Search

A novel method of dual-band dual-beam control (DDC) is proposed and applied in metasurface antennas (MSAs). Based on this DDC method, the feeding network employed in MSAs can realize independent forward and/or backward radiation of two bands. Combining the metasurface cells and feeding network, the desired bands and the corresponding beam angles of MSAs can be controlled. The symmetrical two-port feeding network consists of uniformly spaced slots in the ground and a bent microstrip line beneath the slots, so that two identical beams are realized. The radiation direction of the two bands can be implemented independently by adjusting the distance of the slots and length of the bent line simultaneously. To verify the design strategies, two prototypes (MSA A and MSA B) with different performance are designed, respectively. As a result, the proposed MSAs can achieve independent beam angels of two bands with low profile and compact design. The above good features make the proposed MSAs potential candidates in base-station antennas of high-capacity wireless communication system. [ABSTRACT FROM AUTHOR]

A novel wideband polarization rotating element based on a metasurface antenna is proposed. To achieve high polarization isolation and low cross polarization, a wideband differential-driven dual-polarized metasurface antenna is designed accordingly. By connecting the two differential ports of the dual-polarized metasurface antenna, a wideband polarization rotating metasurface element (PRMSE) is realized, while a large polarization rotating bandwidth of 27.6% can be achieved. In addition, combining the true-time delay (TTD) microstrip lines, the PRMSE can achieve linear phase response and can be applied to the folded reflectarray design. Based on the PRMSE, a 140-element center-fed folded reflectarray (FRA) is designed and fabricated. The measured radiation patterns of the FRA are stable within the frequency range from 26 to 32 GHz. The measured −10 dB impedance bandwidth is 25.4% from 25.4 to 32.8 GHz. Furthermore, the measured 1 dB gain drop and 3 dB gain drop are 20.7% and 34.5%, respectively. The measured sidelobe levels are below −13 dB and the cross-polarization levels are below −30 dB at the broadside direction within the entire operating band. [ABSTRACT FROM AUTHOR]

An ultra-wideband transition from microstrip line to ridge gap waveguide (GWG) is proposed for W-band system integration with antenna array and a transceiver. Substrate integrated waveguide bridge is used in the proposed transition for electromagnet wave propagation between microstrip line and ridge GWG, which can realize impedance matching for a wideband frequency range. Back-to-back transition prototypes are fabricated by the low-temperature co-fired ceramic (LTCC) technique, and the probe measurement results show that the transition can work at W-band. Moreover, the application of the proposed transition in a LTCC slot antenna array with magnetic coupling ridge GWG feeding network operated at 77/79 GHz is studied comprehensively. The antenna performance measurements demonstrate that the proposed transition has a potential massive application in the GWG active antennas. [ABSTRACT FROM AUTHOR]

This paper presents a wideband 60-GHz antenna array with a dual-resonant slot-patch structure. A multilayered low-temperature co-fired ceramic substrate was used for antenna fabrication. A half-wavelength resonant slot was designed with a backed substrate-integrated waveguide (SIW) cavity to enhance the front radiation. The inverted microstrip center-fed structure was designed for easy signal excitation and superior impedance matching. A parasitic patch was also applied to enhance for bandwidth and gain enhancement. The effects of the SIW cavity-backed slot antenna with and without parasitic patches were empirically examined. The simulated results show that adding parasitic patches increased the resonance of the poles and improved antenna gain by 1.85 dB and bandwidth by 9%. A 2\,\times\,2 dual-resonant slot-patch antenna array was designed to further enhance the gain and bandwidth. The equipment setup for on-chip measurements of gain and radiation patterns was established. The measured S11 showed a wide bandwidth of 23%. The measured gain for the four-element antenna array was 9 dBi with slight fluctuations over the 57–64-GHz frequency range. [ABSTRACT FROM AUTHOR]