Search

Zirconium-based ferromagnetic sorbent was fabricated by coprecipitation of Fe2+/Fe3+ salts in a zirconium solution and explored as a potential sorbent for removing the Cu2+, Zn2+, and Cd2+ from aqueous solution. The sorbent could easily be separated from aqueous solution under the influence of external magnetic field due to the ferromagnetism property. A trimodal distribution was obtained for the sorbent with average particle size of 22.74 μm. The –OH functional groups played an important role for efficient removal of divalent ions. The surface of the sorbent was rough with abundant protuberance while the existence of divalent ions on the sorbent surface after the sorption process was demonstrated. Decontamination of the heavy metal ions was studied as a function of initial metal ions concentration and solution pH. Uptake of the heavy metal ions showed a pH-dependent profile with maximum sorption at around pH 5. The presence of the ferromagnetic sorbent in solution at different initial pH has shown a buffering effect. Equilibrium isotherms were analyzed using Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models. Adequacy of fit for the isotherm models based on evaluation of R2 and ARE has revealed that heavy metal ions decontamination was fitted well with the Freundlich model. [ABSTRACT FROM AUTHOR]

In this study, banana fibers extracted from banana leaves, stem, and stalk were used to remove acid green dye from aqueous solution. Three initial concentrations (750, 1000, and 1500 ppm) were chosen to determine the kinetic characteristics of the banana fiber sorbents at 25°C, agitation speed of 200 rpm, and total contact time of 3 hours. The pseudo-first-order, pseudo-second-order, and Dunwald-Wagner kinetic models were applied to the experimental kinetic data. For isotherm study, the batch experiments were performed at 25°C, initial pH 2, agitation speed of 200 rpm, and initial concentrations between 100 and 2000 ppm. The experimental data was fitted to the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherms. The equilibrium was achieved in less than 90 minutes. The removal of the acid green dye was found to be following closely the pseudo-second-order kinetic model. For equilibrium study, the Freundlich isotherm was found to fit well with adsorption of acid green dye on the banana leaves, stem, and stalk sorbents. The calculated mean free energy of 4–11 J/mol indicated that the sorption process was mostly physical in nature. Experimental results also showed the adsorption performance is greatly affected by the initial solution pH. [ABSTRACT FROM AUTHOR]