Search

Aqueous zinc ion batteries (AZIBs) have stimulated extensive attention due to their environmental friendliness and low cost. Unfortunately, the inevitable dendrite growth and corrosion on the zinc (Zn) anode severely hinder the practical application of AZIBs. Herein, an amino acid containing an imidazole group is introduced as an effective additive to address these issues. The dynamic conversion of amino acid and protonated amino acid creates a pH buffer function that regulates solution pH in real time, inhibits hydrogen evolution reaction (HER), and eliminates notorious by‐products. In addition, the protonated amino acid is preferentially adsorbed on the Zn anode, preventing contact of the active water with the Zn surface and promoting homogeneous Zn deposition. Thus, the amino acid‐based electrolyte promotes dendrite free plating/stripping with a Coulombic efficiency up to 99.67% and cycle lifetime of 2600 h. In particular, a depth of discharge of up to 87% can be achieved with an ultra‐high areal capacity of 24 mAh cm−2. The developed Zn||CVO full cell also exhibits better electrochemical performance than that without additives. This work provides an effective and convenient approach for safe and efficient Zn‐ion batteries. [ABSTRACT FROM AUTHOR]

The kinetics and durability of conversion‐based anodes greatly depend on the intrinsic stress regulating ability of the electrode materials, which has been significantly neglected. Herein, a stress dissipation strategy driven by multi‐interface built‐in electric fields (BEFs) and architected structure, is innovatively proposed to design ultrafast and long‐term sodium ion storage anodes. Binary Mo/Fe sulfide heterostructured nanorods with multi‐interface BEFs and staggered cantilever configuration are fabricated to prove our concept. Multi‐physics simulations and experimental results confirm that the inner stress in multiple directions can be dissipated by the multi‐interface BEFs at the micro‐scale, and by the staggered cantilever structure at the macro‐scale, respectively. As a result, our designed heterostructured nanorods anode exhibits superb rate capability (332.8 mAh g−1 at 10.0 A g−1) and durable cyclic stability over 900 cycles at 5.0 A g−1, outperforming other metal chalcogenides. This proposed stress dissipation strategy offers a new insight for developing stable structures for conversion‐based anodes. [ABSTRACT FROM AUTHOR]

[Display omitted] MoS 2 is regarded as a hopeful anode candidate for sodium-ion batteries (SIBs) due to their various merits such as high specific capacity, abundant raw material reserves and low cost. However, their practical application is impeded by unsatisfied cycling ability due to the intense mechanical stress and unstable solid electrolyte interphase (SEI) during Na+ insertion/extraction process. Herein, spherical MoS 2 @polydopamine derived highly conductive N -doped carbon (NC) shell composites (MoS 2 @NC) are designed and synthesized to promote the cycling stability. The internal MoS 2 core is optimized and restructured from the original micron-sized block to the ultra-fine nanosheets during initial 100–200 cycles, which not only improves the utilization of electrode materials but also shortens the ion transport distance. The outer flexible NC shell effectively maintains the original spherical structure of the overall electrode material and prevents the occurrence of large-scale agglomeration, which is conducive to form a stable SEI layer. Therefore, the core–shell MoS 2 @NC electrode presents a remarkable cyclic stability and a capable rate performance. Under a high rate of 20 A g−1, the high capacity of 428 mAh g−1 can be acquired after over ultra-long 10,000 cycles without obvious capacity loss. Moreover, the MoS 2 @NC‖Na 3 V 2 (PO 4) 3 full-cell assembled by employing commercial Na 3 V 2 (PO 4) 3 cathode can achieve a high capacity retention of 91.4% after 250 cycles at 0.4 A g−1. This work reveals the promising prospect of MoS 2 -based materials as anode of SIBs, and also has some inspirations on the structural design for conversion-type electrode materials. [ABSTRACT FROM AUTHOR]