Search

A low-profile and shared aperture dual-polarized (DP) omnidirectional antenna by reusing the structure of an annular quasi-dipole array is presented. The proposed antenna consists of a center-fed circular patch antenna, an annular quasi-dipole array, a wideband one-to-four power divider integrated with the center-fed circular patch antenna, and two annular strips. The center-fed circular patch antenna is utilized as the driven element for the vertically polarized (VP) radiation. The annular quasi-dipole array fed by the one-to-four power divider produces horizontally polarized (HP) radiation. Simultaneously, it also acts as the VP director to improve VP gain and bandwidth. Besides, the two annular strips enhance the HP omni-directivity and gain. In this way, the VP and HP share the same aperture to improve the profile utilization rate effectively. Due to the symmetry of the basic antenna structure, stable DP donut patterns are obtained within the entire operating bandwidth. For demonstration, a 4.1–5.0 GHz prototype is designed, fabricated, and measured. Under a low profile of $0.13\lambda _{0}$ , the prototype realizes a −10 dB overlapped bandwidth of 20%, high port isolation of above 35 dB, and stable DP donut patterns with horizontal gain larger than 1.8 dBi. [ABSTRACT FROM AUTHOR]

In this paper, two 24 GHz horizontally polarized $1 \times 8$ patch antenna arrays were developed for automotive radar applications. The proposed antenna arrays offer the advantages of wide fan beams and high gain. The far-field radiation patterns are widened in the E-plane by disturbing the near-field distribution of each driven patch. In Design I, the driven patch is loaded with a parasitic loop, which functions as a director in the E-plane. Due to the directing effect, the E-plane beamwidth can be increased. The experimental verification prepared for Design I showed that a beamwidth of 130° and a gain of 12.2 dBi can be achieved through this method. To further enhance the beamwidth, another array with each patch loaded with parasitic mushroom-like elements was proposed by Design II. The PMLEs are 180° out of phase to their corresponding driven patch. The cancelation effects can be properly managed to slightly sacrifice the gain of the array in return for a wider beamwidth in the E-plane. Design II exhibits a wider beamwidth of 150° and a lower gain of 11.1 dBi. [ABSTRACT FROM AUTHOR]

A millimeter-wave series–parallel patch antenna array is presented, in which the dual-slot feeding structure is handily implemented using the intrinsic field distribution of TE20 mode in substrate-integrated waveguide (SIW). One 28 GHz patch antenna element fed by the TE20-mode SIW is first designed, achieving a 10 dB impedance bandwidth of 10.2% and a simulated peak gain of 6.48 dBi. Based on the antenna element, a $4 \times 4$ array with a compact series–parallel differential feeding network is developed accordingly. Due to the novel compact SIW-based series–parallel feeding network, the antenna array can achieve superior radiation performances, which is the highlight of this communication. The simulation and measurement results of the proposed antenna array are in good agreement, demonstrating a performance of 8.5% impedance bandwidth, 19.1 dBi peak gain, symmetrical radiation patterns, and low cross-polarization levels (−30 dB in E-plane and −25 dB in H-plane) in the operating frequency band of 26.65–29.14 GHz. [ABSTRACT FROM AUTHOR]