Search

Background: Paprosky type IIIa and IIIb acetabular defects remain technically challenging during revision hip arthroplasty. Numerous surgical options exist to counter extensive acetabular bone loss with high postoperative complication and revision rates reported. Our aim was to report comprehensive long-term outcomes of our experience with Trabecular Metal (TM) augments for these difficult cases., Methods: 38 patients underwent revision total hip arthroplasty at our institution from 2009 to 2014 where a TM augment was used for acetabular deficiency. Prospective radiographic and Patient-Reported Outcome Measures were recorded and analyzed to a mean of 7.3 years (range: 5.4 to 10.8)., Results: No patient was excluded or lost to follow-up. Complications included 3 intraoperative fractures, 1 early infection requiring washout with implant retention, 1 early revision due to allograft resorption, and 6 patients who required late repeat revision surgery: 3 for late infection, 2 for aseptic loosening with augment fracture or dislocation, and 1 for recurrent dislocation. The estimated mean implant survivorship was 8.99 years. 93.5% of augments remaining were well osseointegrated while 97% of the acetabular shells were osseointegrated. Hip center of rotation was restored by a mean of 14 mm inferiorly without significant medialization. Short Form-12 (SF-12) and Western Ontario and McMaster Universities Arthritis Index (WOMAC) scores were significantly reduced postoperatively to a level comparable to the average individual., Conclusion: This long-term study details our experience of TM augments for the most severe acetabular defects. For such cases, no excellent surgical solution exists; in comparison to alternative methods, we advocate that this technique is reasonably safe and effective., (Copyright © 2020 Elsevier Inc. All rights reserved.)

High-quality and cost-effective health care are highly recommended especially in joint replacement surgeries, particularly in total hip arthroplasty. Therefore, it is indispensable for orthopaedic surgeons to spot the potential areas of quality improvement. Evaluating the efficacy of the different ways of skin closure is an unacknowledged topic. We performed this study following both the Preferred Reporting Items for Systematic Reviews and Meta- analyses Statement (PRISMA) and the Cochrane Handbook for systematic reviews and meta-analysis. Articles were from any country, written in any language. We included all randomised control trials and retrospective cohort studies undergoing primary total hip arthroplasty who either received staples or subcuticular sutures for skin closure. The primary outcome was the incidence of wound infection. Secondary outcomes included length of stay (LOS), time to skin closure, total cost, and patient's satisfaction. We included five studies in our cumulative meta- analysis. We conducted them using Review Manager V.5.0. We computed the risk ratio as a measure of the treatment effect, taking into account heterogeneity. We used Random-effect models. Primary skin closure with subcuticular sutures had insignificant marginal advantages for wound infections, LOS, and wound oozing. On the contrary, staples were more cost- effective and had less time for closure with higher patient's satisfaction. Except for closure time and patient satisfaction , no significant difference between the two groups. The use of staples after THA may have several slight clinical advantages over the subcuticular sutures. However, owing to the complexities associated with wound closure, future clinical and laboratory studies assessing their complication outlines must be examined before an optimum technique can be determined.

Background: We describe the intraoperative parameters that affect stem subsidence rates in tapered modular femoral stems for revision total hip arthroplasty (THA). We also determine the effect of the stem bicortical contact on subsidence rates and whether there is a minimum threshold bicortical contact that must be achieved to avoid the complication of subsidence., Methods: This is a retrospective cohort study consisting of 109 hips in 105 patients (53 males and 52 females) at a minimum of 2 years of follow-up. All revisions were carried out for Paprosky type 3A and 3B femoral deficits. Clinical outcomes included the indication for revision, aseptic re-revision surgery, specifications of the stem inserted, and specifications of the femoral head and acetabular components implanted. Radiographic outcome measures included subsidence (mm) and bicortical contact (mm)., Results: Using multivariate regression analysis, 3 parameters were associated with an increased rate of stem subsidence. A reduced bicortical contact distance (P < .001) and a stem length of ≤155 mm (P < .001) were both associated with higher subsidence rates. We also demonstrated a novel threshold of 20-mm bicortical contact which must be achieved to significantly reduce subsidence rates in these modular femoral stems for revision THA., Conclusion: Subsidence rates of modular tapered femoral stems for revision THA can be significantly reduced by increasing the initial bicortical contact of the stem within the diaphysis and the overall length of the femoral stem >155 mm. We describe a minimum threshold bicortical contact distance of 20 mm that should ideally be exceeded to significantly reduce the risk of stem subsidence within the femoral canal., (Copyright © 2020 Elsevier Inc. All rights reserved.)

The Exeter stem by Stryker has become one of the most successful and widely used stems in modern cemented hip arthroplasty. We present a case of a rare stem fracture which was treated by 'cement-in-cement' revision arthroplasty technique. The patient, an 87-year-old man, presented with left hip pain and an inability to weight bear following a cracking sensation when he was standing to dress himself. The patient denied history of fall or trauma. On examination he was noted to have a shortened externally rotated left lower limb without neurovascular compromise. On pelvic radiograph he was noted to have an incomplete stem fracture of his left-sided total hip replacement. He was treated with a cement-in-cement revision. Postoperatively the stem was sent for analysis in the London Implant Retrieval Centre. This is an example of a rare form of stem fatigue failure treated with a well-described technique in revision arthroplasty., Competing Interests: Competing interests: None declared., (© BMJ Publishing Group Limited 2019. No commercial re-use. See rights and permissions. Published by BMJ.)

Background: Trabecular Metal (TM) augments are one option when reconstructing bone loss during acetabular side revision surgery., Methods: We studied 38 consecutive patients with Paprosky type 3 defects that were revised using a TM shell and one or more augments over a 6-year period. There were 29 Paprosky type 3A defects and 9 Paprosky type 3B defects. The mean age of the patients at the time of surgery was 68.2 years (range 48-84). The mean length of follow-up was 36 months (range 18-74)., Results: The mean preoperative short form 12 health survey improved from 27.7 before operation to 30.1 at the time of final follow-up (P = .001). The mean Western Ontario and McMaster Universities Osteoarthritis Index score improved from 53 preoperatively to a mean of 78.8 at final follow-up (P < .0001). There was evidence of radiographic loosening in 7 of the cup-augment constructs. One patient developed a deep infection requiring re-revision. Two patients required revision for aseptic loosening., Conclusion: The use of TM in complex acetabular reconstruction is associated with good outcome in the short to medium term., (Copyright © 2017. Published by Elsevier Inc.)

The relationship between the tip of the Greater Trochanter (GT) and the centre of the Femoral Head (FH) is commonly used as reference point to align the femoral component during hip arthroplasty. We performed tri-planar computed tomography analysis of the proximal femoral anatomy in a series of 150 patients (n = 150) to accurately delineate this relationship. The mean location for the centre of the FH was 8.64 mm (95% confidence interval, 9.44-7.83) distal to the tip of the GT. The centre of the FH was found to be distal to the tip of the GT in 90.6% of cases. Hence we would suggest caution in using the tip of the GT as a reference point during total hip arthroplasty as it could be associated with an inadvertent intraoperative leg lengthening.

The main mode of failure of the acetabular component in total hip arthroplasty is aseptic loosening. Successive generations of cementation techniques have evolved to alleviate this problem. This paper evaluates one such method, Negative Pressure Intrusion Cementation. Two groups of machined bovine cancellous bone samples were created; experimental (n = 26) and control (n = 26). The experimental group was cemented using the negative pressure technique and the control group was cemented in the absence of negative pressure. The relative cement intrusion depths were then assessed for each group using MicroCT. These samples were then further machined and tested to failure in torsion to estimate their mechanical properties. Results show mean cement intrusion depth for the negative pressure group to be 8,676 microm and 6,042 microm for the control group (p = 0.078). Mechanical testing revealed a greater mean torque in the negative pressure group (1.6223 Nm versus 1.2063 Nm) (p = 0.095). This work quantifies the effect of negative intraosseous pressure on cement intrusion depth in cancellous bone and for the first time relates this to increased mechanical strength.

The aim of this study was to identify the clinical factors associated with the need for peri-operative blood transfusion in non-anaemic patients undergoing hip or knee arthroplasty. We prospectively evaluated 162 consecutive patients who underwent total hip or knee arthroplasty. Analysis was performed to establish the relationship between all independent variables and the need for postoperative transfusion. Univariate analysis revealed a significant relationship between the need for postoperative blood transfusion and the pre-operative haemoglobin levels (P= 0.001), weight (P= 0.019) and age (P= 0.018). Multivariate analysis identified a significant relationship only between the need for transfusion and the pre-operative haemoglobin level (P= 0.0001). The pre-operative haemoglobin level of the patient was the only variable to independently predict the need for blood transfusion after primary hip or knee arthroplasty.