Search

A novel windmill‐shaped metasurface (MTS) structure is firstly presented and applied to realise broadband antennas with stable radiation patterns. Different from conventional square MTS structure, the proposed windmill‐shaped MTS structure is formed by etching several triangular sawtooth slots instead of rectangular slots on the radiating square patch. Through the characteristic mode analysis, it can be found that the proposed MTS structure exhibits a much stable broadside radiation within a large bandwidth of 45.9%. Besides, the tapered edges resulted from the sawtooth slots can be regarded as smoother transitions, which would bring a better impedance matching. Based on above analysis, two antennas with different aperture sizes using the proposed windmill‐shaped MTS are well designed accordingly. Both antennas demonstrate the capability to achieve large impedance bandwidths over 40% and stable radiations (2‐dB gain bandwidth >33%). Compared with the conventional MTS‐based antenna, these proposed antennas improve the bandwidth and radiation performances effectively, showing great promises for modern wireless communication systems. [ABSTRACT FROM AUTHOR]

A low-profile and shared aperture dual-polarized (DP) omnidirectional antenna by reusing the structure of an annular quasi-dipole array is presented. The proposed antenna consists of a center-fed circular patch antenna, an annular quasi-dipole array, a wideband one-to-four power divider integrated with the center-fed circular patch antenna, and two annular strips. The center-fed circular patch antenna is utilized as the driven element for the vertically polarized (VP) radiation. The annular quasi-dipole array fed by the one-to-four power divider produces horizontally polarized (HP) radiation. Simultaneously, it also acts as the VP director to improve VP gain and bandwidth. Besides, the two annular strips enhance the HP omni-directivity and gain. In this way, the VP and HP share the same aperture to improve the profile utilization rate effectively. Due to the symmetry of the basic antenna structure, stable DP donut patterns are obtained within the entire operating bandwidth. For demonstration, a 4.1–5.0 GHz prototype is designed, fabricated, and measured. Under a low profile of $0.13\lambda _{0}$ , the prototype realizes a −10 dB overlapped bandwidth of 20%, high port isolation of above 35 dB, and stable DP donut patterns with horizontal gain larger than 1.8 dBi. [ABSTRACT FROM AUTHOR]

A planar bidirectional circularly polarized (CP) antenna using orthogonal magnetic dipoles (OMDs) without an extra phase shift line is proposed in this work. It consists of a rectangular microstrip magnetic dipole antenna (MMDA) and a loop radiator with two arms directly connected to the open edge of MMDA. The working principle is revealed by the equivalent sources model to provide a clear physical insight at first. The theoretical investigations imply that by controlling the width and the feed locations of the loop antenna on the aperture, the phase and magnitude for CP radiation can be realized in both endfire and backfire directions without introducing an additional phase shift line structure. For demonstration, one antenna prototype is designed and fabricated. The experimental results indicate that an overlapping bandwidth of 5.91% from 2.30 to 2.44 GHz is attained. Compared with the counterpart using OMDs, the proposed antenna exhibits a low design complexity and improved gains of 3.56/1.83 dBic in the endfire/backfire directions. [ABSTRACT FROM AUTHOR]

This communication presents a new multiband multiarray (MBMA) scattering suppression antenna configuration for a dual-band and dual-polarized antenna array with reduced radiation distortion. The proposed antenna array configuration consists of a low-band (LB) antenna element working in the 690–960 MHz band and four high-band (HB) antenna elements working in the 1.7–2.7 GHz band. The LB antenna introduces U-shape structures to the radiation element to neutralize HB scattering currents. On the other hand, the HB antenna involves an LC resonant structure between its radiation arm and feeding balun to suppress LB scattering currents. An antenna array using the proposed LB and HB elements is designed to achieve MBMA functions. Experimental results show that the radiation distortions in both LB and HB bands are improved significantly. The VSWR of less than 1.5, the isolation of more than 25 dB, and the symmetrical radiation pattern are obtained in both bands. [ABSTRACT FROM AUTHOR]

In this paper, a novel filtering antenna based on periodic spoof surface plasmon polaritons (SSPPs) is proposed. Double-sided parallel-strip line (DSPSL) is used to realize the wideband property for the double-layer SSPPs. Filtering performance can be realized by adding via holes and ring resonators in the double-layer SSPPs. The simulated and measured results indicate the high gain of 9.38 dBi and bandwidth of 10.44% can be achieved for the antenna with via holes and ring resonators, the out-of-band rejection is over 17 dBi. Meanwhile, the gain variations are less than 1 dBi in the whole frequency band. Good agreements can be observed between the measured and simulated results, which indicate good potential applications in the communication systems and integrated circuits. [ABSTRACT FROM AUTHOR]

This study develops a differential‐fed filtering patch antenna, which features superior frequency selectivity, compact size, low cross‐polarisation, and symmetrical radiation patterns. The proposed antenna consists of a rectangular patch on the top layer, which is differentially fed by a balun bandpass filter on the bottom layer. A pair of rectangular coupling slots were etched on the middle layer for energy coupling. The patch antenna performs not only as the radiator but also as the last resonator of the whole filter circuit for compactness. A prototype of the proposed filtering antenna operating at 2.45 GHz was fabricated and tested. The measured in‐band peak gain is 5.9 dBi with steep roll‐off at band edges, and the out‐of‐band gain is less than − 25 dBi. Moreover, symmetrical radiation patterns and low cross‐polarisation levels of − 22 dB are also realised for the proposed filtering antenna. [ABSTRACT FROM AUTHOR]

In this paper, two 24 GHz horizontally polarized $1 \times 8$ patch antenna arrays were developed for automotive radar applications. The proposed antenna arrays offer the advantages of wide fan beams and high gain. The far-field radiation patterns are widened in the E-plane by disturbing the near-field distribution of each driven patch. In Design I, the driven patch is loaded with a parasitic loop, which functions as a director in the E-plane. Due to the directing effect, the E-plane beamwidth can be increased. The experimental verification prepared for Design I showed that a beamwidth of 130° and a gain of 12.2 dBi can be achieved through this method. To further enhance the beamwidth, another array with each patch loaded with parasitic mushroom-like elements was proposed by Design II. The PMLEs are 180° out of phase to their corresponding driven patch. The cancelation effects can be properly managed to slightly sacrifice the gain of the array in return for a wider beamwidth in the E-plane. Design II exhibits a wider beamwidth of 150° and a lower gain of 11.1 dBi. [ABSTRACT FROM AUTHOR]