Search

A novel windmill‐shaped metasurface (MTS) structure is firstly presented and applied to realise broadband antennas with stable radiation patterns. Different from conventional square MTS structure, the proposed windmill‐shaped MTS structure is formed by etching several triangular sawtooth slots instead of rectangular slots on the radiating square patch. Through the characteristic mode analysis, it can be found that the proposed MTS structure exhibits a much stable broadside radiation within a large bandwidth of 45.9%. Besides, the tapered edges resulted from the sawtooth slots can be regarded as smoother transitions, which would bring a better impedance matching. Based on above analysis, two antennas with different aperture sizes using the proposed windmill‐shaped MTS are well designed accordingly. Both antennas demonstrate the capability to achieve large impedance bandwidths over 40% and stable radiations (2‐dB gain bandwidth >33%). Compared with the conventional MTS‐based antenna, these proposed antennas improve the bandwidth and radiation performances effectively, showing great promises for modern wireless communication systems. [ABSTRACT FROM AUTHOR]

This communication presents a new multiband multiarray (MBMA) scattering suppression antenna configuration for a dual-band and dual-polarized antenna array with reduced radiation distortion. The proposed antenna array configuration consists of a low-band (LB) antenna element working in the 690–960 MHz band and four high-band (HB) antenna elements working in the 1.7–2.7 GHz band. The LB antenna introduces U-shape structures to the radiation element to neutralize HB scattering currents. On the other hand, the HB antenna involves an LC resonant structure between its radiation arm and feeding balun to suppress LB scattering currents. An antenna array using the proposed LB and HB elements is designed to achieve MBMA functions. Experimental results show that the radiation distortions in both LB and HB bands are improved significantly. The VSWR of less than 1.5, the isolation of more than 25 dB, and the symmetrical radiation pattern are obtained in both bands. [ABSTRACT FROM AUTHOR]

This study develops a differential‐fed filtering patch antenna, which features superior frequency selectivity, compact size, low cross‐polarisation, and symmetrical radiation patterns. The proposed antenna consists of a rectangular patch on the top layer, which is differentially fed by a balun bandpass filter on the bottom layer. A pair of rectangular coupling slots were etched on the middle layer for energy coupling. The patch antenna performs not only as the radiator but also as the last resonator of the whole filter circuit for compactness. A prototype of the proposed filtering antenna operating at 2.45 GHz was fabricated and tested. The measured in‐band peak gain is 5.9 dBi with steep roll‐off at band edges, and the out‐of‐band gain is less than − 25 dBi. Moreover, symmetrical radiation patterns and low cross‐polarisation levels of − 22 dB are also realised for the proposed filtering antenna. [ABSTRACT FROM AUTHOR]