Search

Higher stocking rates of lambing ewes have been associated with poorer ewe-lamb behaviour and lamb survival. This study tested the hypothesis that increasing the mob size and stocking rate of lambi...

The objectives of this study were to validate the application of Bluetooth technology to determine maternal pedigree and to determine ewe–lamb spatial relationships in extensive farming systems. A total of 35 first-cross Merino ewes (Merino × Border Leicester and East Friesian) and 23 of their lambs aged 1 to 3 wk were fitted with activity monitors equipped with Bluetooth (BT) technology (ActiGraph wGT3X-BT) by means of halters and collars, respectively. The BT devices on lambs were programmed to receive wireless signals once every minute from nearby BT units on ewes, which were programmed as beacons sending BT signals 4 times every second. Ewes and lambs fitted with sensors were dispatched into the paddocks, and after 10 d, the sensor units were retrieved and the BT signals received by lambs were downloaded using the ActiGraph software. The maternal pedigree of the lambs was determined as the ewe from which the lamb received the most BT signals. The distance between the lamb receiving the signal and the ewe sending the signal was estimated from the strength of BT signal received. The pedigree determined by BT was compared with the pedigree determined by DNA profiling and verification. The results showed that the accuracy of maternal pedigree determined by BT signals reached 100% within the first 15 min of returning animals to pasture of ewes and lambs fitted with sensors. Maternal signals (counts/d) received by 1-, 2-, and 3-wk-old lambs were 617 ± 102, 603 ± 54, and 498 ± 36, respectively, and the corresponding nonmaternal signals received were 140 ± 27, 106 ± 30, and 155 ± 39, respectively. Maternal signals received during the dark period were significantly higher than the maternal signals received during the light period (P < 0.05). Maternal signals received during the light period by 3-wk-old lambs were significantly lower when compared with those received by 1- and 2-wk-old lambs. Over 90% of the BT signals received from within 2 m of the lamb were from its mother. The maternal BT signals expressed as a portion of total BT signals decreased with increasing distance from the lamb. The results show that BT wireless networking is a fast and reliable method for the determination of maternal pedigree of lambs in extensive farming systems. In addition, wireless BT technology is also useful in determining mother–offspring spatial relationships.

At least 25% of lambs born in Australia die before marking. Research across southern Australia has demonstrated that reducing mob size at lambing by 100 ewes will, on average, increase the survival of single-born lambs by 0.8% and twin-born lambs by 2.2%. In this paper we assessed the economic value of lambing ewes in smaller mobs to improve lamb survival. The analysis considered scenarios for Merino and non-Merino flocks where producers subdivided lambing paddocks using temporary or permanent fencing, or where ewes were reallocated within existing paddocks based on ewe pregnancy status. Optimum mob sizes were most sensitive to the type of fencing used for subdivision, whether ewes were single- or twin-bearing, whether the effect of paddock size on potential stocking rate was included and the target return on investment. Breed, ewe stocking rate, scanning percentage and lamb price also impacted optimum mob size but had a smaller effect. The optimum mob size for twin-bearing Merino and non-Merino ewes was between 34% and 60% that of single-bearing ewes and this was similar for scenarios where paddocks were subdivided or ewes were reallocated within existing paddocks. Permanent subdivision of paddocks also presents an opportunity to increase stocking rate by capitalising on the benefits of improved pasture utilisation in smaller paddocks. The relationship between paddock size and pasture utilisation is not well quantified but it has an important effect on optimum mob and paddock size. The value of reallocating ewes within existing paddocks was greatest at a scanning percentage of 150% as this presents the greatest opportunity to alter mob sizes for single- and twin-bearing ewes. The economic return from adjusting the relative mob size of twin-bearing ewes from 100% to 50% that of single-bearing ewes was up to $0.27/Merino ewe/yr and $0.44/non-Merino ewe/yr with lamb at $6/kg carcass weight. Overall, these analyses demonstrate that reducing mob size at lambing can be a profitable strategy for improving lamb survival depending on the current size of lambing mobs. However, it is difficult to provide generic recommendations to producers for the optimum mob size of ewes and value of paddock subdivision because these are dependent on enterprise-specific factors.

Context Data collected from producers in south-eastern Australia found that the survival of twin-born lambs decreased by 3.5% for each extra 100 ewes in the mob at lambing. Increasing stocking rate by 1 ewe/ha decreased lamb survival by a further 0.7%. These survey findings suggest that lamb survival could be improved by optimising the allocation of ewes to mobs and paddocks at lambing. Aim The present paper reports two experiments. Experiment 1 tested the hypotheses that (1) the survival of twin-born lambs would be greater when ewes lamb in smaller mobs and at lower stocking rates, and (2) the effects of mob size and stocking rate would be greater in Merinos than in non-Merino breeds. Experiment 2 tested the hypothesis that the survival of twin-born Merino lambs would be greater at lower mob sizes when ewes lambed at stocking rates

Improving the reproductive performance of sheep is a national research priority, but identifying which components of the reproductive process should be the highest priority for further research is complex. The analysis reported in this paper tested the hypothesis that research areas can be prioritised using knowledge of potential gains and bio-economic modelling of critical control points. The analysis was carried out in two parts and the control points included increasing conception, increasing survival of single- or twin-born lambs, increasing survival of ewes at lambing, increasing weaner survival and increasing early reproductive success. For each control point, four productivity levels were examined and the average change in profit per unit of change in the control point per animal was calculated for three flock types. The second component quantified the potential industry gain from the change in profit per unit in each control point, the potential for change (number of units) and the potential adoption (number of ewes or weaners). On the basis of the assumptions used, increasing survival of twin-born lambs was the area with the highest pay-off and had an estimated value of AU$515 million. The value of increasing twin-lamb survival compared with single-lamb survival was affected by the proportion of single- and twin-bearing ewes in the flock. In a flock based on maternal ewes, there are relatively more twin-bearing ewes, so increasing twin survival was a higher priority than for flocks based on Merino ewes in which the proportion of twins was lower. The analysis suggested that the second most important area for future research was improving reproduction from ewe lambs with a pay-off of AU$332 million, followed by improving survival of ewes AU$303 million, improving survival of single born lambs AU$285 million, improving the number of lambs conceived AU$235 million, improving reproduction from 2-year-old ewes AU$221 million and, finally, improving weaner survival AU$52 million. The priorities determined using this method were robust and varying the assumptions of the bio-economic analysis had little impact on the priorities. There was no change in the overall ranking of the critical control points from either increasing the meat or wool price by 20% or altering the flock structure of the Merino flock. Therefore, we can be confident that the priorities determined in the present analysis with current prices and production systems will be valid in to the future.