Search

Background: Arsenic, classified as a priority pollutant and human carcinogen by the IARC, is subject to stringent regulatory limits in food and water. Among various arsenic species found in water samples, arsenite (As(III)) is identified as the most toxic form. Given the limitations of conventional spectroscopic techniques in speciation analysis, there is a crucial need for innovative and sustainable methodologies that enable arsenic speciation. Simplifying these methodologies is essential for widespread applicability and effective environmental monitoring., Results: This study proposes a simple and cost-effective analytical methodology for speciating inorganic arsenic in water samples. The method involves extracting As(III) into a polymer inclusion membrane (PIM) containing the extractant Cyanex 301 (bis(2,4,4-trimethylpentyl) dithiophosphinic acid), followed by analysis using energy dispersive X-ray fluorescence (EDXRF) spectrometry. The concentration of arsenate was measured after a reduction step using a thiosulfate/iodide mixture. This simple methodology allows a limit of quantification for trivalent arsenic (2 μg L -1 ), which is well below the World Health Organization's recommended maximum permissible level of As in drinking water (10 μg L -1 ). The method that is developed allows the determination of As at trace levels in waters with naturally occurring arsenic., Significance and Novelty: This study represents a significant advance in the field, providing a novel and efficient methodology for arsenic speciation analysis in water samples. By combining the advantages of polymer inclusion membrane (PIM) extraction with energy dispersive X-ray fluorescence (EDXRF) spectrometry, this study offers a cost-effective and environmentally friendly approach to address the critical issue of arsenic contamination in water sources, thereby contributing to enhanced environmental monitoring and public health protection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Exposure to arsenic (As) through drinking water results in accumulation of As and its methylated metabolites in several organs, promoting adverse health effects, particularly potential development of cancer. Arsenic toxicity is a serious global health concern since over 200 million people are chronically exposed worldwide. Abundant biochemical and epidemiological evidence indicates that the kidney is an important site of uptake and accumulation of As, and mitochondrial damage plays a crucial role in arsenic toxicity. However, non-destructive analyses and in situ images revealing As fate in renal cells and tissue are scarce or almost non-existent. In this work, kidney tissue from exposed rats was analyzed by EDXRF (Energy dispersive X-ray fluorescence), micro-SRXRF (micro X-ray Fluorescence using Synchrotron Radiation), SRTXRF (SRXRF in total reflection condition), SEM-EDX (Scanning Electron Microscope in combination with EDXRF) and SRXRF-XANES (SRXRF in combination with X-ray Absorption Near Edge Spectroscopy). Our results provide evidence of renal cortex distribution of As with periglomerular localization, co-localization of S, Cu and As in subcellular compartment of proximal tubule cells, mono-methylarsonous acid accumulation in renal cortex mitochondria, and altered subcellular concentration and distribution of other elements., (Copyright © 2019. Published by Elsevier Ltd.)

In the present study, we investigated the possibilities and drawbacks of hollow fiber liquid phase microextraction (HF-LPME) combined with total reflection X-ray fluorescence (TXRF) spectrometry for the determination of low amounts of inorganic arsenic (As) species in water samples. The obtained results showed that a three-phase HF-LPME system was more suitable to be used in combination with TXRF than the two phase configuration, since lower detection limit and better precision for As determination can be attained. Relevant experimental parameters affecting As extraction (i.e. types of extractant, organic solvent, agitation speed, pH and extraction time) and TXRF analysis (deposition volume and drying mode) were systematically evaluated. It was found that As(III) was more efficiently extracted at pH 13, whereas, optimum pH for As(V) extraction was at pH 8.5. Limits of detection (LOD) achieved using the best analytical conditions meet the requirements of current legislation and allow the determination of inorganic As(V) and As(III) in water. The proposed method was also applied to different spiked environmental water samples for the preconcentration and subsequent determination of trace inorganic As species. Image 1 • The combination of HF-LPME with TXRF is investigated for the determination of inorganic arsenic species in water. • The proposed methodology allows the selective extraction of arsenite and arsenate through the control of pH of the sample. • Limits of detection achieved allow the determination of As(III) and As(V) in natural waters. [ABSTRACT FROM AUTHOR]

Alumina supported on graphene oxide (Al 2 O 3 /GO) nanocomposite as new nanosorbent in dispersive micro-solid phase extraction (DMSPE) for As(V) and Cr(III) preconcentration is described. The crucial issue of the study is synthesis of novel nanocomposite suitable for sorption of selected species of arsenic and chromium. Al 2 O 3 /GO demonstrates selectivity toward arsenates in the presence of arsenites at pH 5 and chromium(III) ions in the presence of chromate anions at pH 6. The Al 2 O 3 /GO nanocomposite was characterized by scanning electron microscopy (SEM) transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and the Raman spectroscopy. The maximum adsorption capacity calculated based on the Langmuir adsorption model were 43.9 mg g −1 and 53.9 mg g −1 for As(V) and Cr(III), respectively. The nanocomposite was used as solid sorbent in preconcentration of As(V) and Cr(III)_ions from water samples and their determination using energy dispersive X-ray fluorescence spectrometry (EDXRF). The As(V) and Cr(III) ions can be quantitatively preconcentrated from 25 to 100 mL aqueous samples within 5 min using DMSPE procedure and 1 mg of Al 2 O 3 /GO. The nanocomposite was also used for preparation of Al 2 O 3 /GO membrane. Then, As(V) and Cr(III)_ions can be retained under flow condition by passing analyzed solution through Al 2 O 3 /GO membrane. Under the optimized conditions, As(V) and Cr(III) ions can be determined with very good recovery (92–108%), precision (RSD 2.7–4.0%) and excellent limit of detection (0.02 ng mL −1 As and 0.11 ng mL −1 Cr). The accuracy of the method was studied by analyzing certified reference materials (NIST 1640a) and spiked real water samples. [ABSTRACT FROM AUTHOR]