Search

Antenna chambers are RF‐shielded enclosures which are required for antenna and radio performance measurements. Typically, anechoic chambers (ACs) are used for measuring directional metrics (e.g. antenna pattern, effective isotropic power etc.), while reverberation chambers (RCs) are widely used for non‐directional measurements (e.g. antenna efficiency, total radiated power etc.). When a device under test requires both types of measurements, testing needs to be conducted sequentially in an AC and an RC. This leads to significant time inefficiencies due to the need to set up and calibrate two separate measurement setups in two different chambers. To address these issues, this letter proposes a programmable chamber framework capable of electronically switching between AC and RC modes by programming the reflective intelligent surface‐enabled sidewalls. This framework is highly attractive for the industry as it supports both directional and non‐directional measurements within a single chamber. The letter outlines the conceptual framework, discusses design considerations, and presents preliminary experimental validation of reflective intelligent surface‐enabled sidewall with the designed phase‐setting configurations to emulate the radio absorber sidewall of an AC and the metal plate sidewall of an RC. The experimental results demonstrate the effectiveness and potential of the proposed approach. [ABSTRACT FROM AUTHOR]

In this research, we present an innovative method for estimating the beams of array antennas. Traditional beam analysis methods rely on placing receiving antennas in the far-field region, which requires moving or rotating the Tx or Rx, and using radiation pattern measurements. However, such methods often demand vast spatial requirements and the use of high-cost network analyzers. In contrast, the technique proposed in this study utilizes a board patterned with coupling lines strategically placed in the antenna's near-field zone. Signals intercepted by these coupling lines undergo conversion into DC voltage via a power detector situated at the line terminus. Interestingly, this method enables beam estimation solely based on the DC voltage level output of the power detector, thus offering a cost-effective and space-efficient solution that represents a significant advancement from traditional beam estimation methods. [ABSTRACT FROM AUTHOR]

Automotive antennas are gaining importance due to their increasingly important role for autonomous driving with the development of the Internet of Vehicles. However, over‐the‐air testing on automotive antennas is difficult owing to its large volume and complex body structure. Plane wave generators can approximate uniform plane waves in the near field of the device under test, which can greatly reduce the measurement distance and thereby decreasing the cost compared with direct far‐field solutions. This letter designs three plane wave generators for three quiet zone sizes selected according to the vehicle structure at 5.9 GHz, achieving quiet zone sizes of 1.45 m ×0.23$\times 0.23$ m, 2.9m ×0.56$\times 0.56$ m, and 3.9 m ×1.27$\times 1.27$ m, respectively. Within the three quiet zones, amplitude deviations of 0.82, 0.34, and 0.34 dB and phase deviations of 9.4∘${9.4^\circ }$, 6.72∘${6.72^\circ }$ and 1.42∘${1.42^\circ }$ are realized, respectively, according to the numerical simulations. Uncertainty analysis is further implemented to investigate the robustness of the designed PWGs proposed in this letter. [ABSTRACT FROM AUTHOR]

This paper presents the description of antenna parameters related to its radiation/reception capabilities influenced by the plasma parameters in the environment surrounding the antenna, complementing the existing works on the antenna parameters (e.g., the impedance or currents). The parameters considered are the radiation zones' radiuses (inductive, Fresnel, Fraunhofer), scalloping and directivity; a method of transformation of the air/vacuum-measured radiation/reception pattern to the pattern expected for given plasmatic conditions is also considered. Three different simplified plasma conditions are taken into account (different electron densities: 1.4 × 1012 m−3, 4 × 1011 m−3 and 108 m−3), with varying antenna length (1 m, 10 m, 100 m) and signal propagation mode (classic-ionospheric, whistler and Alfvén). The findings show that the presented antenna parameters and its radiation/reception pattern are heavily dependent on the plasma conditions. These findings can be used to form additional requirements and constraints for the mechanical design of new instrumentation for space weather measurements on board spacecraft (e.g., moving the antennas away from the spacecraft in order not to alter their radiation/reception patterns or not to measure the plasma around the spacecraft) or more accurate data processing from existing space weather satellites, allowing, for example, a more precise triangulation of the signal source or its spectral power regarding the actual performance of the antennas submerged in plasma. [ABSTRACT FROM AUTHOR]

The integration of directive elements into a circular switched parasitic array at 868 MHz is presented. The typical usage of reflective parasitic monopoles is supplemented with additional, shorter monopole elements which are positioned closer to the central active monopole to induce directive behaviour. This allows for more degrees of freedom with the steering of the antennas beam and to increase the gain of the antenna. This leads to a greater flexibility of the system and enables power reduction of the amplifiers for enhanced battery life time. The design and configuration of a circular switched parasitic array with directive elements is shown and a prototype is built for validation. [ABSTRACT FROM AUTHOR]

Ever‐increasing bandwidth requirements from various industries drive the need for the ever‐increasing bandwidth of antennas used for testing. Broadband Double‐Ridged Guide Horn (DRGH) antennas are used extensively in antenna measurement and ElectroMagnetic Compatibility/Interference (EMC/I) testing. The current state‐of‐the‐art broadband DRGH antennas reported in the literature for use in measurement applications cover bandwidth ratios as large as 36:1 (0.5–18 GHz). This paper presents the design and realisation of a DRGH antenna with a 100:1 bandwidth ratio (0.5–50 GHz). To achieve such a wide bandwidth, the ridge gap, width and feed were optimised, and a novel coaxial‐to‐ridge waveguide launcher section based on a typical Vivaldi antenna was developed. Backward radiation was reduced using an absorber‐filled cavity. A prototype DRGH antenna was manufactured using additive manufacturing, also referred to as 3D printing. Simulated and measured results obtained in an anechoic chamber are presented. [ABSTRACT FROM AUTHOR]

Since the total number of the antenna elements can be up to hundreds in a massive multiple‐input multiple‐output (MIMO) system, subarray‐structured base station (BS) array configurations are widely adopted to achieve a good cell coverage and to reduce the required number of radio frequency chains at the same time. It is crucial for any BS product to ensure that the antenna elements perform correctly as expected. Therefore, the necessity of array diagnosis is evident, especially for large BS arrays. Furthermore, it is essential that the diagnosis can be achieved in a compact and cost‐effective setup with high measurement efficiency (i.e. only a few measurement samples are required). The principle of the diagnosis method presented in this article is to obtain the S‐parameters between the subarrays and the probe via solving linear equations. In the simulation, a BS array composed of 16 subarrays with each containing 3 elements is used to validate the diagnosis method at 3.5 GHz. An array composed of 4 subarrays with each containing 3 elements was used in the measurements to verify the diagnosis method with two different phase tuning matrices at 3 GHz. Successful diagnosis results have been achieved in both the simulations and the measurements. [ABSTRACT FROM AUTHOR]

With the popularity of 5 G, there is an increasing request for a light, high-performance, and stable structure for wireless communication. To solve the problems of delamination cracking and its own heavy weight of the conventional microstrip antenna, this study used ultra-high molecular weight polyethylene (UHMWPE) filament tows and purple copper filament tows as raw materials to prepare 3D woven hollow structure microstrip antenna preforms on a common loom. Using the prepared preforms for reinforcement and resin as the matrix, the VARTM process was used to prepare a 3D woven hollow structure microstrip antenna with a height of 6.8 mm, a weight of 35 g, and a bulk density of 0.7 g/cm3. The combination of the electromagnetic performance test and HFSS software simulation shows that the antenna has excellent radiation performance with a gain of 7.5 dB and a measured VSWR of 1.25. The mechanical performance test results show that it can withstand a maximum compression load of 2982 N and a maximum bending load of 364 N with no obvious delamination at the fracture. It is light, thin, and load-bearing with excellent radiation performance. There will be great potential in the unmanned field and the space field in the future. [ABSTRACT FROM AUTHOR]

An effective, probe‐compensated, phaseless Near‐Field‐Far‐Field (NF–FF) transformation technique with planar spiral scanning is presented. The phase retrieval problem is solved by a quadratic inverse process, whose data are the voltage squared amplitudes of the NF samples acquired on two scanning surfaces. The available information on the antenna under test and on the scanning geometry are used to provide efficient representations for both the unknowns and the data, thus improving the accuracy and reliability of the technique. Furthermore, disconnected apertures are dealt with by adopting two different sets of prolate spheroidal wave functions to represent the aperture fields. Experimental results are reported to assess the effectiveness of the proposed approach. A drastic reduction (about 90%) of the required NF samples, as compared to standard λ/4 measurements (λ being the wavelength), is observed. Aggregating the measurements on the two scanning surfaces, the technique uses less samples even when compared to the case of complex, λ/2 measurements performed on a single surface. Our approach exhibits an accuracy comparable to that achieved when adopting complex measurements with non‐redundant sampling or classical, λ/2 plane‐rectangular NF–FF transformations. [ABSTRACT FROM AUTHOR]

Ultra-wideband (UWB) technology has emerged as a promising solution for high-speed wireless communication, precise positioning, and radar imaging applications. UWB printed rectangular-based monopole antennas offer compactness, simplicity, and versatility, making them well-suited for integration into various wireless devices and systems. This comprehensive review delves into the principles, design methodologies, fabrication techniques, applications, and future directions of UWB printed rectangular-based monopole antennas, highlighting their transformative potential in advancing wireless communication and sensing technologies. [ABSTRACT FROM AUTHOR]

Helical antennas are a versatile class of antennas characterized by their spiral-shaped geometry, which enables them to exhibit unique radiation patterns, polarization properties, and frequency characteristics. This comprehensive review explores the design principles, theoretical foundations, and practical applications of helical antennas across various domains, including wireless communication, radar systems, satellite communication, and radio astronomy. By examining the intricacies of helical antenna design, this review aims to elucidate the significance of helical antennas in modern antenna engineering and their implications for advancing wireless communication, sensing, and imaging technologies. [ABSTRACT FROM AUTHOR]

With the popularity of 5 G, there is an increasing request for a light, high-performance, and stable structure for wireless communication. To solve the problems of delamination cracking and its own heavy weight of the conventional microstrip antenna, this study used ultra-high molecular weight polyethylene (UHMWPE) filament tows and purple copper filament tows as raw materials to prepare 3D woven hollow structure microstrip antenna preforms on a common loom. Using the prepared preforms for reinforcement and resin as the matrix, the VARTM process was used to prepare a 3D woven hollow structure microstrip antenna with a height of 6.8 mm, a weight of 35 g, and a bulk density of 0.7 g/cm³. The combination of the electromagnetic performance test and HFSS software simulation shows that the antenna has excellent radiation performance with a gain of 7.5 dB and a measured VSWR of 1.25. The mechanical performance test results show that it can withstand a maximum compression load of 2982 N and a maximum bending load of 364 N with no obvious delamination at the fracture. It is light, thin, and load-bearing with excellent radiation performance. There will be great potential in the unmanned field and the space field in the future. [ABSTRACT FROM AUTHOR]

This investigation primarily promotes a ultra-high frequency radiofrequency identification (RFID) tag antenna for complex environment applications of smart card in free space and near body scenarios. It also considers other high dielectric materials such as water and metallic objects. A dual dipole antenna with T-match structure is chosen due to the advantage of providing high resilience towards change in impedance of high dielectrics, and to ensure the reception of maximum signals at the blind spots of the antenna. The proposed geometry facilitates placement of other off-the-shelf high and low-frequency antennas on the card, enabling more features, higher performance, and minimum field interaction between different frequencies. A presented RLC equivalent circuit model estimates the impact of body layers on antenna impedance. A high read range of 7.7 m in free space, 5.2 m near body and 2.8 m at the blind spots is obtained. The novelty is shown by testing the antenna near metals and water, achieving high read range without any design modifications. The proposed tag aims to provide new RFID applications that demand small size, less volume, low cost and multifunctionality over various constraints while showing good agreement with sensitivity, impedance matching and the read range. [ABSTRACT FROM AUTHOR]

The classic method of testing array antenna is measuring the beam pattern separately, which suffers from low efficiency. In this study, a fast measurement method used for received array antenna has been present. Firstly, the patterns of element antennas have been tested using multi-channel receiver. Then the entire pattern could be computed by weighting the information of elements. The information contains amplitude and phase, which could be obtained by theory or measurement. [ABSTRACT FROM AUTHOR]

A comparison between different modern heuristic optimization methods applied to antenna far-field radiation pattern reconstruction from planar near-field data is presented in this paper. The antenna under test is represented by means of equivalent magnetic currents (EMC) whose components are optimized using several heuristic algorithms such as simulated annealing (SA), genetic algorithms (GA), and particle swarm optimization (PSO), as well as a traditional local optimization method, the Nelder Mead downhill simplex algorithm. Several schemes for GA (classical real-valued and binary encoding, and their hybrid versions) and PSO (global or local topologies with synchronous or asynchronous updates of the swarm) have been considered in the analysis and the pros and cons of each one are reported and discussed. A study of the performance and limitations of each algorithm using as a canonical problem a small size antenna aperture, along with results of near-field to far-field (NF-FF) transformation are also included [ABSTRACT FROM PUBLISHER]

With the proliferation of wireless devices in recent years, there is a growing need to test the operation and functionality of these various devices in different multipath environments, ranging from line-of-sight environment to a pure Rayleigh environment. In this paper we discuss how a reverberation chamber can be used to simulate a controllable Rician radio environment for the testing of a wireless device. We show that by varying the characteristics of the reverberation chamber and/or the antenna configurations in the chamber, any desired Rician K-factor can be obtained. Expressions for the desired K-factor as a function of the chamber and antenna characteristics will be presented. Experimental results are presented to illustrate the validity of these expressions, to show how the reverberation chamber can be used to simulate different multipath environments, and to show the realization of a controlled K-factor test facility. We present both a one-antenna and a two-antenna test configuration approach [ABSTRACT FROM PUBLISHER]

By supporting an L-probe coupled circular patch antenna with four metallic posts at appropriate locations, it is demonstrated that the conical and the broadside modes which are excited separately by two different sets of L-shaped probes, can be operated at the same frequency range. For a tested antenna operated at 1.85 GHz, the bandwidth (SWR<2) achieved is 24%, and the isolation between the two input ports is 28 dB. The gains of the conical and broadside modes are 4 and 8.5 dBi, respectively. With suitable switching feed networks, the antenna can be reconfigurable in radiation pattern. The antenna can also be used as a pattern diversity antenna for modern mobile communications. [ABSTRACT FROM PUBLISHER]

A tunable, electrically small, wire antenna is developed for HF/VHF ground wave transmission. A variable capacitor is serially connected to tune the resonant frequency of the antenna. The optimal position for the placement of the capacitor is evaluated by numerical simulation. The tuning range and sensitivity are also investigated. A prototype antenna is built and tested, and the measured tuning performance is compared to the simulation results. Transmission loss tests are carried out in several nonline-of-sight environments. The measured transmission loss of the tunable small antenna is found to be within 1 to 2 dB of that of a commercial whip across the tested frequency range. [ABSTRACT FROM PUBLISHER]

A non-perturbing, fast, low-cost probe for near-field measurements is presented in this paper. The new sensing technique's capabilities in antenna fault diagnosis and direct measurement of field intensity distribution at subwavelength distance from the sources are demonstrated by test measurement on different microwave antennas and applicators. © 2003 Wiley Periodicals, Inc. Microwave Opt Technol Lett 38: 95–98, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.10981 [ABSTRACT FROM AUTHOR]

In this paper the problem of sampling the field radiated by a planar source observed over a finite planar aperture located in the near-field is addressed. The problem is cast as the determination of the spatial measurement positions which allow us to discretize the radiation problem so that the singular values of the radiation operator are well-approximated. More in detail, thanks to a suitably warping transformation of the observation variables, the kernel function of the relevant operator is approximated by a band-limited function and hence the sampling theorem applied to achieved discretization. It results in the sampling points having to be non-linearity arranged across the measurement aperture and their number can be considerably lowered as compared to more standard sampling approach. It is shown that the proposed sampling scheme works well for measurement apertures that are not too large as compared to the source's size. As a consequence, the method appears better suited for broad-side large antenna whose radiated field is mainly concentrated in front of the antenna. A numerical analysis is included to check the theoretical findings and to study the trade-off between the field accuracy representation (over the measurement aperture) and the truncation error in the estimated far-field radiation pattern. [ABSTRACT FROM AUTHOR]

In this paper, we describe the design of an electrically large anechoic chamber for usage on millimetre-wave bands. Ansys Savant sotware was used to perform a simulation of the chamber, using physical optics coupled with uniform theory of diffraction (PO/UTD). Moreover, a method based on an open waveguide probe is described in this paper to obtain the electrical properties of the RF absorbers at millimetre-wave frequencies. Two different source antennas were simulated in this work and the corresponding quiet zones predicted. The largest quiet zone was 30 m m × 30 m m × 50 m m , for a chamber size of 1.2 m m × 0.6 m m × 0.6 m . [ABSTRACT FROM AUTHOR]