Search

To satisfy the requirement of the sub-6 GHz bands coverage and the 4 × 4 multiple-input--multiple-output (MIMO) specification for fifth-generation (5G) era, a dual-band four-antenna module covering partial 5G bands N78 (3.4–3.6 GHz) and N79 (4.8–4.9 GHz) is proposed for 5G terminal applications. Based on a quarter-circle-shaped dual-mode slotted planar inverted-F antenna (PIFA), the two target bands are covered by the fundamental TM11 mode and a hybrid higher-order mode combined by quasi-TM11 and quasi-TM0,1/2 modes. The four-antenna module is composed of four such PIFA elements that are arranged in a sequentially rotated layout. It presents a circular shape with a diameter of 39.4 mm and is with a low profile of 1.2 mm. The measured results show that the reflection coefficients of the four elements basically cover the target bands; across N78 and N79, the isolations are better than 8.5 and 17.6 dB for the neighboring elements, and 19.4 and 18.5 dB for the diagonal elements; the average total efficiencies of the four elements are between 38.3% and 39.5% for N78 and 39.3% and 42.6% for N79; all the envelope correlation coefficients are lower than 0.42. [ABSTRACT FROM AUTHOR]

The huge proliferation of the antenna number brought by 5G greatly increases the pressure of the bezels of the 5G terminals. To release the pressure, planar four-antenna module with miniaturization and wideband performance that can be implemented on the back cover is proposed in this article. Four identical dual-mode PIFAs are arranged in a sequentially rotated style and the whole antenna appears in a circular shape. Each antenna element is a slotted quasi-quarter circle with one inner edge shorted and the other two edges left open, and it is coupled fed by an L-shaped microstrip line. A cross line that connects all the four elements together is used to improve the isolation of the neighboring elements. The four-antenna module covering N77 is with the diameter of 30.6 mm and height of 2 mm. The measured results show that for all the four antenna elements, the −6 dB impedance bandwidths cover 3.3–4.2 GHz, all the isolations are better than 9.7 dB, the average total efficiencies are between 36% and 40%, and envelope correlation coefficients (ECCs) are lower than 0.5. To the best of the authors’ knowledge, this is the smallest four-antenna module covering 3.3–4.2 GHz. [ABSTRACT FROM AUTHOR]

This article proposes a novel design of the dual-band antenna pair. Starting from the single-band antenna pair composed of T-shaped monopole and T-shaped slot that are intersected with each other, orthogonal T-monopole and odd-symmetrical slot modes are excited. By adding symmetrical low-pass high-stop filters into the horizontal stub of the T-monopole and high-pass low-stop filters into the gap of the T-slot, an extra mode is introduced for each antenna, producing dual-band operation. Impedance bandwidths and radiation efficiencies of both bands can be adjusted flexibly using the filters. A detailed design guideline is given. The dual-band antenna pair operating at partial N78 (p-N78, 3.4~3.6 GHz) and partial N79 (p-N79, 4.8~4.9 GHz) is with a footprint of $15\times 6$ mm2. The measured results show that the average efficiencies are both −3.4 dB at p-N78/p-N79 for the odd-symmetrical slot and −2.8 dB/−3.7 dB at p-N78/p-N79 for the T-monopole, isolations are better than −16.8 dB at p-N78 and −11.8 dB at p-N79, and ECCs are lower than 0.1 at p-N78 and 0.2 at p-N79. The proposed dual-band antenna pair exhibits great potential to be applied in the fifth-generation (5G) multiple-input multiple-output (MIMO) terminal. [ABSTRACT FROM AUTHOR]