Search

A millimeter-wave series–parallel patch antenna array is presented, in which the dual-slot feeding structure is handily implemented using the intrinsic field distribution of TE20 mode in substrate-integrated waveguide (SIW). One 28 GHz patch antenna element fed by the TE20-mode SIW is first designed, achieving a 10 dB impedance bandwidth of 10.2% and a simulated peak gain of 6.48 dBi. Based on the antenna element, a $4 \times 4$ array with a compact series–parallel differential feeding network is developed accordingly. Due to the novel compact SIW-based series–parallel feeding network, the antenna array can achieve superior radiation performances, which is the highlight of this communication. The simulation and measurement results of the proposed antenna array are in good agreement, demonstrating a performance of 8.5% impedance bandwidth, 19.1 dBi peak gain, symmetrical radiation patterns, and low cross-polarization levels (−30 dB in E-plane and −25 dB in H-plane) in the operating frequency band of 26.65–29.14 GHz. [ABSTRACT FROM AUTHOR]

A novel steerable dual-beam metasurface antenna (MSA) with controllable feeding mechanism is proposed. The proposed MSA consists of $7 \times 10$ square metasurface cells and is fed by a completely symmetrical controllable network, which includes three dumbbell-shaped coupling slots etched on the ground and two-port stepped impedance line beneath the ground. The network can flexibly control the magnitude and phase of the coupling energy from the feeding line to the radiated metasurface cells via the slots, so as to realize two desired symmetrical beams. Owing to good directional radiation of the MSA, the beams of the proposed MSA exhibit better front-to-back ratio, higher gain, and higher channel isolation than those of traditional traveling-wave slot antennas. Moreover, benefiting from the controllable feeding mechanism, impedance matching, sidelobe suppression, and isolation of the ports can be further improved. Consequently, the two achieved beams are, respectively, oriented at ±30°in azimuth plane with 10 dB beamwidth of about 120°, high-peak gains of 12.8 dBi and cross level at two beams junction of about −10 dB; meanwhile, the isolation of the two ports is over 15 dB within the band of interests (5.23 and 5.40 GHz). For demonstration of the design strategy, one $1 \times 2$ dual-beam MSA array with gain of 14.8 dBi and similar beam performance is designed and fabricated. Due to the controllable steerable beams and the simple mechanism without complex beamforming networks, phase shifters or large footprint, the proposed steering dual-beam MSA array can be expected to find potential applications in multibeam base stations. [ABSTRACT FROM AUTHOR]

This communication presents a millimeter-wave wideband dual-polarized low-temperature cofired ceramics (LTCC) antenna array based on metasurfaces (MSs) for beam-scanning applications. Benefiting from the wideband and large-freedom property of MS-based structures, a novel ±45° dual-polarized wideband MS-based antenna (MSA) element with high isolation is designed. The antenna element is fed by two orthogonal striplines on different layers, through a crosslike dog-bone slot and a narrow slot, respectively, to realize the two polarizations. The feeding structure consists of slot–stripline–slot–stripline from top to bottom and is specially designed to improve the polarization isolation of the antenna element. The proposed MSA element is compactly arranged with a small distance ($ < 0.5\lambda$) to construct a 4 $\times $ 4 array integrated in an LTCC package, where via walls with metal ring strips are loaded between adjacent elements to reduce the gain fluctuation. Consequently, the array can achieve a good beam-scanning capability over a wide band of 19.5% with a maximum scanning angle up to ±55° and a small gain variation of less than 3 dB. Meanwhile, the active $S$ parameters almost always remain below −10 dB, enabling good impedance matching when scanning at all angles. With these features, the proposed design has potential for application in 5G base-station systems. [ABSTRACT FROM AUTHOR]

This article presents a novel broadband dual-polarized filtering patch antenna array using low-temperature cofired ceramic (LTCC) process for 5G millimeter-wave (mmW) applications. The filtering antenna element is implemented using a ± 45° polarized patch antenna fed by two pairs of differential L-type probes. An additional square ring and open strips are connected to each probe, resulting in radiation nulls and realizing the lower/upper stopband rejection level over 24 dB with skirt selectivity. The cross coupling among these structures not only introduces filtering responses, but also contributes to broadening the passband of 24.25–29.5 GHz covering 5G n257/n258/n261 bands. The antenna performance is validated by equivalent circuits based on transmission line models, which reveals clearly the principles of filtering antenna step by step and provides guidelines for further designs. The proposed filtering antenna element is expanded to a $4\times 4$ filtering antenna array with shunt-fed feeding networks. The spacing between elements is $0.48~\lambda _{0}$. The measured results demonstrate that the array performs good filtering characters including high stopband rejection, high selectivity, and wide upper stopband up to 40 GHz, where the antenna efficiency (considering radiations from all the directions) is less than 5%. In addition, the differential feeds provide symmetric radiation patterns with low cross-polarized counterparts. Compared with other reported works, the proposed filtering antenna/array has excellent performances of wideband, high stopband rejection and wide upper stopband for potential 5G mmW applications. [ABSTRACT FROM AUTHOR]

A novel method of dual-band dual-beam control (DDC) is proposed and applied in metasurface antennas (MSAs). Based on this DDC method, the feeding network employed in MSAs can realize independent forward and/or backward radiation of two bands. Combining the metasurface cells and feeding network, the desired bands and the corresponding beam angles of MSAs can be controlled. The symmetrical two-port feeding network consists of uniformly spaced slots in the ground and a bent microstrip line beneath the slots, so that two identical beams are realized. The radiation direction of the two bands can be implemented independently by adjusting the distance of the slots and length of the bent line simultaneously. To verify the design strategies, two prototypes (MSA A and MSA B) with different performance are designed, respectively. As a result, the proposed MSAs can achieve independent beam angels of two bands with low profile and compact design. The above good features make the proposed MSAs potential candidates in base-station antennas of high-capacity wireless communication system. [ABSTRACT FROM AUTHOR]

An ultra-wideband transition from microstrip line to ridge gap waveguide (GWG) is proposed for W-band system integration with antenna array and a transceiver. Substrate integrated waveguide bridge is used in the proposed transition for electromagnet wave propagation between microstrip line and ridge GWG, which can realize impedance matching for a wideband frequency range. Back-to-back transition prototypes are fabricated by the low-temperature co-fired ceramic (LTCC) technique, and the probe measurement results show that the transition can work at W-band. Moreover, the application of the proposed transition in a LTCC slot antenna array with magnetic coupling ridge GWG feeding network operated at 77/79 GHz is studied comprehensively. The antenna performance measurements demonstrate that the proposed transition has a potential massive application in the GWG active antennas. [ABSTRACT FROM AUTHOR]