Search

To satisfy the requirement of the sub-6 GHz bands coverage and the 4 × 4 multiple-input--multiple-output (MIMO) specification for fifth-generation (5G) era, a dual-band four-antenna module covering partial 5G bands N78 (3.4–3.6 GHz) and N79 (4.8–4.9 GHz) is proposed for 5G terminal applications. Based on a quarter-circle-shaped dual-mode slotted planar inverted-F antenna (PIFA), the two target bands are covered by the fundamental TM11 mode and a hybrid higher-order mode combined by quasi-TM11 and quasi-TM0,1/2 modes. The four-antenna module is composed of four such PIFA elements that are arranged in a sequentially rotated layout. It presents a circular shape with a diameter of 39.4 mm and is with a low profile of 1.2 mm. The measured results show that the reflection coefficients of the four elements basically cover the target bands; across N78 and N79, the isolations are better than 8.5 and 17.6 dB for the neighboring elements, and 19.4 and 18.5 dB for the diagonal elements; the average total efficiencies of the four elements are between 38.3% and 39.5% for N78 and 39.3% and 42.6% for N79; all the envelope correlation coefficients are lower than 0.42. [ABSTRACT FROM AUTHOR]

The huge proliferation of the antenna number brought by 5G greatly increases the pressure of the bezels of the 5G terminals. To release the pressure, planar four-antenna module with miniaturization and wideband performance that can be implemented on the back cover is proposed in this article. Four identical dual-mode PIFAs are arranged in a sequentially rotated style and the whole antenna appears in a circular shape. Each antenna element is a slotted quasi-quarter circle with one inner edge shorted and the other two edges left open, and it is coupled fed by an L-shaped microstrip line. A cross line that connects all the four elements together is used to improve the isolation of the neighboring elements. The four-antenna module covering N77 is with the diameter of 30.6 mm and height of 2 mm. The measured results show that for all the four antenna elements, the −6 dB impedance bandwidths cover 3.3–4.2 GHz, all the isolations are better than 9.7 dB, the average total efficiencies are between 36% and 40%, and envelope correlation coefficients (ECCs) are lower than 0.5. To the best of the authors’ knowledge, this is the smallest four-antenna module covering 3.3–4.2 GHz. [ABSTRACT FROM AUTHOR]

This article proposes a novel design of the dual-band antenna pair. Starting from the single-band antenna pair composed of T-shaped monopole and T-shaped slot that are intersected with each other, orthogonal T-monopole and odd-symmetrical slot modes are excited. By adding symmetrical low-pass high-stop filters into the horizontal stub of the T-monopole and high-pass low-stop filters into the gap of the T-slot, an extra mode is introduced for each antenna, producing dual-band operation. Impedance bandwidths and radiation efficiencies of both bands can be adjusted flexibly using the filters. A detailed design guideline is given. The dual-band antenna pair operating at partial N78 (p-N78, 3.4~3.6 GHz) and partial N79 (p-N79, 4.8~4.9 GHz) is with a footprint of $15\times 6$ mm2. The measured results show that the average efficiencies are both −3.4 dB at p-N78/p-N79 for the odd-symmetrical slot and −2.8 dB/−3.7 dB at p-N78/p-N79 for the T-monopole, isolations are better than −16.8 dB at p-N78 and −11.8 dB at p-N79, and ECCs are lower than 0.1 at p-N78 and 0.2 at p-N79. The proposed dual-band antenna pair exhibits great potential to be applied in the fifth-generation (5G) multiple-input multiple-output (MIMO) terminal. [ABSTRACT FROM AUTHOR]

This paper proposes a polarization-orthogonal co-frequency dual antenna pair suitable for fifth-generation (5G) multiple-input multiple-output (MIMO) smartphone with metallic bezels. The proposed spatial-reuse dual antenna pair consists of a split on the metallic bezel and a slot on the mainboard ground, where the slot is centered on the split. Two orthogonal degenerate characteristic modes operating at half wavelength including in-phase current and slot modes can be excited on the same antenna structure. An end-shorted microstrip line that crosses the split is used to excite the in-phase current mode, producing $y$ -polarized radiation, while a symmetrical slot-centered Y-shaped feeding network with its shorted ends crossing the slot is adopted to excite the slot mode, producing $x$ -polarized radiation. To the best of authors’ knowledge, this is the first time that a co-frequency dual antenna pair suitable for smartphone with metallic bezels is proposed. A sub-6 GHz dual antenna pair operating at 3.5 GHz that occupies a footprint of $25 \times 7 \times 1.5$ mm3 shows a simulated isolation better than −24.1 dB without any external decoupling measures and an envelope correlation coefficient (ECC) lower than 0.008. A four-antenna MIMO array is fabricated and measured to verify the feasibility. Across the operation band, the measured isolation of the antenna pair is better than −20.1 dB and other isolation levels are all better than −12.7 dB, the ECCs of any two antennas are lower than 0.13, and the total efficiency range of the four antennas is 35.2%~64.7%. The proposed dual antenna pair exhibits a great potential to be applied in future 5G MIMO smartphone. [ABSTRACT FROM AUTHOR]

A fold monopole/dipole/loop antenna offers unique advantages over a conventional Planar Inverted-F Antenna (PIFA) and monopole antenna for a mobile cellular device. Perhaps the most significant benefit is the fact that up to three resonant modes could be generated in a single continuous loop structure. In this paper, a novel hexa-band internal folded monopole/dipole/loop antenna has been proposed. The proposed antenna has four resonances in which three of them are 0.5\lambda, 1\lambda and 1.5\lambda modes. The distinctive feature of the antenna is an extra 2\lambda folded dipole mode, which has not been reported so far, is excited and utilized. All these four modes can be employed to cover the Low LTE700/GSM850/900 Band (LB: 698–960 MHz) and the High GSM1850/1900/UMTS2100 Band (HB: 1710–2170 MHz). The proposed loop antenna has been simulated, prototyped and tested. It is shown that the numerically simulated results are in close agreement with the experimental prototype results and proved that the antenna operates as proposed. [ABSTRACT FROM PUBLISHER]