Search

Background: While cementless short stems have become popular in total hip arthroplasty (THA), Metha is a relatively recent development that differs from other short stems in its initial fixation concept of partial collum-sparing metaphyseal anchorage. The purpose of this study was to quantify the contact state between Metha and the femur. Additionally, we investigated the difference in contact points between Meta and Fitmore, which is one of the more popular curved short stems., Methods: We conducted a retrospective review of 42 hips that underwent THA using Metha and 41 hips using Fitmore. Stem-to-femur contact was evaluated by density mapping using a three-dimensional digital template system to quantify the contact condition according to the modified Gruen zone. The criterion for the stem-to-bone contact boundary was defined as a computed tomography value of 543 Hounsfield., Results: Quantitative evaluation of Metha according to the modified Gruen zones showed the ratio of surface area with high cortical contact in each zone. The results were 4.6% ± 5.7% in zone 1, 0.9% ± 2.3% in zone 2, 19.1% ± 12.9% in zone 3, 1.4% ± 3.2% in zone 5, 29.6% ± 16.4% in zone 6, and 25.1% ± 17.7% in zones 7. Evaluation of Fitmore for the same zones was as follows: 1.6% ± 2.4%, 18.5% ± 16.9%, 20.8% ± 17.4%, 12.7% ± 12.8%, 3.7% ± 5.8%, and 13.3% ± 10.3%. Comparing the two groups, the contact area was significantly greater for Metha in zones 1, 6 and 7 and Fitmore in zones 2 and 5 ( p < 0.05)., Conclusions: It is possible for Metha to achieve metaphyseal anchoring by contacting the cortical bone at the proximal femur, thus avoiding proximal offloading. To the best of our knowledge, no previous studies have quantitatively reported stem-to-cortical bone contact conditions in curved short stems., Competing Interests: CONFLICT OF INTEREST: No potential conflict of interest relevant to this article was reported., (Copyright © 2024 by The Korean Orthopaedic Association.)

Background: Anterior quadratus lumborum block (AQLB) is one of the compartment blocks and has recently attracted attention as a new method of analgesia for postoperative hip surgery analgesia. This study aimed to compare the analgesic efficacy of AQLB in patients undergoing primary total hip arthroplasty (THA)., Methods: There were 120 patients undergoing primary THA under general anesthesia randomly allocated to receive a femoral nerve block (FNB) or an AQLB. The primary outcome was total morphine consumption over the initial 24-hour postoperative period. Secondary outcomes included the pain score evaluation while at rest and during active and passive motion over the 2 days following surgery and the manual muscle testing of the quadriceps femoris. The numerical rating scale (NRS) score was used for evaluating the postoperative pain score., Results: There were no significant differences between the 2 groups concerning morphine consumption within 24 hours after surgery (P = .72). The NRS score at rest and passive motion were similar at all-time points (P > .05). However, there was a statistically significant difference in pain reported during the active motion for the FNB group compared to the AQLB (P = .04). No significant differences were found between the 2 groups concerning muscle weakness incidence., Conclusion: Both AQLB and FNB demonstrated adequate efficacy for postoperative analgesia at rest in THA. However, based on our study, whether AQLB is inferior or noninferior to FNB as an analgesic method for THA was inconclusive., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Purpose: The purpose of the present study was to investigate the results of total hip arthroplasty (THA) using the Bicontact D stem with a minimum 10 year follow-up that focused on patients with developmental dysplasia of the hip (DDH)., Methods: One hundred five patients with osteoarthritis due to DDH who underwent primary THA were included in this study. The mean final follow-up period was 12.7 ± 1.2 years (range 10-15 years). All cases were evaluated both clinically and radiographically, and Kaplan-Meier survivorship was determined as stem revision for any reason as the end point., Results: Modified Harris hip score averaged 89.0 ± 1.1 (range 60-98) at the final follow-up. The survivorship was 99.0% (95% confidence interval 93.4-99.9%) at 15.0 years, and only one hip with a well-fixed stem required stem revision due to recurrent dislocations. Cortical hypertrophy (CH) was observed in 40 of 105 hips (38.1%), and stress shielding (SS) progressed to grade 3 or 4 in six hips (6 of 105 hips: 5.7%) during the study period. Among the six hips with progressed SS, Dorr type C proximal femoral geometry was seen in five hips., Conclusion: This study of 105 THAs using the Bicontact D stem that focused on DDH patients with a minimum 10 year follow-up period achieved satisfactory clinical and radiological outcomes. Dorr type C proximal femoral geometry could be considered a risk factor for progressed SS., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Purpose: Combined anteversion (CA) technique (stem-first procedure) has become generally accepted as an ideal means to achieve optimal CA value in THA. However, we hypothesized that CA technique for patients with various native femoral anteversions could pose a risk of anterior or posterior cup protrusion. In the present study, we examined whether it is possible to use the taper wedge stem to change the stem version to achieve optimal CA while avoiding cup protrusions with the cup-first procedure through minimally invasive (MIS) antero-lateral approach., Methods: Eighty-one patients underwent cup-first THA with a taper wedge stem. The acetabular cup was placed following the preoperative planning of the cup alignment to avoid anterior cup protrusions using CT-based navigation. Following the CA theory, anteversion of the taper wedge stem was changed to the target anteversion from the patient's native femoral anteversion. The native femoral anteversion, the change in version angle of the stem, postoperative CA and the length of anterior cup protrusions were evaluated in postoperative CT measurements., Results: The native femoral anteversion averaged 25.7° ± 8.9° (range 8°-45°). Cases with increased and decreased stem anteversion were observed in 42 hips (51.8%) and 33 hips (40.7%), respectively. The amount of increased and decreased version angles averaged 7.7° ± 4.8° (range 2°-21°) and 7.8° ± 5.1° (range 2°-20°), respectively. Postoperative CA values averaged 36.7° ± 3.4° (range 29.4°-44.2°) and anterior cup protrusion length averaged 2.0 mm ± 2.6 mm (0 ~ 8.8 mm) in axial view and 0.4 mm ± 1.0 mm (0 ~ 3.6 mm) in sagittal view. Anterior cup protrusion of more than 10 mm was not observed in any hips., Conclusion: This procedure can be considered as an option to achieve optimal CA anteversion while avoiding anterior cup protrusion in THA.

Purpose: Combined anteversion (CA) technique (stem-first procedure) is generally accepted as the optimal technique to attain an appropriate CA value in total hip arthroplasty (THA). However, cup anteversion is strongly influenced by the native femoral anteversion. Accordingly, anterior protrusion of the cup in the acetabulum might occur. The purpose of the present study is to investigate the achievement of the optimal CA while avoiding anterior cup protrusion and examine the significance of our new CA technique with cup-first procedure in hybrid THA., Methods: Seventy-nine hybrid THAs with the cup-first procedure used a CT-based navigation system for cup positioning. In the preoperative planning, cup anteversion was aimed at approximately 20°. However, in actuality, sufficient cup coverage in the original acetabulum based on individual anatomy is given priority over cup placement based on CT-based planning to ensure adequate cup coverage. The target stem anteversion was determined following Widmer's mathematical formula (37.3 = femoral stem anteversion × 0.7 + cup anteversion). Cemented stem was inserted according to the target stem anteversion angle., Results: Regarding the assessment of overall alignment, the calculated Widmer's CA values during surgery and postoperative CT evaluation were 34.1° ± 6.0° (range 20.7°-51.2°) and 35.1° ± 6.7° (range 21.6°-50.7°). There were 72 hips (91.1%) within 25°-50° of CA. Cup protrusion length averaged 2.0 mm ± 2.6 mm (0-8.8 mm) in the axial view and 0.4 mm ± 1.0 mm (0-3.6 mm) in the sagittal view. Cup protrusion length of more than 5 mm was indicated in 10 hips, and no hips observed more than 10 mm., Conclusion: Our new CA technique (cup-first procedure) with hybrid THA was able to achieve optimal CA value while avoiding anterior cup protrusion.

Kerboull-type acetabular support rings (KT) and allogenic bone graft were used for severe periacetabular bone loss with primary and revision total hip arthroplasty (THA). The purpose of this case-control study is to evaluate the risk factors related to poor outcomes of surgery.Sixty patients underwent primary THA and revision THA using allogenic bone graft with KT for large acetabular deficiency. These patients were retrospectively evaluated postoperatively and followed-up by radiograph. The minimum follow-up period was 4 years and averaged 7 years. A radiological failure was defined by the following criteria:Expected risk factors were defined as female, age >75 years, body mass index (BMI) >25%, medical history of hypertension, renal failure, liver steatosis, diabetes, hyperlipidemia, cardiac infarction, smoking, American Academy of Orthopedic Surgery (AAOS) classification III or IV, bleeding>500 mL, time of surgery >3hours, high hip center-type KT, inclination of KT >45 degrees, screw angle >25 degrees, morselized bone graft, Kawanabe's classification stage 3 or 4 and revision surgery. Nineteen hips (31.6%) revealed radiological failure according to our criteria, and revision THA was performed in 2 hips (3.3%). In the statistical analysis, morselized bone graft and high hip center-type KT were identified as factors of poor outcomes of surgery.

Background: Postoperative pain is a significant concern of patients before surgery. Multimodal pain management is an effective method of pain control after major orthopedic surgery. Acetaminophen is the most commonly used analgesic for the management of pain. It was hypothesized that 1000 mg of intravenous acetaminophen (IA) dosed every 6 hours would significantly reduce the postoperative pain score at rest and the opioid consumption volume in patients who would undergo total hip arthroplasty (THA) when compared to a control group., Methods: A single-center, prospective, open-label randomized control study was conducted. A total of 97 patients undergoing unilateral primary THA were divided into 2 groups: the study group (IA) (n = 45) and the control group (n = 52). The study group received administered IA after surgery, while the control group received only a standard pain control. Both groups received a preoperative femoral nerve block and postoperative intravenous fentanyl citrate. The primary outcome was the evaluation of the pain score at rest 24 hours after surgery. The pain score was measured using the Numerical Rating Scale. The primary outcome of this study was analyzed using generalized estimating equation., Results: The IA group had a significant improvement in Numerical Rating Scale score at rest 24 hours after THA compared to the control group (-0.91, 95% confidence interval -1.56 to -0.26, P = .006), suggesting a positive effect of IA usage for pain relief. The total fentanyl citrate consumption after surgery for 24 hours was significantly lower in the IA group than those of the control group (52.07 ± 7.64 vs 57.83 ± 12.44 mg, P < .001)., Conclusion: Postoperative administration of IA significantly reduced the postoperative pain score and opioid consumption volume after primary THA. IA was useful as one role of multimodal pain management after THA., Level of Evidence: Level 2., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Objective: To evaluate the impact of spinopelvic parameters and hip contracture on change in the pelvic tilt (PT) after Total hip arthroplasty (THA)., Methods: One hundred patients (15 male and 85 female) who underwent THA were included in this prospective study. Radiographic data were obtained preoperatively and 1 year after THA. Radiographic parameters included sagittal anterior pelvic plane (APP), sagittal vertical axis (SVA), sacral slope (SS), pelvic inclination (PI), and lumbar lordosis angle (LL). The APP was defined as the angle between the anterior pelvic plane and the vertical plane. A positive value indicates pelvic retroversion. Postoperative changes in PT were divided into three groups: the PA group (pelvic anteversion, ΔAPP < -5°), the PR group (pelvic retroversion, ΔAPP > 5°), and the PT group (minimal change, ΔAPP ≤ ± 5°). The Kruskal-Wallis test and the Steel-Dwass test were used to compare the preoperative and postoperative spinopelvic parameters among the three groups. The Spearman's rank correlation coefficient was used to evaluate the correlation between ΔAPP and spinopelvic parameters., Results: Minimal change in pelvic tilt was observed in 59% of patients, while pelvic anteversion was observed in 16% of patients and pelvic retroversion was observed in 25% of patients. There were no significant changes in the spinopelvic parameters, including TK, LL, SVA, LL, SS, and APP after THA. The Femoral angle (FA) was significantly decreased after THA (P < 0.001). Preoperative APP was significantly more retroverted in the PA group than the PR group, and the PT group (6.8 ± 12.2, 0.2 ± 9.9, -8.3 ± 8.3, P < 0.001). Preoperative SS, PI-LL, and PI were significantly smaller in the PA group than the PT group and the PR group. A significant negative correlation was identified between preoperative APP and ΔAPP (r = -0.418, P < 0.001)., Conclusion: Approximately 60% of the patients did not have any marked change in PT after THA. Preoperative APP was the only predictive factor associated with marked anterior or posterior change in PT., (© 2019 The Authors. Orthopaedic Surgery published by Chinese Orthopaedic Association and John Wiley & Sons Australia, Ltd.)

Purpose: In the combined anteversion (CA) technique for total hip arthroplasty (THA) with a cementless stem, cup anteversion is strongly influenced by the native femoral anteversion. It is hypothesized that in cases with large native femoral anteversion, cup anteversion can be decreased, and anterior cup protrusion from the anterior edge of the acetabulum could occur due to the achievement of optimal CA. In this study, the accuracy of CA in THA with the CA technique using imageless navigation and the relationship between the protrusion of the anterior edge of cup and optimum CA was retrospectively evaluated., Methods: Ninety-seven patients (104 hips) who underwent primary THA by the CA technique using image-free navigation were enrolled in the study. The femoral stem was placed following the individual femoral anteversion so that the target cup anteversion could be determined following a mathematical formula (37 = femoral stem anteversion × 0.7 + cup anteversion). Results The resulting CA values effectively achieved accurate CA with 39.49 ± 5.03° postoperatively. On the other hand, anterior cup protrusion was measured by computed tomography image. A cup protrusion length of more than 3 mm was indicated for 60 cases (57.7%). All included patients were divided into two groups: Group 1 as protrusion positive and Group 2 as protrusion negative. In Group 1, preoperative femoral anteversion and postoperative stem anteversion were significantly higher, while postoperative cup anteversion was significantly lower. However, the postoperative CA value indicated no significant difference between the groups., Conclusions: The CA (stem-first) technique with image-free navigated THA could effectively achieve accurate CA. On the other hand, a large number of cases revealed anterior cup protrusion due to the low cup anteversion.

Rationale: Total hip arthroplasty (THA) concomitant with subtrochanteric femoral shortening osteotomy for Crowe type IV dysplastic hip has been reported. However, the combination of subtrochanteric femoral osteotomy and revision THA has only been mentioned in one case report., Patient Concerns: A 67-year-old female had a history of congenital dislocation of both hips., Diagnoses: Right hip was diagnosed the aseptic loosening of THA with extremely high replacement of the acetabular component., Interventions: Revision THA concomitant with subtrochanteric femoral shortening osteotomy using a cement stem was performed. Before the revision surgery, primary THA with subtrochanteric shortening osteotomy was performed on the opposite side. Regarding leg length, the actual leg length of the affected side was 9 mm longer, and the subjective leg length discrepancy was 45 mm shorter in the affected limb due to pelvic obliquity. Subtrochanteric osteotomy was performed with an amount of osteotomy equal to the amount of distal translation of the hip center to the original acetabulum., Outcomes: As a result, pelvic obliquity improved, and the subjective leg length discrepancy disappeared after revision surgery., Lessons: The combination of subtrochanteric femoral shortening osteotomy with revision THA resulted in a satisfactory outcome.

Implant positioning is one of the critical factors that influences postoperative outcome of total hip arthroplasty (THA). Malpositioning of the implant may lead to an increased risk of postoperative complications such as prosthetic impingement, dislocation, restricted range of motion, polyethylene wear, and loosening. In 2012, the intraoperative use of smartphone technology in THA for improved accuracy of acetabular cup placement was reported. The purpose of this study was to examine the accuracy of an iPhone/iPad-guided technique in positioning the acetabular cup in THA compared with the reference values obtained from the image-free navigation system in a cadaveric experiment. Five hips of 5 embalmed whole-body cadavers were used in the study. Seven orthopedic surgeons (4 residents and 3 senior hip surgeons) participated in the study. All of the surgeons examined each of the 5 hips 3 times. The target angle was 38°/19° for operative inclination/anteversion angles, which corresponded to radiographic inclination/anteversion angles of 40°/15°. The simultaneous assessment using the navigation system showed mean±SD radiographic alignment angles of 39.4°±2.6° and 16.4°±2.6° for inclination and anteversion, respectively. Assessment of cup positioning based on Lewinnek's safe zone criteria showed all of the procedures (n=105) achieved acceptable alignment within the safe zone. A comparison of the performances by resident and senior hip surgeons showed no significant difference between the groups (P=.74 for inclination and P=.81 for anteversion). The iPhone/iPad technique examined in this study could achieve acceptable performance in determining cup alignment in THA regardless of the surgeon's expertise. [Orthopedics. 2016; 39(4):e621-e626.]., (Copyright 2016, SLACK Incorporated.)

Implant positioning is one of the critical factors influencing postoperative outcomes in total hip arthroplasty (THA). Several studies have reported that the postoperative antetorsion (AT) measurement for the femoral stem inserted without navigation showed wide variability. The current authors developed a simple instrument, the Gravity-guide (G-guide), for intraoperative assessment of stem AT and adjustment. They evaluated the effectiveness of the G-guide with postoperative computed tomography (CT) examination. Ninety patients (96 hips) who underwent primary THA using the G-guide for stem adjustment were evaluated. The G-guide consists of 2 parts: one attached to the lower leg and the other attached to the handle of the rasp. The G-guide was used to evaluate the AT at the time of inserting the final rasp. In addition, the AT value in the G-guide evaluation system required correction by the angle obtained in the preoperative epicondylar view. Intraoperative stem AT was defined as the sum of the intraoperative G-guide value and the correction angle. Postoperative AT was evaluated by CT examination. The discrepancy between the intra- and postoperative measurements was 4.6°±4.1°. Acceptable accuracy with discrepancy of less than 5° and 10° was achieved in 66 (69%) hips and 85 (89%) hips, respectively. The use of the G-guide could effectively reduce the variability of stem anteversion compared with manual adjustment. This study proved the effectiveness of the newly developed G-guide system in intraoperative stem AT adjustment., (Copyright 2016, SLACK Incorporated.)

Purpose: In total hip arthroplasty (THA), combined anteversion (CA) is used as a parameter for assessment of overall prosthetic alignment. The purpose of this study was to comparatively examine the CA value in patients who underwent primary THA using the image-free navigation system either with a cup-first or stem-first technique., Methods: Eighty-three hips undergoing primary THA using the OrthoPilot® image-free navigation system (B. Braun-Aesculap, Tuttlingen, Germany) were included in this study. The patient population was divided into two groups depending on the procedure used: cup-first technique and stem-first technique. In the cup-first group, inclination and anteversion (AV) angles were targeted at 35-45° and 15-25°, respectively, while stem antetorsion (AT) was determined for each patient based on the amount of individual native femoral AT angle. In the stem-first group, the femur was prepared first with the target angle corresponding to the native femoral AT and the cup AV was decided considering the CA calculated with Widmer's formula (aiming at the optimal Widmer's CA of 37.3°)., Results: Better consistency in Widmer's CA values was attained in the stem-first group as indicated by the smaller SD values. In the assessment of overall alignment, Widmer's CA values were within the satisfactory range (37 ± 5°) in 41.9 and 92.3 % of the subjects in the cup-first group and the stem-first group, respectively., Conclusions: The stem-first technique with image-free navigated THA could effectively achieve accurate and consistent control of the CA value and thus is expected to improve the surgical outcome.

Background: Major vascular injury is one of the most devastating complications in total hip arthroplasty (THA). Risk for intraoperative vascular injury is increased when the normal vascular anatomy is distorted by previous surgery or dislocation with displacement. Therefore, an appreciation of the vascular anatomy in relation to the anticipated surgical field is critical to avoid this complication during preoperative assessment for a complicated THA., Methods: Preoperative three-dimensional (3D) CT angiography was performed for 24 complicated THAs when altered vascular anatomy around the acetabulum was suspected. When assessing the CT images, the presence of apparent proliferation of vessels close to the original acetabulum as well as a distance of <10 mm from the artery to the acetabulum was deemed a potential risk factor for intraoperative vascular injury. Additionally, the relationships of clinical characteristics and the presence of these risk factors were analyzed to identify the patient population at risk., Results: The incidence of proliferation of collateral vessels was higher in patient groups with proximal femoral migration of 5 cm or more and multiple previous surgeries prior to the index THA. Moreover, in three ankylosed hips, lateral deviation of the main vascular trunk with an artery-acetabulum distance of <10 mm was identified in all cases., Conclusion: Preoperative 3D-CT angiography in cases of complicated THA revealed altered vascular anatomy which may increase the risk for intraoperative vascular injuries. Patient characteristics related to the risk for this complication were marked proximal femoral migration, multiple previous surgeries, and hip ankylosis. Preoperative image examination of the vascular anatomy is thought to help reduce the risk of inadvertent vascular injury in these complicated THA cases.