Search

Fluorescence-based aptasensors possess high sensitivity but are complicated and usually require multistep labeling and modification in method design, which severely limit the practical applications. Here, a label-free fluorescence-based aptasensor, consisting of aptamer, gold nanoparticles (AuNPs), and cadmium telluride (CdTe) quantum dots (QDs), was developed for the detection of sulfadimethoxine (SDM) in water and fish based on the specific recognition of SDM-aptamer and the inner filter effect of QDs and AuNPs. In the absence of a target, AuNPs dispersed in salt solution because of the aptamer protection, which could effectively quench the fluorescence emission of QDs, while in the presence of SDM, AuNPs aggregated due to the specific recognition of SDM-aptamer to SDM, which resulted in fluorescence recovery. A linear response of SDM concentrations in the range of 10–250 ng mL−1 ( R2 = 0.99) was obtained, and the detection limit was 1.54 ng mL−1 (3σ, n = 9), far below the maximum residue limit (100 ng mL−1) of SDM in edible animal tissues regulated by China and the European Commission. The fluorescence-based aptasensor was applied to the detection of SDM in aquaculture water and fish samples with high accuracy, excellent precision, and ideal selectivity. The results indicated that the developed aptasensor was simple in design, easy to operate, and could be used to detect rapidly and accurately SDM in water and fish samples.

A facile and practical ratiometric fluorescence probe based on two CdTe quantum dots (QDs) coated with molecularly imprinted polymers (MIPs) was prepared for the detection of trace malachite green (MG) in fish. Two CdTe QDs coated with MIPs were fabricated by a one-pot method using MG, (3-aminopropyl) triethoxysilane (APTES) and tetraethyl orthosilicate (TEOS) as template, functional monomer, and cross-linker, respectively. CdTe QDs with λem 530 nm (gQDs) and 630 nm (rQDs) were used as the referential fluorophore and target sensitive fluorophore, respectively. The fluorescence intensity of gQDs remained unchanged in the presence of MG, while the fluorescence of rQDs could be quantitatively quenched by MG based on the strategy of fluorescence resonance energy transfer. The ratiometric fluorescence probe (MIPs@gQDs&rQDs) was characterized by transmission electron microscopy and Fourier transform infrared spectroscopy. The linear range of MG detection was 0.1–32 μmol L−1 with a detection limit of 8.8 μg kg−1. The constructed probe has been successfully applied to the detection of MG in fish with the recoveries of 92.3–109.1%, which were validated by the method of HPLC. The result indicated that the probe possessed rapid response, wide linear range, high sensitivity, and relatively high selectivity, and was low-cost and easy in operation in the detection of MG in fish samples.

A dichromatic label-free aptasensor was described for sulfadimethoxine (SDM) detection. Compared with the binding of SDM-aptamer to SDM, the higher affinity of aptamer to cDNA may result in the hybridization of dsDNA. In the presence of SDM, the aptamer specifically binds to SDM, leading to a blue color of AuNPs in deposit and fluorescence at 530 nm in supernatant after adding cDNA and SGI. With no target of SDM, AuNPs protected with the aptamer re-disperse in PBS with a red color, and no fluorescence occurs in supernatant. Based on the principle, SDM can be quantitatively detected through both fluorescent emission and AuNPs color changes with recoveries ranging from 99.2% to 102.0% for fish and from 99.5% to 100.5% for water samples. An analytical linear range of 2–300 ng mL−1 was achieved with the detection limits of 3.41 ng mL−1 for water and 4.41 ng g−1 for fish samples (3σ, n = 9).

In this work, we describe a simple, inexpensive and fast method for the generation of molecularly imprinted polymer (MIP) film on quartz crystal microbalance (QCM) crystals using mussel-inspired polymer. Commonly known as a neurotransmitter, dopamine is also a small-molecule mimic of the adhesive proteins of mussels. Polymerization of dopamine in the presence of template molecule (1,3,5-pentanetricarboxylic acid, an analogue of domoic acid, in this case) could produce an adherent molecularly imprinted polydopamine film coating on QCM crystals. Advantages, such as high hydrophilicity, high biocompatibility and controllable thickness, make this molecularly imprinted polydopamine film an attractive recognition element for sensors. Selective rebinding of domoic acid on mussel-inspired molecularly imprinted polymer (m-MIP) coated crystal was observed as a frequency shift quantified by piezoelectric microgravimetry with the QCM system. The decreasing frequency shows a good linear relationship with the concentration of domoic acid. The quantitation limit of domoic acid was 5 ppb with the linear range of 0-100 ppb. The QCM sensor has high selectivity and was able to distinguish domoic acid from its analogous p-phthalic acid and o-phthalic acid owing to the molecular imprinting effect. In addition, the practical analytical performance of the sensor was examined by evaluating the detection of domoic acid in mussel extracts with satisfactory results. It is envisaged that m-MIP could be suitable as recognition element for sensors and the proposed m-MIP QCM sensor could be employed to detect analyte of interest in complex matrices.