Search

Objectives: Oral prosthetic rehabilitation has been used for a long time to restore function and natural appearance; however, it is still one of the most challenging areas in dentistry due to its technical fabrication process and biological behavior. Considering the advantages of additive manufacturing technology, this study introduced the feasibility of developing a 3D printed resin-based composition modified with graphene nanoplatelets (GNPs) to improve properties., Methods: Acrylate-based resin was impregnated with different concentrations of GNPs (0.0-0.25 wt%), and then different aspects such as mechanical, physical, biological and antimicrobial were analyzed to evaluate the effectiveness. TEM and SEM were used to characterize GNPs and their existence within the resin. Surface topography and roughness were evaluated using AFM. The degree of conversion and composition were confirmed by FTIR. Mechanical properties were detected using bending strength, microhardness and nanoindentation. Biocompatibility and antimicrobial activities were assessed with oral fibroblast and Candida albicans (C. albicans), respectively. In addition, most of the measurements were performed repeatedly after 3 months of storage in artificial saliva to evaluate performance., Results: GNPs improved strength significantly at low concentrations ≤ 0.05 wt%, while the addition up to 0.25 wt% enhanced printed nanocomposite hardness and elasticity. The modification did not induce a toxic response, as its biocompatibility was within the recommended range of biomedical devices. Antimicrobial activity was of prominence, as GNPs showed an outstanding route of reducing C. albicans activity associated with filler proportion., Significance: The embedment of GNPs in 3D printed resin can become a key material for customized applications that require high antimicrobial, stiffness and strength properties., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The aim of this study is to develop a novel 3D printed denture base resin material modified with mesoporous silica nanocarrier loaded with silver (Ag/MSN) to enhance mechanical and antimicrobial properties. Acrylate resin-based was incorporated with various proportion of Ag/MSN (0.0-2.0 wt%). Specimens with different geometry were printed and characterized accordingly for the effect of modification on properties such as: mechanical and physical properties, chemical composition and degree of conversion, as well as biological response in term of biocompatibility and antimicrobial against oral fibroblast and candida biofilm (C. albicans), respectively. The consecutive addition of Ag/MSN improved significantly surface hardness and crack propagation resistance, while flexural strength remained similar to control; however, a negligible decrease was observed with higher concentrations ≥1 wt%. No significant difference was noticed with water sorption, while water solubility had a remarkable trend of reduction associated with filler content. The surface roughness significantly increased when concentration of Ag/MSN was ≥1.0 wt%. A significant reduction in C. albicans biofilm mass, as the inhibition proficiency was correlated with the proportion of the filler. With respect to the amount of Ag/MSN, the modification was compatible toward fibroblast cells. The sequential addition of Ag/MSN enhanced significantly the mechanical and antimicrobial properties of the 3D printed resin-based material without affecting adversely compatibility. The acrylic resin denture base material has susceptibility of microbial adhesion which limits its application. Silver loaded MSN showed a significant performance to enhance antimicrobial activity against C. albicans which is the main cause of denture stomatitis. The proposed invention is a promise technique for clinical application to provide an advanced prosthesis fabrication and serve as long-term drug delivery., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Objective: The aim of this study was to investigate the potential antimicrobial and cytotoxic effect of modified 3D printed resin with ZrO 2 nanoparticles, as long-term provisional restoration. In addition, the study involved artificial aging process for three months to observe stability of 3D printed resin., Methods: Functionalized ZrO 2 nanoparticles with γ-MPS were characterized using transmission electron microscopy, scanning electron microscope and Fourier-transform infrared spectroscopy. Dental resin was incrementally impregnated with γ-MPS modified nanoparticles at different concentrations (0, 1, 3, and 5 wt%). Specimens were printed, post-cured and placed in artificial saliva at 37  o C for 48 h or aged for 3 months. Discrepancy in composition and roughness were monitored using FTIR and AFM, respectively. Biocompatibility was evaluated using human oral fibroblasts. Antimicrobials capacity and biofilm adhesion were measured with Streptococcus mutans and Candida albicans., Results: The microscopic and spectroscopic analyses confirmed γ-MPS coating around ZrO 2 nanoparticles. The addition of nanoparticles (>1 wt%) significantly increased the surface roughness. Cytotoxicity results were in agreement with the recommended range of oral biomaterials standard. Moreover, the antimicrobial activity significantly improved with increasing the filler concentration. Despite the decrease in antimicrobial efficacy after 3 months of aging, modified resin revealed a critical ability to dominate biofilm formation., Significance: The addition of ZrO 2 nanoparticles showed significant antimicrobial capability of a 3D printed resin without inducing any cellular side effects. Thus, the modification of a 3D printed resin with ZrO 2 nanoparticles has a promising future in the dental field for fabricating long-term provisional restorations., (Copyright © 2022 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)