Search

This paper presents a novel antenna design with an enhanced gain‐bandwidth product for modern communication networks, including 5G systems. The design is consistent with 17 unit cells of a composite right/left‐hand (CRLH) structure with an electromagnetic band gap of Hilbert inclusions. Therefore, the resulting design occupies an area of 40 × 200 mm2 of a Taconic RF‐43 substrate. The maximum antenna gain is 16 dBi at 5.5 GHz, which is very applicable for long‐range communication systems. Nevertheless, the antenna performance is controlled with optical switches of light‐dependent resistors (LDR) technology. Therefore, the antenna performance is tested with different switching seniors to investigate the possibility of reconfiguration scenarios at various frequency bands. However, the antenna gain is highly affected by changing LDR switching status; for example, at 5.5 GHz, the antenna gain is varied between 7 and 16 dBi. Thus, the proposed antenna is an excellent candidate for direct amplitude modulation. Finally, the antenna simulation results and measurements agree very well with each other. [ABSTRACT FROM AUTHOR]

With the development of communication systems and antennas, various challenges arise that require antennas of small size with enhanced performance. Metamaterials (MTM) defects introduced a considerable solution to such a challenge. Therefore, in this paper, a lightweight with low profile antenna is designed based on a novel design of a Composite Right/Left-Handed CRLH-MTM Hilbert array. The proposed CRLH-MTM unit cell consists of a T-symmetric CRLH unit cell conjugated to the 3rdorder Hilbert on the ground plane through a T-stub structure to enhance the gain-bandwidth product. CST-MWS is used to stimulate and design the proposed antenna structure. The antenna parameters are optimized to evaluate the antenna performance in gain and S11. As a result, the antenna can operate forward and backwards with a large scanning angle ranging from +34o to - 134o with changing frequency, and dual-band extended from 3.3GHz to 4.2GHz 4.86GHz 5.98GHz with a maximum gain of 7.24dBi and 3.74dBi, respectively. The beam steering is achieved by trough controlling the switching operation of PIN diodes. As a result, the antenna can scan up to 8° from 34° to 42° at 3.5GHz with constant gain along with the operating range. [ABSTRACT FROM AUTHOR]