Search

Although apodization patterns have been adopted for the analysis of sputtering sources, the analytical solutions for the film thickness equations are yet limited to only simple conditions. Empirical formulations for thin film sputtering lacking the flexibility in dealing with multi-substrate conditions, a suitable cost-effective procedure is required to estimate the film thickness distribution. This study reports a cross-discipline simulation program, which is based on discrete particle Monte-Carlo methods and has been successfully applied to a non-imaging design to solve problems associated with sputtering uniformity. Robustness of the present method is first proved by comparing it with a typical analytical solution. Further, this report also investigates the overall all effects cause by the sizes of the deposited substrate, such that the determination of the distance between the target surface and the apodization index can be complete. This verifies the capability of the proposed method for solving the sputtering film thickness problems. The benefit is that an optical thin film engineer can, using the same optical software, design a specific optical component and consider the possible coating qualities with thickness tolerance, during the design stage.

Simulation of the immersed light source with microstructure on the emitting surface is critical for next generation optical and bio-photonics components. Several design procedures that corresponding to the modulation of the emitting pattern is addressed. The writers are at present operating on a MOST project "Investigation of Solid Human Eye Model with 3D Printing Technology and the Evaluation on the Associate Specialized Optoelectronic Sensing Structures Fabrication to the Biocompatible Surface". We are preparing the methodology that can construct the human eye model with immersed emitting energy by the 3D printing material, and furnishes the real time estimation on the image qualities of the human eye. Our aim is to build a practical platform to evaluate the immersed optical-electronic components of the human eye. By doing this, the evaluation of the visual qualities can be amended, and it becomes possible for us to fill in an accurate measurement system that based on the eye model with immersed source. In this account, we provide several comments on the conduct of the immersed light source and the application to the details human eye modeling.

We report an intuitive approach to simulating the performance of the phosphor-based light emitting diode (LED) by using the two-light-sources model for an optimized LED lens. The optimized secondary lens shape is achieved by approaching a uniform energy distribution on the detecting plane. Both the spectrum and spatial apodization of the LED structure are discussed, and the results indicate that the two-light-sources model can solve the misleading design on the phosphor-based LED due to imperfect color mixing of light source, that one can satisfy the highly uniformity requirement for specific applications, such as display backlight or optogenetic.