Search

Here, we describe proof of concept of a novel method for delivering volatile anaesthetics, where the liquid anaesthetic (sevoflurane or isoflurane) is formulated into an emulsion that is contained in a compact, lightweight device through which carrier gas flows. Release of anaesthetic is achieved by stirring of the formulation, allowing controlled and responsive release of anaesthetic at a variety of fixed flow rates between 0.5 l.min-1 and 5 l.min-1 , with ventilated, non-ventilated and draw-over breathing systems. Anaesthetic release was evaluated using target anaesthetic concentrations ranging from 0.5% v/v to 8% v/v to mimic those typically required for induction and maintenance of anaesthesia, and lower concentrations suitable for sedation. Under all conditions, output could be maintained within 0.1% v/v of the intended setting, and the device could deliver a controlled level of anaesthetic for at least 60 min, with compensation for different ambient temperatures (10-30 °C) and carrier gas flow rates. This device offers a simple, inexpensive method of delivering safe concentrations of volatile anaesthetics for a wide range of applications. [ABSTRACT FROM AUTHOR]

We compared insertion rates of single-use polyvinyl chloride laryngeal mask airways (LMAs) vs single-use silicone LMAs in 72 anaesthetised patients. Both airways were produced by Flexicare Medical. Laryngeal mask airway insertion was successful on the first attempt in 68/72 (94%) polyvinyl chloride LMAs vs 64/72 (89%) silicone LMAs (p = 0.39). Overall insertion rates were 72/72 (100%) for the polyvinyl chloride LMAs and 71/72 (99%) for the silicone LMAs (p = 1.0). Mean (SD) insertion times were similar for polyvinyl chloride and silicone LMAs: 24.3 (5.1)s vs 24.8 (7.8)s (p = 0.64). Laryngeal mask airway position, as assessed using a fibrescope, was not different (p = 0.077). The median (IQR [range]) leak pressure was 16 (12-20 [6-30]) cmH2O for the polyvinyl LMA and 18 (13-22 [6-30]) cmH2O or the silicone LMA (p = 0.037). In conclusion, we did not find any important differences between polyvinyl chloride and silicone laryngeal mask airways. [ABSTRACT FROM AUTHOR]

Sevoflurane is a non-pungent volatile anaesthetic agent with a low blood-gas solubility coefficient. It has been studied in concentrations of up to 8% for induction of anaesthesia. Previous work has suggested that there may be a ceiling effect with increasing concentration of sevoflurane above 6%, but there are no published studies using 12% sevoflurane. This study compared 8 and 12% sevoflurane to induce anaesthesia in adults. Sevoflurane was administered using two adapted datum vaporisers with the interlock removed. Induction with 12% sevoflurane compared to 8% sevoflurane produced a significant decrease in the time to achieve central pupils, corresponding to surgical anaesthesia and the third part of Guedel's stage 3 of anaesthesia (mean time (SD) 201 s (81) and 247 s (39), respectively, p < 0.05). Twelve-percent sevoflurane produced a similar stable cardiovascular profile to 8% sevoflurane, and there was no increase in respiratory complications. [ABSTRACT FROM AUTHOR]

Summary We examined the use of the 30° rigid nasendoscope in aiding difficult tracheal intubations. A Cormack and Lehane grade 4 difficult intubation (no view of glottis or epiglottis) was set up on a manikin. After 10 s of tuition, 40 anaesthetists attempted to pass a standard gum elastic bougie between the cords, with and without the nasendoscope, in randomised order. A bougie curved to an ‘optimal curve’ was also tested. Using the standard bougie 13/40 (33%) passed the bougie between the cords without the nasendoscope, compared with 31/40 (78%) when using the nasendoscope (p < 0.001). The ‘optimal curve’ bougie resulted in 29/40 (73%) and 39/40 (98%) success rates without and with the nasendoscope, respectively (p = 0.004). The nasendoscope is a simple and easy to use tool in grade 4 intubation, and results are improved further by the use of an ‘optimal curve’ bougie. [ABSTRACT FROM AUTHOR]