Search

A class of three-dimensional planar arrays in substrate integrated waveguide (SIW) technology is proposed, designed and demonstrated with 8 \times 16 elements at 35 GHz for millimeter-wave imaging radar system applications. Endfire element is generally chosen to ensure initial high gain and broadband characteristics for the array. Fermi-TSA (tapered slot antenna) structure is used as element to reduce the beamwidth. Corrugation is introduced to reduce the resulting antenna physical width without degradation of performance. The achieved measured gain in our demonstration is about 18.4 dBi. A taper shaped air gap in the center is created to reduce the coupling between two adjacent elements. An SIW H-to-E-plane vertical interconnect is proposed in this three-dimensional architecture and optimized to connect eight 1 \times 16 planar array sheets to the 1 \times 8 final network. The overall architecture is exclusively fabricated by the conventional PCB process. Thus, the developed SIW feeder leads to a significant reduction in both weight and cost, compared to the metallic waveguide-based counterpart. A complete antenna structure is designed and fabricated. The planar array ensures a gain of 27 dBi with low SLL of 26 dB and beamwidth as narrow as 5.15 degrees in the E-plane and 6.20 degrees in the 45^\circ-plane. [ABSTRACT FROM PUBLISHER]

This paper presents and demonstrates a class of 3-D integration platforms of substrate-integrated waveguide (SIW). The proposed right angle E-plane corner based on SIW technology enables the implementation of various 3-D architectures of planar circuits with the printed circuit board and other similar processes. This design scheme brings up attractive advantages in terms of cost, flexibility, and integration. Two circuit prototypes with both 0- and 45^\circ vertical rotated arms are demonstrated. The straight version of the prototypes shows 0.5 dB of insertion loss from 30 to 40 GHz, while the rotated version gives 0.7 dB over the same frequency range. With this H-to-E-plane interconnect, a T-junction is studied and designed. Simulated results show 20-dB return loss over 19.25% of bandwidth. Measured results suggest an excellent performance within the experimental frequency range of 32–37.4 GHz, with 10-dB return loss and less than \pm4^\circ phase imbalance. An optimized wideband magic-T structure is demonstrated and fabricated. Both simulated and measured results show a very promising performance with very good isolation and power equality. With two 45^\circ vertical rotated arm bends, two antennas are used to build up a dual polarization system. An isolation of 20 dB is shown over 32–40 GHz and the radiation patterns of the antenna are also given. [ABSTRACT FROM PUBLISHER]

Significant advances in the development of millimeter-wave and terahertz (30–10 000 GHz) technologies have been made to cope with the increasing interest in this still not fully explored electromagnetic spectrum. The nature of electromagnetic waves over this frequency range is well suited for the development of high-resolution imaging applications, molecular-sensitive spectroscopic devices, and ultrabroadband wireless communications. In this paper, millimeter-wave and terahertz antenna technologies are overviewed including the conventional and nonconventional planar/nonplanar antenna structures based on different platforms. As a promising technological platform, substrate-integrated circuits (SICs) attract more and more attention. Various substrate-integrated waveguide (SIW) schemes and other synthesized guide techniques have been widely employed in the design of antennas and arrays. Different types of substrate-integrated antennas and beamforming networks are discussed with respect to theoretical and experimental results in connection with electrical and mechanical performances. [ABSTRACT FROM PUBLISHER]

The growing complexity of satellite and mobile communication systems means that there are increasing needs for antenna arrays with multiple-beam capability. Conventional beamforming-network (BFN) configurations can be realized by different types of transmission lines, such as a microstrip line or waveguide. However, each of these has its own obvious defects. As part of a new generation of high-frequency integrated circuits, called substrate integrated circuits (SICs), substrate-integrated-waveguide (SIW) technology combines the benefits of both planar transmission-line and non-planar-waveguide technologies. It presents an excellent solution for the design and implementation of high-frequency beamforming networks, including for use at millimeter wavelengths. This paper overviews the state-of-the-art of substrate-integrated-waveguide techniques in the design and realization of innovative beamforming networks, and multibeam antenna arrays for low-cost satellite and mobile systems. Different classes of substrate-integrated-waveguide-based structures are theoretically and experimentally studied and demonstrated, to offer unprecedented performance and opportunities for specific space-and ground-based applications. [ABSTRACT FROM PUBLISHER]