Search

In the oil industry, during the production of oil and gas, barium sulfate (BaSO 4) scale may occur on the inner walls of the pipelines leading to the reduction of the internal diameter, making the fluids' passage difficult and complicating the calculation of the fluids volume fraction. This paper presents a methodology to predict volume fraction of fluids and BaSO 4 scale thickness from obtaining spectra of two NaI(Tl) detectors that record the transmitted and scattered beams of gamma-rays. Theoretical models for a multiphase annular flow regime (gas-saltwater-oil-scale) were developed using MCNP6 code, which is a mathematical code based on the Monte Carlo method. The simulated data was used to train a deep neural network (DNN) to predict the volume fraction of gas, saltwater and oil, and the concentric scale thickness. A Python optimization library called Optuna was used for the hyperparameters search to design the DNN architecture. The methodology presented great results, especially for scale thickness prediction. Although the results for saltwater did not reach the same level, it was still possible to predict approximately 70% of the patterns up to 10% relative error. This achievement indicates the possibility to calculate the volume fraction of fluids and the concentric scale thickness in the offshore oil industry using gamma densitometry and deep learning models. • Prediction of the volume fraction of fluids and scale in an annular multiphase system. • Methodology based on transmitted and scattered beams of gamma-rays (dual-modality). • Application of deep neural network using Python hyperparameters library. • Dataset was developed using the MCNP6 code. [ABSTRACT FROM AUTHOR]

Scale formation is one of the major problems in the oil industry as it can accumulate on the surface of the pipelines, which could even fully block the fluids' passage. It was developed a methodology to detect and quantify the maximum thickness of eccentric scale inside pipelines using nuclear techniques and an artificial neural network. The measurement procedure is based on gamma-ray scattering using NaI(Tl) detectors and a137Cs radiation source that emits gamma-rays of 662 keV. The simulations considered an annular flow regime composed of barium sulfate scale, oil, saltwater and gas, and three percentages of these fluids were used. In the present investigation, a study of detectors configuration was carried out to improve the measurement geometry and the simulations were made using the MCNP6 code, which is a mathematical code based on the Monte Carlo method. The counts registered in the detectors were used as input data to train a deep neural network (DNN) that uses rectifier activation functions instead of the usually sigmoid-based ones. In addition, a hyperparameters search was made using open software to develop the final DNN architecture. Results showed that the best detector configuration was able to predict 100% of the patterns with the maximum relative error of 5%. Moreover, the achieved mean absolute percentage error was 0.42% and the regression coefficient was 0.99996 for all data. The results are promising and encourage the use of DNN to calculate inorganic scale regardless of the fluids volume fraction inside pipelines. • Prediction of the maximum eccentric scale thickness using gamma-ray scattering. • Application of deep neural network using hyperparameters search software. • The prediction is made regardless of the fluids volume fraction in the multiphase system. • Measurement geometry is composed of two detectors and a137Cs radiation source. • Patterns of the eccentric scale thickness were simulated using the MCNP6 code. [ABSTRACT FROM AUTHOR]

The methodology presented in this study is based on a 149.5 keV X-ray beam and two planar germanium detectors for X-ray transmission and scattering measurements for prediction of volume fractions in a three-phase system. Fluid volume fractions have been modeled using the MCNP6 code for an annular flow regime. A mathematical algorithm based on an artificial neural network was used to correlate the energy spectra from both detectors with the fluids volume fractions. The pulse height distributions obtained by the detectors are used as input data of the network that outputs the volume fractions of gas and water. The mean relative error, using the procedure presented here, for all data, was below 2.5% for both phases investigated. These results show that the methodology based on an X-ray beam has the potential to be used with flow meters. • An artificial neural network was used to predict volume fraction of gas, water, and oil. • X-ray beam and two planar germanium detectors for X-ray transmission and scattering measurements for prediction of volume fractions. • Fluid volume fractions have been modeled using the MCNP6 code for an annular flow regime. • The spectra obtained by the detectors are used as input data of the network that outputs gas and water volume fractions. [ABSTRACT FROM AUTHOR]

• The proposed geometry composes gamma-rays and two NaI(Tl) detectors. • Different thicknesses and relative positions of scale for the annular flow regime were modeled using the MCNP code. • A Backpropagation 5-layer perceptron network was used for scale prediction. • The gamma-ray scattering was used to quantify the maximum thickness of eccentric scales (BaSO 4). • The maximum scale was predicted independently of its position inside the tube and the presence of the fluids. This study investigates a methodology to study the deposition of barium sulfate scales (BaSO 4) commonly found in the oil industry; it causes an internal diameter decrease, making it difficult for the flow. A measurement procedure was elaborated on gamma-ray scattering with three NaI(Tl) detectors and a 137Cs gamma-ray source to detect and quantify the maximum thickness of eccentric scale. The detectors data were used to train the artificial neural network for the prediction of the maximum scale thickness values regardless of oil, saltwater, gas and scale inside the tube. A data subset for training and evaluation of the artificial neural network generalization capability was generated using the MCNP6 code. Different thicknesses and positions of the maximum scale value were considered. The results show that more than 90% of the patterns presented relative errors lower than ±10%. [ABSTRACT FROM AUTHOR]