Search

This study presents a compact circularly polarised array using tapered slot antenna fed by a substrate integrated waveguide (SIW) power divider. With the proposed topology, broadband circularly polarised property is achieved and total gain can be increased by controlling the element length, conserving the same footprint area. The different 2 × 2 cell configurations are investigated. Simple and integrated series-parallel SIW feed for the choose cell is presented. A 2 × 2 antenna array is designed and fabricated using SIW E-plane power divider. The measured 10 dB return loss and 3 dB axial ratio bandwidths are 35.65 and 32.3%, respectively. The measured antenna gain is 14.4 dBi at 35 GHz. [ABSTRACT FROM AUTHOR]

A class of three-dimensional planar arrays in substrate integrated waveguide (SIW) technology is proposed, designed and demonstrated with 8 \times 16 elements at 35 GHz for millimeter-wave imaging radar system applications. Endfire element is generally chosen to ensure initial high gain and broadband characteristics for the array. Fermi-TSA (tapered slot antenna) structure is used as element to reduce the beamwidth. Corrugation is introduced to reduce the resulting antenna physical width without degradation of performance. The achieved measured gain in our demonstration is about 18.4 dBi. A taper shaped air gap in the center is created to reduce the coupling between two adjacent elements. An SIW H-to-E-plane vertical interconnect is proposed in this three-dimensional architecture and optimized to connect eight 1 \times 16 planar array sheets to the 1 \times 8 final network. The overall architecture is exclusively fabricated by the conventional PCB process. Thus, the developed SIW feeder leads to a significant reduction in both weight and cost, compared to the metallic waveguide-based counterpart. A complete antenna structure is designed and fabricated. The planar array ensures a gain of 27 dBi with low SLL of 26 dB and beamwidth as narrow as 5.15 degrees in the E-plane and 6.20 degrees in the 45^\circ-plane. [ABSTRACT FROM PUBLISHER]

This paper presents and demonstrates a class of 3-D integration platforms of substrate-integrated waveguide (SIW). The proposed right angle E-plane corner based on SIW technology enables the implementation of various 3-D architectures of planar circuits with the printed circuit board and other similar processes. This design scheme brings up attractive advantages in terms of cost, flexibility, and integration. Two circuit prototypes with both 0- and 45^\circ vertical rotated arms are demonstrated. The straight version of the prototypes shows 0.5 dB of insertion loss from 30 to 40 GHz, while the rotated version gives 0.7 dB over the same frequency range. With this H-to-E-plane interconnect, a T-junction is studied and designed. Simulated results show 20-dB return loss over 19.25% of bandwidth. Measured results suggest an excellent performance within the experimental frequency range of 32–37.4 GHz, with 10-dB return loss and less than \pm4^\circ phase imbalance. An optimized wideband magic-T structure is demonstrated and fabricated. Both simulated and measured results show a very promising performance with very good isolation and power equality. With two 45^\circ vertical rotated arm bends, two antennas are used to build up a dual polarization system. An isolation of 20 dB is shown over 32–40 GHz and the radiation patterns of the antenna are also given. [ABSTRACT FROM PUBLISHER]

There are many applications such as local positioning systems (LPS) and wireless sensor networks that require high-directivity and compact-size or small footprint antennas. The classical Yagi-Uda antenna may be useful in meeting such demands, which however, becomes very large in size to achieve a high-gain performance due to a large number of directors as well as space required between those elements. In this paper, high-gain yet compact stacked multilayered Yagi antennas are proposed and demonstrated at 5.8 GHz for LPS applications. This structure makes use of vertically stacked Yagi-like parasitic director elements that allow easily obtaining a simulated gain of 12 dB. Two different antenna configurations are presented, one based on dipole geometry for single polarization, and the other on a circular patch to achieve dual polarization. The characteristics of these antennas with respect to various geometrical parameters are studied in order to obtain the desired performance. Measured results of the fabricated antenna prototypes are in good agreement with simulated results. The measured dipole Yagi antenna yields 11 dB gain over 14% bandwidth with a size of 80 × 80 × 29 mm3. Radiation patterns of the dual-polarized Yagi antenna are nearly identical to those of the single-polarized antenna, which has a size of 50 × 50 × 60 mm3, and also its two-port isolation is found to be as low as 25 dB over 4% bandwidth. The proposed antennas present an excellent candidate for compact and low-cost microwave and millimeter-wave integrated systems that require fixed or variable polarization capabilities and small surface footprint. [ABSTRACT FROM AUTHOR]

The detuning owing to the complex in-body operating scenarios, environmental factors, and circuitry of the implantable medical devices (IMDs) are the primary concerns in integrating implantable antennas with their corresponding systems. The wide bandwidth achievement for avoiding the detuning challenges is constrained by device specifications and antenna miniaturization. This study presents an ultra-miniaturized antenna of only 10.66 mm3 volume with an ultra-wide bandwidth of 3040 MHz (0.79–3.83 GHz) for a leadless pacemaker (LP). The proposed antenna encompasses the five important bands: ISM (868–868.6 MHz, 902–928 MHz, and 2.4–2.48 GHz), Wireless Medical Telemetry Service (WMTS) (1395–1400 MHz), and the midfield (1.45–1.6 GHz) bands. To consider a practical operating scenario, the antenna was integrated with a battery and controlling electronics of an LP. In a homogeneous heart phantom (HHP), the proposed antenna showed a higher gain of −28.7, −20.02, and −16.7 dBi at 915 MHz, 1.4 GHz, and 2.45 GHz, respectively. The specific absorption rate (SAR) evaluation in the heart of a realistic model guaranteed patient safety by satisfying the IEEE C95.1-2005 and C95.1-1999 guidelines. The antenna is experimentally validated through measurements in minced pork. The strength of the received signal in the measurements confirms a stable biotelemetric link of the proposed ultra-wideband (UWB) antenna with an external monitoring system. The results obtained through simulations and in vitro testing emphasized that the proposed ultra-miniaturized and UWB antenna could operate more efficiently in the heart, thus establishing itself as a suitable candidate for the LPs. [ABSTRACT FROM AUTHOR]

The ever-growing expectation for high data rates has led to the introduction of multiple-input multiple-output (MIMO) technologies to wireless connectivity. Such a system requires an MIMO antenna with high isolation. At the same time, the MIMO dimension should not be compromised for achieving high isolation. Thus, isolation techniques that do not allow an increase in dimension need to be fostered for MIMO antenna design. In this paper, a novel low-profile, miniaturized MIMO antenna with high isolation was developed considering a split ring resonator (SRR)-based bandstop filter as a decoupling network. The bandstop filter was designed with a unit cell split ring resonator structure and was deployed between two closely spaced monopole MIMO antenna elements to obtain isolation as high as 39.25 dB at 2.61 GHz. Two open-circuit stub lines were attached with the MIMO feeding network to achieve good impedance matching at resonance frequency. The proposed antenna exhibited a peak gain of 3.8 dBi and radiation efficiency of 84%. It had a low envelop correlation coefficient (ECC < 0.12), high diversity gain (DG > 9.95 dB), low mean effective gain ratio (MEG 1/MEG 2 < 0.05 dB), and low channel capacity loss (CCL < 0.042 bits/s/Hz) at resonance frequency. The overall antenna dimension was restricted to 44   mm   × 22   mm   (0.38   λ 0 × 0.19   λ 0) for its easy integration in compact wireless devices. [ABSTRACT FROM AUTHOR]