contact area and increased contact stress of TRAC and Alpina. Recent modifications of post-cam design have increased contact area, contributing to lower contact stress. None of these prostheses exhibited constant low contact stress throughout flexion. Further modifications of post-cam mechanism are necessary to provide lower contact stress throughout deep knee flexion.

Kneeling is an important function of the knee for many activities of daily living. In this study, we evaluated the in vivo kinematics of kneeling after total knee arthroplasty (TKA) using radiographic based image-matching techniques. Kneeling from 90 to 120 degrees of knee flexion produced a posterior femoral rollback after both cruciate-retaining and posterior-stabilized TKA. It could be assumed that the posterior cruciate ligament and the post-cam mechanism were functioning. The posterior-stabilized TKA design had contact regions located far posterior on the tibial insert in comparison to the cruciate-retaining TKA. Specifically, the lateral femoral condyle in posterior-stabilized TKA translated to the posterior edge of the tibial surface, although there was no finding of subluxation. After posterior-stabilized TKA, the contact position of the post-cam translated to the posterior medial corner of the post with external rotation of the femoral component. Because edge loading can induce accelerated polyethylene wear, the configuration of the post-cam mechanism should be designed to provide a larger contact area when the femoral component rotates., (c) 2007 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)

We compared a group of 20 patients who had 24 minimally invasive total knee arthroplasties with a similar group of 21 patients who had 25 standard medial parapatellar approach total knee arthroplasties. We wanted to clarify whether the minimally invasive group had an advantage over the standard group in muscle strength, pain level, postoperative recovery, and clinical results and whether the patients were prone to radiographically poor results, more operative time, and increased complications. The extensor and flexor torque, visual analog scale, pace of rehabilitation, Knee Society scores, radiographic findings, operative time, and complications of each group were examined. The minimally invasive group showed higher extensor torque values, higher ratios of postoperative to preoperative extensor torque, and lower average visual analog scale scores at 1 and 2 weeks. The patients in this group achieved straight leg raising, 90[degrees] knee flexion, and T-cane gait earlier. There was no component malalignment, but the tibial component shifted to a more medial position. The mean operative time was 56 minutes longer in the minimally invasive group. We encountered no major perioperative complications in either group. We believe the minimally invasive technique positively contributes to the early restoration of quadriceps strength and a speedy return to normal function., ((C) 2007 Lippincott Williams & Wilkins, Inc.)

Background: Extramedullary alignment guides are commonly used to prepare the tibia during total knee arthroplasty. One disadvantage is that the guide is easily affected by the position of the ankle joint. The tibia may have a rotational mismatch between its proximal and distal ends. We hypothesized that a rotational mismatch might cause incorrect positioning of an extramedullary alignment guide and evaluated such a mismatch on the predicted postoperative coronal alignment of the tibia., Methods: Fifty-three osteoarthritic knees with varus deformity in fifty-one patients were evaluated with use of computerized tomography scans before total knee arthroplasty. We defined one anteroposterior axis of the ankle joint and five different anteroposterior axes of the proximal aspect of the tibia using three-dimensional bone models from the computerized tomography data. We measured the rotational angle between the anteroposterior axis of the ankle joint and the proximal part of the tibia. The distal end of the extramedullary guide was placed in front of the center of the ankle joint (on the line of the extended anteroposterior axis of the ankle joint), and the proximal end was placed on the line of the extended anteroposterior axis of the proximal part of the tibia. We established spatial coordinates to evaluate the effect of the rotational angle on the predicted postoperative coronal alignment of the tibia and calculated the presumed tibial coronal alignment., Results: The rotational angle was positive (3.6 degrees to 19.7 degrees) for all of the anteroposterior axes of the proximal aspect of the tibia, indicating that the ankle joint was externally rotated relative to the proximal part of the tibia. The predicted tibial coronal alignment was varus (0.5 degrees to 5.1 degrees) for all of the anteroposterior axes of the proximal part of the tibia., Conclusions: When an extramedullary alignment guide is used to prepare the tibia in total knee arthroplasty, varus alignment of the tibial component can occur because of a rotational mismatch between the proximal part of the tibia and the ankle joint.

If surgeons see the shaft of the extramedullary guide from lateral to the guide during preparation of the proximal tibia resection during total knee arthroplasty, the tibial component may be implanted in varus position in the frontal plane. In order to clarify the effect of the angle of the surgeons' sight relative to the sagittal plane and the posterior slope angle of the resected surface on varus position of the tibial component in the frontal plane, mathematical analysis was performed. Three-dimensional coordinate system was utilized so that the central axis of the tibial shaft on the Z-axis and the shaft of the guide were skew. The relationship between two lines was analyzed solving equations on three dimensional planes. When the posterior slope angle is 10 degrees, and if surgeons see the shaft of the guide 10 degrees, 20 degrees and 30 degrees lateral to the sagittal plane, and the shaft and the central axis of the tibial shaft would seem to be parallel, the true varus tilt angle of the shaft on the frontal plane is 1.8 degrees, 3.7 degrees and 5.8 degrees, respectively. The extramedullary guide should be seen straight in front of the guide.

We have previously developed a radiographic technique, the oblique posterior condylar view, for assessment of the posterior aspect of the femoral condyles after total knee arthroplasty. The purpose of this study was to confirm the validity of this radiographic view based upon intra-operative findings at revision total knee arthroplasty. Lateral and oblique posterior condylar views were performed for 11 knees prior to revision total knee arthroplasty, and radiolucent lines or osteolysis of the posterior aspect of the femoral condyles were identified. These findings were compared with the intra-operative appearance of the posterior aspects of the femoral condyles. Statistical analysis showed that sensitivity and efficacy were significantly better for the oblique posterior condylar than the lateral view. This method can, therefore, be considered as suitable for routine follow-up radiographs of the femoral component and in the pre-operative planning of revision surgery.

We measured the contact areas and contact stresses at the post-cam mechanism of a posterior-stabilised total knee arthroplasty when a posterior force of 500 N was applied to the Kirschner Performance, Scorpio Superflex, NexGen LPS Flex Fixed, and NexGen LPS Flex Mobile knee systems. Measurements were made at 90 degrees, 120 degrees, and 150 degrees of flexion both in neutral rotation and 10 degrees of internal rotation of the tibial component. Peak contact stresses at 90 degrees, 120 degrees, and 150 degrees were 24.0, 33.9, and 28.8 MPa, respectively, for the Kirschner; 26.0, 32.4, and 22.1 MPa, respectively, for the Scorpio; and 34.1, 31.5, and 32.5 MPa, respectively, for the NexGen LPS Flex Fixed. With an internally rotated tibia, the contact stress increased significantly with all the fixed-bearing arthroplasties but not with the NexGen LPS Flex Mobile arthroplasty. The post-cam design should be modified in order to provide a larger contact area whilst avoiding any impingement and edge loading.

Using three-dimensional computed tomography in 50 osteoarthritic knees, we simulated at various cutting angles the tibial cut for total knee arthroplasty. Cutting angles of 0 degrees, 3 degrees, 5 degrees, 7 degrees, 9 degrees, and 11 degrees were used. We then calculated the anterior and posterior thicknesses, the medial-lateral widths, and the medial and lateral condylar depths of the resected tibial bone at each cutting angle. Each set of measurements was evaluated according to a comparison between the cutting angle and the anatomic posterior slopes. The cutting angles showing the smallest anterior-posterior difference at the medial and lateral plateaus were 9 degrees and 7 degrees, respectively. The mean anatomic posterior slopes at the medial and lateral plateaus were 9.0 degrees and 8.1 degrees, respectively. When the tibia was cut at the cutting angle closest to the medial anatomical posterior slope in each knee, the thickness of the lateral posterior plateaus resected from 12 knees (24%) was more than 10 mm. Among these 12 knees, the cutting angle was more than 9 degrees in 9 knees (75%). In contrast, when the tibia was cut at the cutting angle closest to the lateral anatomical posterior slope, only one resected medial posterior plateau was more than 10 mm. The cutting angle of this case was 7 degrees. Therefore, in consideration of the thickness of bone resection from anatomic posterior slope, we demonstrated the importance of using the lateral anatomic posterior tibial slope as a guide to the tibial cut. There was no significant difference with respect to resected bone morphology at any cutting angle.

Our study evaluated the accuracy of an image-guided total knee replacement system based on CT with regard to preparation of the femoral and tibial bone using nine limbs from five cadavers. The accuracy was assessed by direct measurement using an extramedullary alignment rod without radiographs. The mean angular errors of the femur and tibia, which represent angular gaps from the real mechanical axis in the coronal plane, were 0.3 degrees and 1.1 degrees, respectively. The CT-based system, provided almost perfect alignment of the femoral component with less than 1 degrees of error and excellent alignment with less than 3 degrees of error for the tibial component. Our results suggest that standardisation of knee replacement by the use of this system will lead to improved long-term survival of total knee arthroplasty.

Background: It is often difficult to evaluate the posterior aspects of the femoral condyles after total knee arthroplasty. We have developed an imaging technique involving the use of the oblique posterior condylar view for the evaluation of the posterior aspects of the femoral condyles. The purpose of the present study was to compare the efficacy of this view with that of the true-lateral view., Methods: Three orthopaedic surgeons analyzed fifty-five sets of radiographs (consisting of oblique posterior condylar and true-lateral views) for patients who had undergone total knee arthroplasty. The accuracy and reproducibility of the oblique posterior condylar view for the detection of radiolucencies were compared with those of the true-lateral view., Results: The oblique posterior condylar view was significantly better than the true-lateral view for the detection of radiolucencies of the posterior aspects of the femoral condyles (p < 0.0005)., Conclusions: Radiographic analysis with use of the oblique posterior condylar view is technically easy and is accurate for the evaluation of radiolucencies of the posterior aspects of the femoral condyles after total knee arthroplasty.

In total knee arthroplasty (TKA) following failed high tibial osteotomy, the mechanical axis does not intersect the center of the tibial component if the tibia has been resected perpendicular to the anatomical axis. Therefore, tibial resection referencing the predicted postoperative mechanical axis instead of the tibial shaft axis is advocated. To obtain the optimal tibial resection, characteristics of the tibial proximal deformity were measured radiographically and predicted postoperative lower limb alignment was calculated using full-length, weight-bearing, lower limb anteroposterior radiographs. Two finite element analysis models also were examined. The proximal tibia was resected perpendicular to the tibial shaft axis in model 1, and perpendicular to the predicted postoperative tibial mechanical axis in model 2. When the proximal tibia was resected perpendicular to the tibial shaft axis, the predicted lower limb mechanical axis was significantly shifted medially to the center of the tibial joint surface. The results of the finite element analysis reflected the medial shift of the lower limb mechanical axis in model 1, where stresses were increased in the medial tibial compartment. Tibial resection referencing the predicted postoperative tibial mechanical axis, instead of the tibial shaft axis, should be performed, especially in cases with a deformed tibia.

Predicted postoperative knee alignment was calculated when total knee arthroplasty was performed after 1 of 3 different methods of tibia preparation in 30 osteoarthritic knees with varus deformity. In Method 1, the tibia was cut perpendicular to the tibial shaft. In Method 2, the tibia was cut perpendicular to a line connecting the center of the tibial plateau and the center of the talar dome. In method 3, tibial resection was determined with an original template so that tibial resection would be perpendicular to a line connecting the center of the resected tibial plateau and the center of the talar dome. Methods 1 and 2 caused significantly more valgus alignment than Method 3 (P<.0001). The postoperative weight-bearing ratio was in Method 1, 57.7%, in Method 2, 53.6% and 50.0% in Method 3. These results suggest that cutting the tibia perpendicular to the tibial shaft can cause valgus alignment in total knee arthroplasty for varus knees., (Copyright 2003, Elsevier Science (USA). All rights reserved.)

This study evaluated the changes in anteroposterior stability at flexion and extension following posterior cruciate ligament (PCL)-retaining and PCL-substituting total knee arthroplasty (TKA), in comparison with normal knees. Altogether, 29 knees of 24 patients underwent either PCL-retaining ( n = 19) or PCL-substituting ( n = 10) TKA. Anteroposterior displacement was measured with a KT-2000 arthrometer preoperatively, 1 month after surgery, and again an average of 3 years after surgery. Anteroposterior stability at flexion and extension did not change following PCL-retaining TKA and was not significantly different from that of normal subjects, whereas anteroposterior stability increased following PCL-substituting TKA and was significantly greater than that of normal subjects an average of 3 years after surgery.

This study examined factors that influence patellar tracking after total knee arthroplasty. A total of 62 knees were evaluated radiographically for postoperative patellar tracking. Six factors were examined regarding their influence on postoperative patellar tracking. This study showed the effects of patellar component position, patellar resection angle, and lateral retinacular release on postoperative patellar tracking. There was no significant effect of the remaining 3 factors: the thickness of the patellar resection, preoperative patellar tilt, and rotational alignment of the femoral component. A medialized patellar component and obliquity of resection of the patella are effective for obtaining proper patellar tracking, whereas the evaluation of the influence of the external rotation of the femoral component requires more clinical studies., (Copyright 2002, Elsevier Science (USA))

We developed a new patella-cutting guide that simplifies proper alignment and enables resection of the correct thickness of bone. This guide consists of a central shaft, two support frames, and a ring. The ring consists of upper and lower disks, with a slot between the disks. The central shaft and the lower disk have holes for fixation pins. The distance from the distal end of the central shaft to the lowest level of the slot is 8 mm. Bone of the same thickness as that of the patellar component can be automatically resected using this guide. A feeler gauge is inserted through the slot, and the periarticular region is felt. This procedure enables the guide to be set at the correct angulation. A laboratory study using fresh-frozen cadaver patella specimens and a clinical study showed that proper alignment and proper resection were achieved using this guide.

Rotational alignment of the femoral and tibial components using computed tomography (CT) was evaluated to establish if errors of alignment have a significant effect on patellofemoral complications. From 1987-1990, 54 knees in 39 patients were replaced with the Miller-Galante I knee system. Of these, 10 patients (13 knees) comprised this study. All patients had osteoarthritis. Mean patient age at surgery was 70.3 years. Mean follow-up was 10.3 years. On CT, rotational position of the femoral component relative to the epicondylar axis and the position of the tibial component relative to the tibial tubercle were evaluated. Patellar displacement and patellar tilt angle also were evaluated when the knee was flexed at 30 degrees. Mean rotation of the femoral component was 6.1 degrees of internal rotation (2.7 degrees-11.2 degrees). Mean rotation of the tibial component was 16.7 degrees of internal rotation (2.4 degrees-27.7 degrees). Mean lateral patellar tilt angle was 2.9 degrees (-6.0 degrees-11.9 degrees), and mean lateral displacement was 2.7 mm (-3.2-8.9 mm). Rotational position of both the femoral and tibial components showed a statistically significant correlation with the patellar tilt angle. This study showed the internally rotated femoral and tibial component were related to the patellar maltracking. This malalignment of the components, as well as nonanatomical patellar groove and metal-backed patellar component, could be one of the causes of the patellofemoral complications with the Miller-Galante I knee.

The effect of anatomic variations on the operative techniques used in total knee arthroplasty (TKA) was assessed. In 133 Japanese patients with medial osteoarthritis (OA), six parameters were measured on anteroposterior radiographs of the lower extremities taken with the patients in the supine position. The results showed that the characteristics of the knees were bowing of the femoral shaft and proximal tibia vara, with lateral offset of the tibial shaft with respect to the center of the tibial plateau. The angle between a perpendicular to the mechanical axis and the tangent to the distal femoral condyles can be used in determining the external rotation of the femoral component. This angle was more than 3 degrees in 20% of the patients. The femoral component should therefore be externally rotated more than 3 degrees relative to the posterior condylar line in such patients. Because the center of the tibial plateau is located medial to the central line of the tibial shaft in knees with medial OA, the central point of the tibial articular surface should not be used for alignment of the tibial component. The medial offset stem of the tibial component may impinge against the medial wall. Anatomic variations should be evaluated before TKA is attempted.

Anteroposterior knee laxity was evaluated in 14 patients (19 knees) who had posterior cruciate ligament retaining total knee arthroplasty using the Miller Galante I prosthesis. The followup ranged from 87 to 118 months (average, 105.9 months), and the measurements were done using the KT-2000 arthrometer. The mean anteroposterior displacement with the knees with Miller Galante I prostheses was 10.1 mm at 30 degrees flexion and 8.1 mm at 75 degrees flexion. In the 15 knees with Miller Galante I prostheses with flexion greater than 90 degrees, seven had less stability at 75 degrees than at 30 degrees flexion. These knees were considered to have a nonfunctional posterior cruciate ligament, and they had a worse Knee Society score (81.1) than did the other eight knees with Miller Galante I prostheses (89.9). There were four knees in which the flexion was less than 90 degrees. In this study, approximately half of the knees with posterior cruciate ligament retaining total knee arthroplasty did not have good anteroposterior stability in flexion an average of 9 years after surgery.

Changes in limb alignment after total knee arthroplasty were evaluated in 20 knees replaced with the Miller Galante knee system. The mean follow-up period was 87.4 months. Seventeen of the 20 knees were in the varus position on the initial postoperative radiographs, but the alignment significantly changed to become even more aligned toward varus during the follow-up period. The thickness of the ultra-high-molecular-weight polyethylene (UHMWPE) also decreased significantly in the medial femorotibial joint. The wear of the UHMWPE possibly changed the alignment, and the postoperative alignment had a positive correlation with the wear rate. The components should be implanted so that the mechanical axis intersects the center of the components to prevent worsening of alignment as well as to minimize any such wear.

We examined the reliability of the anteroposterior and posterior condylar axes for determining rotational alignment of the femoral component in total knee arthroplasty (TKA). A computed tomography scan was taken at the level of the femoral epicondyle in 84 knees (27 varus knees with medial femorotibial arthritis (FT-OA) in 26 patients, 17 knees with patellofemoral arthritis in 14 patients, and 40 normal knees in 40 volunteers). On the image, an anteroposterior axis, a line perpendicular to the anteroposterior axis, an epicondylar axis and a posterior condylar axis were drawn, and the relationship between the three axes was assessed. The mean values for the 84 knees were evaluated, and the posterior condylar axis was 6.0 degrees +/- 2.4 degrees internally rotated relative to the epicondylar axis, while the line perpendicular to the anteroposterior axis was 1.4 degrees +/- 3.3 degrees internally rotated relative to the epicondylar axis. The internal rotation angle of the posterior condylar axis relative to the epicondylar axis was 6.2 degrees +/- 1.9 degrees in the knees with medial femorotibial arthritis, 6.4 degrees +/- 2.4 degrees in the knees with patellofemoral arthritis, and 5.8 degrees +/- 2.7 degrees in the normal knees, showing consistent values in normal and osteoarthritic knees. The internal rotation angle of the line perpendicular to the anteroposterior axis relative to the epicondylar axis was 0.1 degrees +/- 3.3 degrees, 1.3 degrees +/- 3. 3 degrees, and 2.3 degrees +/- 3.1 degrees in the three groups, respectively (i.e., there were significant differences between the medial FT-OA knees and the normal knees). The results demonstrated that the anteroposterior axis was rotated externally to a significant degree in medial FT-OA knees and was less reliable than the posterior condylar axis for use in alignment for TKA on medial FT-OA knees.