Search

Hemp cultivation is living a period of renewed interest worldwide after long years of opposition and abandonment. The European Union (EU) allows and subsidizes the growing of fiber and oilseed cultivars of Cannabis sativa L. with respect to the THC content limit of 0.2%. The EU method for the quantitative determination of Δ9-tetrahydrocannabinol (THC) content in hemp varieties provides to apply a tolerance of 0.03 g of THC per 100 g of sample concerning compliance assessment to that limit. However, the method does not report any precision data, especially useful as a function of THC content to evaluate measurement uncertainty and therefore to establish the conformity of hemp at different THC legal limits. Measurement uncertainty of the method by both bottom-up and top-down approach, besides repeatability and reproducibility, was investigated and estimated in the THC concentration range 0.2–1.0%, which includes the different legal limits set out for hemp around the world. We proposed Decision Rules for conformity of hemp showing that a non-compliant declaration beyond reasonable doubt should be stated when the THC content, as a mean result on a duplicate analysis, exceeds the limit by at least 11–15%, depending on THC limit. We highlighted other issues concerning practical aspects of hemp analysis, from sampling to evaluation of results, as well as the need to carry out collaborative studies on the EU method. Graphical abstract

The development of methodologies for the characterization of silver nanoparticles (AgNPs) synthesized using natural products has received increasing attention, especially to monitoring its stability and size for further application. In this paper, a capillary electrophoretic (CE) method is presented for characterization of AgNPs synthesized using honey or glucose as reducing agents. A simple electrolyte solution composed of 20 mM sodium borate and 20 mM sodium dodecylsulfate (SDS) at pH 8.5 was used for separation of AgNPs within a short analysis time (

Conventional detection of toxic contaminants on surfaces, in food, and in the environment takes time. Current analytical approaches to chemical detection can be of limited utility due to long detection times, high costs, and the need for a laboratory and trained personnel. A non-specific but easy, rapid, and inexpensive screening test can be useful to quickly classify a specimen as toxic or non toxic, so prompt appropriate measures can be taken, exactly where required. The bioluminescent bacteria-based tests meet all these characteristics. Bioluminescence methods are extremely attractive because of their high sensitivity, speed, ease of implementation, and statistical significance. They are usually sensitive enough to detect the majority of pollutants toxic to humans and mammals. This tutorial provides practical guidelines for isolating, cultivating, and exploiting marine bioluminescent bacteria as a simple and versatile analytical tool. Although mostly applied for aqueous phase sample and organic extracts, the test can also be conducted directly on soil and sediment samples so as to reflect the true toxicity due to the bioavailability fraction. Because tests can be performed with freeze-dried cell preparations, they could make a major contribution to field screening activity. They can be easily conducted in a mobile environmental laboratory and may be adaptable to miniaturized field instruments and field test kits.

Specific and sensitive analyses tailored to reveal and monitor the wide variety of chemical contaminants polluting all environment compartments, feed, and finally foods are strongly required following the increasing attention to the environment and health protection. Our research group has been involved in monitoring activities on agrochemical presence and distribution based on beehive monitoring stations distributed throughout the area. Honeybees were employed both as biosensors concerning the pesticides affecting their viability and as “contaminant collectors” concerning all environmental pollutants. We focused our research on the development of analytical procedures able to reveal and quantify pesticides in different samples but with a special attention to the complex honeybee matrix. Specific extraction and purification procedures have been developed and some are still under optimization. The analytes of interest were determined by gas or liquid chromatographic methods and by compound-specific or group-specific immunoassays in the ELISA format, the analytical performance of which was improved by introducing a luminescent end-point detection. The range of developed chemiluminescent immunoassays was extended to include the determination of completely different pollutants such as explosives, volatile organic compounds including benzene, toluene, ethylbenzene, xylenes, and plastic components like Bisphenol A. An easier and portable format, a Lateral Flow Immuno Assay (LFIA) was added to the ELISA format to increase the application flexibility of these assays. The aspects of novelty, the specific characteristics, the analytical performance and possible future development of the different chromatographic and immunological methods are described and discussed.

A quantitative chemiluminescent method, enabling indirect identification of the peroxide-based explosives TATP (triacetone triperoxide) and HMTD (hexamethylene triperoxide diamine) has been developed. Treatment of these compounds with acidic solutions produced peroxides, which were transformed into radical derivatives by horseradish peroxidase (HRP) and then quantified by measuring the light emitted during their oxidation of luminol. The method was first developed in the microplate format and later optimized for a portable luminometer, to enable rapid application of the assay directly on site. When the portable luminometer was used each analysis took only 5-10 min. The method had good selectivity, sensitivity, and reproducibility; in the microplate format the limits of detection (LOD) and quantification (LOQ) were 40 and 50 ng mL(-1), respectively, for both TATP and HMTD. When the portable luminometer was used the LOD and LOQ were 50 and 100 ng mL(-1), respectively, for both compounds. Introduction of light emission-enhancing compounds did not improve the analytical performance of the assay. Imprecision (CV values) was always below 10%. Recovery varied rapidly with time, with an average value of 78% after 5 min. No false-positive result was detected on measurement of a variety of samples; this is an important feature for analysis on site. The method was applied both to contaminated materials and to fortified soil samples, simulating operational conditions.

To identify the explosive used in a terrorist attack, or to get an early sign of environmental pollution it is important to use simple and rapid assays able to detect analytes at low levels, possibly on-site. This is particular true for TNT (2,4,6-trinitrotoluene), one of the most employed explosives in the 20th century and at the same time, because its toxicity, a well known pollutant. In this work we describe the development of an indirect competitive ELISA with chemiluminescent detection (CL-ELISA) and of a lateral flow immunoassay (LFIA) based on colloidal gold nanoparticle labels. A commercially available monoclonal antibody was used and 13 specially synthesized conjugates were tested. We optimized the assay by determining the optimal concentration of monoclonal antibody and conjugates as well as the influence of various non specific parameters such as: the tolerance to organic solvents at different concentrations, the washing and competitive step time, and the cross-reactivity with related compounds. The CL-ELISA showed a good sensitivity (LOD and IC50 values in the ng mL-1 range) and a good reproducibility (CV value about 7%). It has been applied to real samples of various materials involved in a controlled explosion of an “Improvised Explosive Device”. Three extraction procedures have been tested on these samples, all employing methanol as the solvent. The Lateral Flow Immuno Assay (LFIA), developed by using the same immunoreagents, reached a Detection Limit of 1 µg mL-1 when tested on the same samples analysed by CL-ELISA.

The suitability of competitive enzyme-linked immunosorbent assays (ELISAs) with chemiluminescent detection-based immobilized antigen (indirect assay) for rapid and accurate determination of chlorpyrifos in various food matrices was tested. The limit of detection (LOD) values were 1–1.75 ng mL−1, the standard curve midpoint (IC50) was 3.5 ng mL−1, and the assay duration was 1.5 h. Assay application to the analysis of honeybee extract resulted in chlorpyrifos recoveries varying between 62 and 83% in 5–15 ng mL−1 herbicide concentration range.

An electrochemical immunosensor based on indirect competitive ELISA technique has been developed and tested for the detection of azinphos‐methyl in aqueous solutions and spiked honeybee extracts. The detection of the pesticide was based on competition for binding to monoclonal antibodies with an ovalbumin (OVA) conjugate, followed by the incubation with anti‐mouse IgG labeled with horseradish peroxidase, whose activity was measured amperometrically with hydroquinone as the substrate. The sensitivity of the azinphos‐methyl assay, estimated as the IC50 value, was found to be 1.2 nmol L−1 (60 min incubation), with a linear range of 0.6–500 nmol L−1 in optimal conditions. The matrix effect on the detection of azinphos‐methyl in honeybee extract was found negligible, with the recovery values in the range 92–105%.

This review deals with the applications of bioluminescent bacteria to the environmental analyses, published during the years 2000–2007. The ecotoxicological assessment, by bioassays, of the environmental risks and the luminescent approaches are reported. The review includes a brief introduction to the characteristics and applications of bioassays, a description of the characteristics and applications of natural bioluminescent bacteria (BLB), and a collection of the main applications to organic and inorganic pollutants. The light-emitting genetically modified bacteria applications, as well as the bioluminescent immobilized systems and biosensors are outlined. Considerations about commercially available BLB and BLB catalogues are also reported. Most of the environmental applications, here mentioned, of luminescent organisms are on wastewater, seawater, surface and ground water, tap water, soil and sediments, air. Comparison to other bioindicators and bioassay has been also made. Various tables have been inserted, to make easier to take a rapid glance at all possible references concerning the topic of specific interest.

A method based on matrix solid phase dispersion (MSPD) using C18 as dispersant and dichloromethane–methanol as eluent and liquid chromatography–atmospheric pressure chemical ionization–mass spectrometry (LC–APCI–MS) has been developed for the simultaneous determination of imidacloprid, 6-chloronicotinic acid, carbaryl, aldicarb, aldicarb sulfoxide, and aldicarb sulfone in honeybees. The proposed method was compared with liquid–liquid extraction (LLE) combined with LC–APCI–MS analysis. Spiked blank samples were used as standards to counteract the matrix effect observed in the chromatographic determination. Recovery studies were performed at different fortification levels. Average recoveries by MSPD varied from 61% of 6-chloronicotinic acid to 99% of aldicarb sulfoxide and relative standard deviations were equal or lower than 14%. Limit of detections ranged from 0.004 mg kg−1 for imidacloprid to 0.09 mg kg−1 for 6-chloronicotinic acid. Results obtained by both methods were compared, MSPD showed higher recoveries and sensitivity than LLE for most pesticides, except for carbaryl. As MSPD is easier to perform, faster, consumes less sample and organic solvents than LLE, its application for pesticide analysis in honeybees is suggested.

In the present work, enzyme-linked immunosorbent assays (ELISAs) with chemiluminescent detection for the determination of carbofuran, carbaryl and methiocarb were developed and the analytical parameters of these assays were compared with those of ELISAs with colorimetric detection. Both were conjugate-coated formats based on identical monoclonal antibodies and homologous protein conjugates. In comparison with colorimetric ELISA, the ability of the chemiluminescent reagents to detect lower concentrations of horseradish peroxidase allowed to decrease the optimal antibody and conjugate concentrations and to reach better analytical parameters. The experimental comparison of the analytical performance of the ELISAs was carried out by analysing extracts of apple-strawberry baby food and simply diluted fruit juices, both spiked at different concentration levels with the above mentioned pesticides. Recovery values for both ELISAs were around 100% and no matrix effects were observed when fruit juices were diluted 1:20 or more. Results obtained by ELISAs correlated well, both in terms of accuracy and precision, with those obtained by a liquid chromatography–electrospray mass spectrometry (LC/ESI/MS/MS) analysis, used as reference method to validate the immunoassays results. The limits of detection reached by using the chemiluminescent assay were 0.03, 0.007 and 0.004 ng ml −1 for carbofuran, carbaryl and methiocarb, respectively.

Imidacloprid is a new insecticide with a wide range of action. Because honeybees are very sensitive to this substance, two techniques (HPLC–UV and GC–MS) which enable its detection in several matrices of both animal and vegetable origin were used to monitor its possible presence in cultivated land. In the first method quantification of imidacloprid in honeybees was achieved by use of the external standard method; the detection limit was 50 mg kg−1, the linear range 0.05–1 mg mL−1, recovery 60–83%, and the imprecision (coefficient of variation) 8.6% for repeatability and 11.8% for reproducibility. Recovery from pollen was 71–98% in the range 0.05–0.5 mg kg−1. The repeatability was 9.2–13.9%. Imidacloprid can often be found in the environment, not as a simple molecule but as a group of degradation products. The GC–MS method could be used to quantify all these species as oxidation products and to determine the initial quantity of imidacloprid by use of a conversion factor. The liquid chromatographic analysis could be used to detect, in a standard solution, 10 ng mL−1 derivatized 6-chloronicotinic acid. The linearity was good (R=0.999) over a wide concentration range (10 μg mL−1–10 ng mL−1). Several samples with different matrices (filter paper placed on an pneumatic corn seed drill, grass, flowers, honeybees, etc.) obtained during the sowing period for imidacloprid-treated corn were analyzed. The quantification limit (LOQ) was 0.005 mg kg−1 for grass and flowers, 0.002 mg kg−1 for honeybees, and 0.024 mg kg−1 for paper filters.

The analytical performances of a manual and a partially automated chemiluminescent (CL) assay, of total antioxidant capacity (TAC) were assessed. In both cases the light emitting reaction involved luminol, horseradish peroxidase and hydrogen peroxyde, but the emission kinetics and the parameters taken into account to calculate TAC values were completely different. The major characteristics expressing the quality of the two analytical methods, i.e. inaccuracy, repeteability and reproducibility, sensitivity, time required for the analysis and detection limit, were estimated by using standard solutions of Trolox. The reliability of the automated method, in comparison with the more validated manual one, was demonstrated testing food samples such as honey, wine and dietary supplements and performing a statistical analysis of the results. The comparison of the two series of data by t-test resulted in p values in the range 0.1-0.01. The time required for the analysis of each sample was reduced to one third using the automated method.

A sensitive, rapid and simple bioluminescent (BL) assay using bioluminescent bacteria to detect the toxic activity of several chemicals is described. This assay is based on the measurement of inhibition of light production of a bioluminescent bacterial strain, isolated from seawater, in the presence of different toxins like heavy metals, organic chemicals, such as benzene, toluene, ethylbenzene, xylene (BTEX) and a wide range of pesticides in environmental samples. The improvement with respect to other commercial and non-commercial bioluminescent assays consists of the possibility to work at room temperature without the need to thermostat, thus allowing the use of simpler and low cost instruments, or to improve the assay using a microplate format, which makes it possible to analyse several samples also continuously for several hours. Using lyophilised bacteria, the assay is performed in less than an hour, without any bacterial cultivation, which makes the test suitable for rapid and sensitive evaluation of chemical pollutants in environmental samples.

All aerobic organisms have developed different mechanisms for neutralising the free radicals, mostly produced by the monoelectronic reduction of O(2), and preventing the severe damages these can provoke. The efficiency of these mechanisms can be assessed, in different matrices, by a simple and direct chemiluminescent assay (CL) based on luminol oxidation catalysed by horseradish peroxidase. Light emission is mediated by the production of free radicals and it is inhibited after a sample addition in a way that is directly proportional to the sample total content of molecules displaying antioxidant activity. The performances of this chemiluminescent assay were compared with those of two spectrophotometric methods already applied in clinical practice. First spectrophotometric method measures, like CL assay, the total antioxidant capacity, whereas the second one determines free thiol groups content. The chemiluminescent assay has a linearity interval between 0.60 and 9.46 mumol l(-1) of Trolox (y=34.91x+3.10; r=0.999; n=5) with an imprecision, expressed as CV, of 3.8% and an inaccuracy, expressed as percentage recovery, of 109%. The first spectrophotometric method, based on the same reference standard, the Trolox molecule, has a linearity interval between 0.2 and 2.5 mmol l(-1) of Trolox (y=-0.01x+4.54; r=0.95; n=5); the thiol groups assay has a linearity interval between 0.1 and 1 mmol l(-1) of l-cysteine (y=1.68x-47.09; r=0.998; n=5). Different clinical samples of plasma from healthy individuals, obese subjects and patients with liver diseases were tested. Interesting correlations were obtained among the three methods, but no significant correlations emerged between antioxidant capacity and clinical parameters. Significant differences were there only between men and women among obese subjects and between drinkers and non-drinkers among liver disease patients.

A heterogeneous chemiluminescent (CL) flow immunoassay for DDT was optimized comparing different types of immunoaffinity supports: beads, nylon coils and membranes (membranes HyBondN+). In order to characterize solid immunoaffinity supports two basic immunoassay formats were performed, using (1) enzyme-labeled secondary and (2) enzyme-labeled specific monoclonal antibodies (MAbs). In both formats, hapten DDT5 conjugated to ovalbumin immobilized on solid supports according to the appropriate immobilization procedure, enzyme label (horseradish peroxidase, HRP) and luminescent detection (luminol/H 2 O 2 / p -iodophenol) were used. The lowest limit of detection (LOD), 1 nM p , p -DDT, was obtained with a membrane-based flow immunoassay with HRP-labeled specific antibody. Beads and packed tubing were discarded as appropriate supports because of the difficulties encountered for reproducible packing and the occurrence of light scatterring (beads), which seriously compromised the performance and reproducibility of the flow immunoassay.

Two immunoassays, a Lateral Flow ImmunoAssay (LFIA) based on colloidal gold nanoparticle labels and an indirect competitive chemiluminescence enzyme-linked immunosorbent assay (CL-ELISA), were developed and a high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was optimized to assess the possible release of bisphenol A (BPA, 4,4¿-isopropylidenediphenol) from different plastic baby bottles treated with simulating solutions. Coating conjugate concentration, anti-BPA antibody dilution, incubation time of the primary and secondary antibodies, and tolerance to different organic solvents were optimized to obtain the best performance of the ELISA with chemiluminescent end-point detection. The influence of different buffers on LFIA performance was also evaluated. Both methods showed good repeatability (mean CV value around 13%) and sensitivity. Reproducibility tests for CL-ELISA gave a mean CV value of about 25%. The IC50 and Limit of Detection (LOD) values of CL-ELISA were 0.2 and 0.02 ng mL¿1, respectively. The LOD of LFIA was 0.1 ¿g mL¿1. A LC-MS/MS method was also optimized. The separation was performed in a C18 column with a triple-quadrupole mass spectrometer with electrospray ionisation interface. The method showed a good linearity in the range 2 to 500 ng mL¿1, with a regression coefficient of 0.998. In the simulating solutions the detection and quantification limits, calculated by the signal to noise level of 3 (S/N = 3), were 5.8 ng mL¿1 and 17.4 ng mL¿1, respectively. This limit of quantification was about 3 and 35 times lower than the permitted limits set by the official method CEN/TS 13130-13 (0.05 ¿g mL¿1) and by the Directive 2004/19/EC (0.6 ¿g mL¿1), respectively. The methods were applied to determine BPA release from baby bottles, performing repeated procedures according to EU and national regulations. The results demonstrated that no BPA migration from the tested plastic materials occurred with only one exception. The migrated amount, above the regulatory limits, was detected by all the mentioned assays, This work was supported by a grant from the University of Bologna (RFO-Focused Fundamental Research Projects 2000-2011) grants.

The analysis of several organophosphorus and carbamate pesticide residues in the bodies of honeybees using gas chromatography (GC) and gel permeation chromatography (GPC) clean-up is described. Freeze-dried or lyophilized insect samples were blended with diatomaceous earth (Extrelut) then underwent elution with methylene chloride. This extraction method has shown good recovery on various spike standard levels. Samples are cleaned up by GPC with a Bio Beads SX 3 column and a cyclohexane-ethylacetate (1:1) eluant. Organophosphorus and carbamate compounds are quantified using capillary gas chromatography. Good linearity ranges were observed for all compounds. The extraction process was rapid and results were good, despite the complexity of the matrix on which it was applied. It allowed a reduction both in cost and the consumption of solvents, thereby safeguarding the health of the analyst and the environment. Environmental monitoring using bees was confirmed to be a valid procedure.

A highly sensitive and rapid chemiluminescent assay for the determination of the activity of xanthine oxidase (XOD) was developed. The chemiluminescent signal was obtained from the catalyzed oxidation of hypoxanthine, accelerated and amplified using a Fe-EDTA complex and perborate, which acts on luminol. The same luminescent mixture was previously used as detection system for immunoassays. Two different mixtures were used, which differ in their luminol and perborate content, with (CLMrho) or without (CLMb) addition of 0.1 μM rhodamine fluorophor. The response obtained from XOD standard solutions in buffer was linear from 5 to 500 U L−1 and from 0.7 to 250 U L−1 for CLMrho and CLMb respectively, at 25°C. 5 and 0.7 U L−1 were the detection limits at 1 standard deviation level. The intra- and inter-assay relative standard deviations ranged from 6 to 12 % for both CLM. Measurements were made using the high performance, low-light level imaging Berthold luminograph LB-980 which allows simultaneous dete...

A new amperometric immunosensor for 2,4,6- trinitrotoluene based on the working principle of competitive enzyme-linked immunosorbent assay was developed and characterised. An electrodeposited nanogold substrate was functionalised by deposition of self-assembled monolayers of 2-aminoethanethiol as linkers for the subsequent immobilisation of polyamidoaminic dendrimers. Our approach makes use of those dendrimers to anchor a trinitrobenzene-ovalbumin conjugate on the electrode surface. The immunosensor was tested and validated for the determination of 2,4,6-trinitrotoluene showing high selectivity with respect to other nitroaromatic compounds, a limit of detection of 4.8 ng/mL and a limit of quantitation of 6 ng/mL. The immunosensor was tested for the quantification of the analyte in spiked soils and in a real sample of post-blast soil, evidencing a good recovery rate (113 %).

[EN] Simple, rapid and highly sensitive assays, possibly allowing on-site analysis, are required in the security and forensic fields or to obtain early signs of environmental pollution. Several bioanalytical methods and biosensors based on portable devices have been developed for this purpose. Among them, Lateral Flow ImmunoAssays (LFIAs) offer the advantages of rapidity and ease of use and, thanks to the high specificity of antigen-antibody binding, allow greatly simplifying and reducing sample pre-analytical treatments. However, LFIAs usually employ colloidal gold or latex beads as labels and they rely on the formation of colored bands visible by the naked eye. With this assay format, only qualitative or semi-quantitative information can be obtained and low sensitivity is achieved. Recently, the use of enzyme-catalyzed chemiluminescence detection in LFIA has been proposed to overcome these problems. In this work, we describe the development of a quantitative CL-LFIA assay for the detection of 2,4,6-trinitrotoluene (TNT) in real samples. Thanks to the use of a portable imaging device for CL signal measurement based on a thermoelectrically cooled CCD camera, the analysis could be performed directly on-field. A limit of detection of 0.2¿gmL -1 TNT was obtained, which is five times lower than that obtained with a previously described colloidal gold-based LFIA developed employing the same immunoreagents. The dynamic range of the assay extended up to 5¿gmL -1 TNT and recoveries ranging from 97% to 111% were obtained in the analysis of real samples (post blast residues obtained from controlled explosion). © 2012 Elsevier B.V., This work was supported by grants from the Italian Ministry of Instruction, University and Research (PRIN 2007AWK85F "Development of integrated analytical instruments based on luminescence principles for multiplexed analysis in POCT (Point-Of-Care Testing) applications" and PRIN 2006033429 "New Analytical Tools for Security and Criminal Investigations: Trace Detection and Identification of Explosives and Related Compounds") and from the University of Bologna ("Fundamental Oriented Research").

A chemiluminescence-based flow method for the determination of some organophorus and carbamate pesticides based on inhibition of acetylcholinesterase was developed. Acetylcholinesterase in solution or immobilized on methacrylate beads (Eupergit C) was coupled to choline oxidase and peroxidase immobilized on Eupergit C. In this system choline formed by acetylcholinesterase was oxidized by choline oxidase and the H2O2 produced was determined via the luminol/peroxidase luminescent reaction. The detection limits (3 σ) for Paraoxon and Aldicarb were 0.75 μg 1−1 and 4 μg 1−1, respectively, when soluble acetylcholinesterase was used under the following optimized experimental conditions: 56 μM luminol in working solution, sample volume 60 μl, flow-rate 0.3 ml min−1 and 60 min incubation time. The flow sensor device using all the three enzymes in the immobilized form had a higher detection limit of 125 μg 1−1 for Paraoxon. The mid-range relative standard deviation (n=10) using 1 mM standard substrate solution was 3.7%. The recovery from contaminated samples (soil, vegetables) varied from 81 to 108%. The results obtained by the developed methods were in good agreement with those obtained by a commonly used colorimetric test.

The analytical performance of a low-light imaging luminograph for quantitative luminescence analysis was evaluated in terms of sensitivity, spatial resolution, accuracy, precision, and sample geometry, at the macrolevel and in combination with optical microscopy. The system allows for the detection of 400 amol of enzymes such as alkaline phosphatase and horseradish peroxidase using 1,2-dioxetanes and luminol/p-iodophenol or acridancarboxylate esters, respectively, as chemiluminescent substrates. Enzymatic activity and spatial distribution of nylon net immobilized-alkaline phosphatase was studied; the system permits the quantification of the immobilized enzyme with a spatial resolution as low as 1 μm. Other applications, such as the alkaline phosphatase localization in 8 μm intestinal mucosa cryosections, quantitative immunocytochemistry, and dot blot DNA hybridization reactions, were studied and optimized. The system was also employed for in situ hybridization assay of cytomegalovirus DNA in infected human fibroblasts. The presence of a viral genome was revealed with digoxigenin-labeled probes and alkaline phosphatase-labeled anti-digoxigenin antibody, using chemiluminescent substrate for this enzyme. The luminescent signal was intense and stable, and the probe was imaged and quantified within single cells with higher intensity in the nuclei, with a spatial resolution as low as 1 μm and very low background. The results show that this technique is an ultrasensitive and potent analytical tool to localize and quantify biomolecules at microscopic level, and it is suitable for many bioanalytical applications.

The interaction between DNA and several newly synthesized derivatives of the natural anticancer compound luotonin A has been studied. The results from our work reveal an effective and selective alkaloid/double-stranded DNA (ds-DNA) interaction. In the presence of increasing amounts of ds-DNA, a noticeable fluorescence quenching of the luotonin A derivatives under study was observed. However, this effect did not take place when single-stranded DNA (ss-DNA) was employed. The association constant alkaloids/ds-DNA was calculated by quantitation of such a quenching effect. The influence of other quenchers, namely Co(2+) and Br(-) on the native fluorescence of luotonin A and derivatives was also studied, and a remarkable quenching effect was observed for both ions. We have also investigated how by binding DNA the alkaloids could get protected from the external Co(2+) and Br(-) quenchers. The Stern-Volmer constants (K (SV)) for Co(2+) and Br(-) quenching effect on the studied alkaloids were considerably reduced (10-50%) after incubation of the compounds in the presence of DNA with regard to the K (SV) values in absence of DNA. An increase in the fluorescence anisotropy values of luotonins was also produced only in the presence of ds-DNA but not in the case of ss-DNA. To better characterize the nature of that interaction, viscosimetry assays and ethidium bromide displacement studies were conducted. With regard to DNA reference solutions, the viscosity of solutions containing DNA and luotonin A derivatives was reduced or not significantly increased. It was also observed that the studied compounds were unable to displace the intercalating agent ethidium bromide. All of these results, together with the obtained association constants values (K (ass) = 2.2 × 10(2) - 1.3 × 10(3)), support that neither covalent nor intercalating interactions luotonin A derivatives/ds-DNA are produced, leading to the conclusion that these alkaloids bind ds-DNA through the minor groove. The specific changes in the fluorescence behavior of luotonin A and derivatives distinguishing between ss-DNA and ds-DNA binding, lead us to propose these compounds as attractive turn-off probes to detect DNA hybridization.

Bioremediation has proven successful in numerous applications to petroleum hydrocarbons or chlorinated aromatic hydrocarbons contaminated soils. There is increasing interest for application of biotoxicity tests for ecological assessment and for supporting management decisions for remediation. Luminescent assays, light-emitting bacteria in particular, can be a suitable tool for environmental analysis, and in vivo luminescence is a rapid and precise indicator of the toxic effects of xenobiotic on micro-organisms. In this study three different strains of marine bioluminescent bacteria have been employed to follow the changes in biotoxicity occurring during the laboratory scale bioremediation of water and soil samples contaminated by hydrocarbons and collected at an industrial area. The degradation was made by hydrocarbons degrading bacteria, both of commercial sources and isolated from polluted water and soils. The samples were treated for 45 days. The toxicity of the samples, before and after the bioremediation was determined directly on water samples or on the extracts of soil samples. The yield of extraction of different solvents (acetone, dioxane, ethanol, and dichloromethane) was evaluated by the bioluminescent test. The measurements were carried out using a microplate format both for short time of contact (60 minutes, acute toxicity) and for longer time intervals (24 hours, chronic toxicity). The results have been expressed as percentage of inhibition with respect to the blank emission (100% emission). Original and treated samples have been analysed by gas chromatography to assess the hydrocarbons (C>12 and Poly Chlorinated Biphenyls, PCB) content. The autochthonous bacteria isolated from polluted samples resulted less effective, due to the short time for selection, in remediation activity with respect to the commercial ones, but their capacity to degrade long chain hydrocarbons was satisfactory. The presented laboratory study can be applied also in case of on-field conditions.

A highly sensitive and rapid bioluminescent flow sensor was developed for the determination of the content of L-phenylalanine (Phe) in serum by monitoring the reduced form of nicotinamide adenine dinucleotide (NADH), produced by immobilized phenylalanine dehydrogenase (PheDH), with bacterial bioluminescent enzymes immobilized on a separate nylon coil. The L-PheDHs extracted from Bacillus badius, Bacillus sphaericus and Rhodococcus sp. M 4 were investigated and the performances of the three immobilized L-PheDH's were analysed. The B. badius reactor was found to give higher transformation rate and better sensitivity; the response was linear from 1 to 100 microM at 25 degrees , with a detection limit of 10 pmoles (0.5 microM). The intra- and inter-assay coefficients of variation were less than 5% and recoveries ranged from 90 to 101%. The results agreed well with those obtained with a chromatographic method for the Phe determination in serum and with the normal reference values.

A continuous-flow system was developed for the assay of magnesium(II) in serum, drugs and beverages, making use of firefly luciferase (LUC)(EC 1.13.12.7) or recombinant luciferase (r-LUC) from Escherichia coli immobilized on a nylon coil or a column of epoxy methacrylate (Eupergit) placed inside a luminometer. The flow was air segmented and 10 µl samples were analysed. The sample assay rate was 20 h–1 with no carryover. The optimum operational conditions were found to be 0.05 mmol l–1 luciferin and 0.3 mmol l–1 ATP (adenosine triphosphate) at a flow rate of 0.4 ml min–1. The detection limit of the assay was 0.05 mmol l–1 for an LUC—nylon coil and 0.01 mmol l–1 for an LUC-Eupergit column or an r-LUC—nylon coil and the response was linear from 0.05 to 6.7 and from 0.01 to 6.7 mmol l–1, respectively. Both the intra- and inter-assay relative standard deviations were lower than 7%. No interferences from ions present in the samples (Ca2+, Mn2+, Fe2+, Cu2+, Zn2+, Co2+) were found. Results obtained for serum by the present method were in good agreement with those given by spectrophotometry with Xylidyl Blue II and by atomic absorption spectrometry.

An indirect competitive chemiluminescence enzyme-linked immunosorbent assay (CL-ELISA) for the determination of benzene, toluene, ethylbenzene, and ortho-, meta-, para-xylenes (BTEX) in soil and water was developed. The assay was optimized concerning the coating conjugate concentration, anti-BTEX antiserum dilution, incubation time effect on primary and secondary antibody incubation, and temperature effect on the competitive step and tolerance to different organic solvents. The IC(50) and lower limit of the detection (LDD(90)) values were 4.6 and 0.5 microg mL(-1), respectively. While water samples could be analyzed directly, soil has to be extracted and diluted prior to immunochemical measurements. BTEX could be recovered from spiked soil with a yield higher than 60% using 5-min ultrasonication with methanol. Finally, the assay was applied to soil and water samples collected at a contaminated site in Italy, and was compared to GC-MS.

A Chemiluminescente Enzyme-Linked Immuno-Sorbent Assay (CL-ELISA) for determination and quantification of the fungicide imidacloprid in honeybees was developed in an indirect competitive format. The assay was optimized by determining: the optimal coating conjugate concentration and anti-imidacloprid antiserum dilution, the effect of the incubation time on the competitive step, the tolerance to organic solvents. The IC50 and the limit of detection (LOD) values were 14.8 ng mL-1 and 0.11 ng mL -1, respectively, similar to those of colorimetric ELISA with a calibration range of 0.1 – 2600 ng mL-1. Cross reactivity of some related compounds such as three imidacloprid metabolites, 6-chloro nicotinic acid, 5-hydroxy-imidacloprid and imidacloprid olefin and one other chloronicotinoid insecticide, acetamiprid were tested. The assay was then applied to honeybee extracts obtained by using the liquid-liquid extraction. The calibration curves in honeybee extracts from liquid-liquid procedure gave an IC50 of 23.7 ng mL-1 and a LOD 1.6 ng mL-1. The average recovery value from honeybee extracts spiked with 100 and 1000 ng mL-1 of imidacloprid were 73% and 76% respectively. Finally, the assay was applied to honeybee samples collected during monitoring activities in Italy. Finally, the assay was applied to honeybee samples collected during monitoring activities in Italy and was founded that only five of the 27 samples were positives, with low concentrations of imidacloprid ranging between 1.2 and 15.4 ng g-1.

The quantitation of the natural cytotoxic and anti-inflammatory alkaloid luotonin A and five recently synthesized derivatives is described, constituting the first report of a HPLC method for the analysis of these compounds in human serum samples. The conditions for the chromatographic separation were optimized and the method was validated for the analysis of these compounds in biological samples according to international guidelines. An RP-HPLC method with fluorimetric detection and a C(18) stationary phase was applied. Different ACN/water mobile phases were assayed, including 0-4% of a mobile phase modifier such as tetrahydrofuran, dioxane or tert-butyl methyl ether. Isocratic and gradient elution conditions are compared. The influence of pH on the efficiency and resolution of the separation was also considered. The developed method was applied to the determination of luotonins in pooled human serum samples by gradient elution RP-HPLC using a simple cleanup procedure. The proposed chromatographic method exhibits satisfactory analytical figures of merit, with LOD from 1.0 x 10(-10) to 2.0 x 10(-10) M, intraday and interday precision below 6% except for the concentration level closest to LOD, and good agreement between experimental and theoretical concentrations. Therefore, the developed method is suitable, reliable, rapid, and simple.

A highly sensitive and rapid bioluminescent flow sensor was developed for the determination of the content of L-Glutamate (Glu) in serum and stock cubes by monitoring the reduced form of nicotinamide adenine dinucleotide (NADH), produced by immobilized glutamate dehydrogenase (GluDH), with bacterial bioluminescent enzymes immobilized on a separate nylon coil. The response was linear from 50 to 1000 μmol l−1 at 25 °C for the GluDH reactor. The intra- and inter-assay relative standard deviations were less than 7 % and recoveries ranged from 88 to 105 %. The results agreed well with those obtained with a spectrophotometry method for stock cubes and with a chromatographic method for the determination in serum.

Involvement of coenzyme Q (CoQ) in anti-oxidant activities, in addition to its major redox role, has frequently been suggested in recent years. In order to elucidate if CoQ could really be engaged in scavenging free radicals produced endogenously in a biological system, an experimental system was developed in which beef heart mitochondria in the presence of a saturating NADH concentration and of rotenone produce free radicals. The presence of oxygen-reactive forms was easily detected by a luminol-dependent chemiluminescence process. The chemiluminescence assay showed that short-chain CoQ homologues can act as pro-oxidants, enhancing free radical effects, while exogenous coenzyme Q 10 could scavenge free radicals, especially at very low concentration. In this system, exogenous CoQ 10 was more effective than α-tocopherol at the same concentration in scavenging free radicals. The molecular mechanism that leads to this ability is still nuclear, but these results are of biochemical and biomedical importance because they indicate that CoQ may act as an anti-oxidant in situations mimicking physiopathological conditions. This direct chemiluminescent method is promising for studies of biochemical processes which involve active oxygen species.

Previously, a bioluminescent flow sensor was developed for the determination of the content of l -lactate in biological fluids (serum, plasma, ventricular fluid) by monitoring the reduced form of nicotinamide adenine dinucleotide (NADH), produced by immobilized lactate dehydrogenase (LDH), with bacterial bioluminescent enzymes immobilized on a separate nylon coil. Based on a similar scheme, a sensor has now been developed for d -(−)-lactate. The co-immobilization of alanine aminotransferase (ALT) with d -LDH improved the lactate transformation to 40–60%. The response was linear from 1 to 100 μmol 1 −1 at 25 °C for the LDH-ALT reactor. The intra- and inter-assay relative standard deviations were less than 75% and the recoveries ranged from 93 to 106%. The results agreed well with those obtained with a spectrophotometric method and applications to d -(−)-lactate determination in serum, milk and microorganism extracts are reported together with those for l -(+)-lactate.

International audience; A Chemiluminescence Enzyme-Linked Immuno-Sorbent Assay (CL-ELISA) for determination and quantification of the fungicide thiram in honeybees was developed in an indirect competitive format. The assay was optimized by determining: the optimal coating conjugate concentration and anti-thiram antiserum dilution, the effect of the incubation time on the competitive step, the tolerance to organic solvents. The IC50 and the limit of detection (LOD) values were 60 ng mL-1 and 9 ng mL -1, respectively, similar to those of colorimetric ELISA with a calibration range of 9 – 15,000 ng mL-1. Cross reactivity of some related compounds such as some dithiocarbamates, a thiocarbamate, the ethylenethiourea and the tetramethylthiourea were tested. The assay was then applied to honeybees sample extracts obtained by using the liquid-liquid extraction or the graphitized carbon-based solid phase extraction. The calibration curves in honeybee extracts from liquid-liquid procedure gave an IC50 of 141 ng mL-1 and a LOD of 17 ng mL-1. In case of extracts obtained by SPE these values were 139 ng mL-1 and 15 ng mL-1, respectively. The average recovery value from honeybee extracts spiked with 75 ng mL-1 of thiram was 72% for SPE, higher than for liquid-liquid extraction (60%). On the opposite, when the honeybees were directly spiked with 2 and 10 ppm the average recovery was higher for liquid-liquid extraction (54%), than for SPE (31%). Finally, the assay was applied to honeybee samples collected during monitoring activities in Italy and Russia.

Cling films are prepared by adding (5–30% w/w) adipates, citrates, and phthalates. The adverse effects on human health of the plasticizers have been demonstrated, and then their content in food contact plastics and possible migration to foodstuffs must be carefully checked. To offer an easier tool to perform these controls, a Soxhlet extraction by ethyl acetate and a multi residue chromatography analysis, with Flame Ionization Detector, have been optimised for the application in evaluating both the real content of plasticizers in films and freezing bags, and their migrated amounts in simulants. The average extraction yield was 95 ± 10%. The chromatographic analysis was able to determine 16 different compounds, clearly separated, taking only 25 min to complete the assay. The detection limits ranged from 0.07 to 0.7% (w/w). The total amount of plasticizers in the packaging products was comprised between 3 and 10% (w/w). Extracted and migrated amounts were compared, and they resulted in good agreement. No migration of Phthalates, whose presence has been demonstrated in some samples, has been observed. It has been also demonstrated that a prolonged contact (till 60 days) did not increase the amount of migrated plasticizers, and then the risks for health.

The determination of imidacloprid and its main metabolite (6-chloronicotinic acid) in honeybees was performed by liquid chromatography with post-column photochemical derivatisation in alkaline medium and fluorescence detection. The compounds were extracted from honeybees with acetone under ultrasound conditions prior to liquid-liquid partition with dichloromethane. The separation of extract components was performed using a 50 mm x 4.6 mm i.d. short column packed with 5 microm Aquasil C(18) using an acetonitrile:water gradient program as mobile phase. Injection of samples in 0.1 mol L(-1) H(3)PO(4)/KH(2)PO(4) buffer solution (pH 3) improved the chromatographic separation between the most polar components of matrix and the 6-chloronicotinic acid. Matrix components were removed to waste using an on-line clean-up method previously to post-column reaction. Limits of quantification were 0.3 and 5.0 microg L(-1) (corresponding to 1.2 and 20.0 microg kg(-1) in the honeybee sample) for imidacloprid and 6-chloronicotinic acid, respectively. The recovery was ranged from 80.2 to 91.7% with a relative standard deviation lower than 9.0%.

Total antioxidant capacity was measured in red wine samples by two analytical methods: chemiluminescent (CL) assay based on the luminol/peroxidase system and a spectrophotometric (SP) method based on the use of crocin. The imprecision, expressed as coefficient of variation (CV) for each method, was similar (1.2%), whereas the detection limit (LOD) was 35 and 0.3 µmol of Trolox for SP and CL methods, respectively. In addition, the chemiluminescent method has the advantage of being simple, rapid, sensitive and inexpensive. Different samples of red wine were analysed and both methods showed that the antioxidant capacity is related to the total polyphenol content and varies over time depending on storage conditions.

Pesticides applied in extended agricultural fields may be controlled by means of bioindicators, such as honeybees, in which are the pesticides bioaccumulate. Liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry (LC-APCI-MS) experiments with positive (PI) and negative (NI) ion modes were optimized for the analysis of 22 organophosphorus pesticides in honeybee samples. The extraction required 3 g of sample, which was extracted with acetone. The extract was purified with coagulating solution and reextracted with Cl(2)CH(2). Pesticides studied could be detected by both ionization modes except for parathion, parathion-methyl, and bromophos, which did not give signals in PI mode, and triazophos, which was not detected in NI mode. Fragmentation voltage and vaporizer temperature were optimized to achieve the highest sensitivity. The spectra profile of each pesticide in PI mode showed the [M + H](+) ion as the main signal, whereas in NI mode only fragment ions were shown. The detection limit obtained in selected ion monitoring mode ranged from 1 to 15 microg kg(-1). The average recoveries from spiked honeybees at various concentration levels (0.5-5 mg kg(-1)) exceeded 65% with relative standard deviations of 4-15%. The method was applied to real samples, in which residues of coumaphos and dimethoate were detected.

A method based on solid-phase microextraction (SPME) followed by gas chromatography with nitrogen-phosphorus detection was developed for the purpose of determining 18 organophosphorus pesticide residues in honeybee samples (Apis mellifera). The extraction capacities of polyacrylate and poly(dimethylsiloxane) fibers were compared. The main factors affecting the SPME process, such as the absorption time profile, salt, and temperature, were optimized. The method involved honeybee sample homogenization, elution with an acetone:water solution (1:1) and dilution in water prior to fiber extraction. Moreover, the matrix effect on the extraction was evaluated. In samples spiked at the 0.2 mg kg(-1) level, the coefficient variation was between 1 and 13% and the detection limits were below 10 microg kg(-1). The SPME procedure was found to be quicker and more cost-effective than the solvent extraction method commonly used. The method was applied successfully to environmental screening. Parathion methyl was detected and confirmed in the real samples analyzed.

A highly rapid chemiluminescent assay for the determination of superoxide dismutase (SOD) activity in erythrocytes was developed. The inhibition of the luminescent emission caused by the decrease of generated superoxide anions was measured. The aim of this work was to verify the application of a non amplified luminol SOD luminescent assay (CLM) in erythrocytes starting from an amplified method already used for the determination of XOD activity in milk (CLME). Both the assays had a detection limit of 3 10 2 9 7 10 3 U:ml of SOD at 2s level, and a linear range of activity from 5.2 to 0.03 U:ml of SOD. The imprecision of assays (repeatability) presented coefficients of variations ranging from 3.1 to 7.9% for the CLME method and from 0.6 to 17.7% for CLM method. Both luminescent techniques were compared using a spectrophotometric kit, that had a detection limit of 0.3 U:ml, and showed good agreement. © 2000 Elsevier Science B.V. All rights reserved.

A direct chemiluminescent dot blot hybridization assay for the detection of B19 Parvovirus DNA is described. The hybridization test uses digoxigenin-labelled probes which are immunoenzymatically revealed by anti-digoxigenin Fab fragments conjugated with alkaline phosphatase (AP) or with horseradish peroxidase (HRP). The chemiluminescent signal, obtained from an enzyme-triggerable dioxetane for Ap or from the luminol-amplified reaction for HRP, is directly measured by placing the spot cut from the nylon solid support in a cuvette and inserting it into a luminometer. Both the enzymatic systems using this direct chemiluminescent detection gave reproducible results for calibration graphs and positive clinical samples, with higher reproducibility and long lifetime emission (15 days) for the AP-dioxetane system. This direct method allowed up to 0.2 pg of homologous target DNA to be revealed. The results obtained with the quantitative chemiluminescent assay described were compared with those obtained in a hybridization assay with colorimetric detection or photographic chemiluminescent detection and good agreement among the tests was found.

The amount of L-lactate in biological fluids (serum, plasma and cerebrospinal fluid) was determined by monitoring the reduced form of nicotinamide adenine dinucleotide (NADH) produced by immobilised lactate dehydrogenase (LDH), with bacterial bioluminescent enzymes immobilised on a separate nylon coil. The LDH catalysed the reaction of L-lactate with NAD; this reaction took place in a nylon coil that preceded the coil for the bioluminescent detection. The co-immobilisation of alanine aminotransferase (ALT) with LDH improved the lactate transformation by 117-183%. The response was linear from 0.1 to 50 micron mol l(-1) at 25 degrees C for the LDH - ALT reactor. The intra- and inter-assay coefficients of variation were less than 5% and the recoveries ranged from 93 to 106%. The results agreed well with those obtained with a spectrophotometric method and with the normal reference values.

A bioluminescent flow sensor was developed for the assay of creatine kinase (CK) using firefly luciferase immobilized on a nylon coil. The CK-catalysed reaction of creatine phosphate with ADP took place in a cuvette before the injection into the bioluminescent detector coil. The response was linear from 0.1 to 100 U l − at 25°C. An advantage of the flow sensor is a detection limit of less than 0.1 U l −1 , which, together with a high precision, allows determination of the CK activity in blood sera in about 5 min. The intra- and inter-assay reproducibilities (RSD) were less than 10% and the recovery range was 86–110%. The results agreed well with those obtained with a spectrophotometric method and with the normal reference values.

A continuous-flow system, based on NAD(P)H:FMN oxidoreductase and bacterial luciferase co-immobilized on a nylon coil placed in front of a photomultiplier, and alcohol dehydrogenase separately immobilized on a second nylon coil, is described for the assay of ethanol in serum and saliva. The flow is air-segmented and 5–50-μl samples are required. The sample throughput is 25–30 h −1 with no carryover. The detection limit is 1 μmol l −1 ethanol (50 pmol injected) and the response is linear between 50 and 2500 pmol of ethanol. The relative standard deviation is 3–10% for both within-day and between-day assays, and serum and saliva can be analyzed directly. The immobilized enzymes are satisfactorily stable and up to 900 samples can be analyzed with one enzyme reactor.

A continuous-flow bioluminescence method for determinations of branched-chain l -amino acids in serum and urine is described. Serum can be analyzed directly after simple filtration. Response is linear for 20-2000 pmol in the biological matrix. Leucine dehydrogenase is immobilized onto a nylon coil separated from the reactor coil containing bacterial bioluminescence enzymes. The stability of the immobilized is high (lifetime > two months) and more than 900 samples can be analyzed with the use of a few mg of enzymes. The results obtained agree well with those obtained by ion-exchange chromatography (amino acid analyzer).

A continuous flow bioluminescent method for NADH analysis has been developed using nylon 6 as a solid support. Bacterial luciferase and NAD:FMN oxidoreductase are covalently co-immobilized to a nylon coil (1 m × 1.0 mm ID). The reactor (nylon coil) is placed in front of a photomultiplier tube inside a luminometer linked to an air segmented continuous flow system. Response is linear from 1 to 2500 pmol/tube allowing determination of NADH at picomolar levels. Inter and intra assay precision of the method is satisfactory (5-10%). Range of sample volume injected is 5-100 μl. More than 20 samples per hour can be analyzed and no carryover was observed. The stability of the nylon immobilized enzymes is high (over 2 months) and over 500 samples can be analyzed with a few mg of enzymes.

A HPLC assay method for the quantitation of indole-3-acetic acid in vegetable extracts is described, using fluorescence detection. The method, which is based on extraction in the presence of poly(vinylpyrrolidone), preliminary cleanup of the extract using Sep Pak C18, and separation on a silica column, has been optimized for the determination of IAA in grape berries. The procedure described is determined to be accurate, sensitive, and reliable over time. The detection limit for IAA is about 0.1 ng.

The development of an enzyme-labelled immunoassay (EIA) of sufficient range and sensitivity for determination of plasma and salivary steroids is described. The method is based on competition in the solid phase. A fixed amount of a specific antibody is immobilized on polystyrene beads, its amount being enough to bind about 50% of a steroid-enzyme conjugate (covalently linked steroid Jhorseradish peroxidase conjugate). The initial incubation at 25 degrees of serum sample or extract with the conjugate in presence of the immobilized antibody is followed by washing and the addition of a substrate for measurement of the enzyme activity either colorimetrically by the H(2)O(2)/o-phenylenediamine method or by the luminescence reaction based on the use of H(2)O(2)/luminol. The method is precise and accurate (CV10% for both the intra- and inter-assay studies). The sensitivity of the colorimetric determination is similar to that of radioimmunoassay, but the luminescence method is more sensitive. Radioimmunoassay and EIA gave results in good agreement (r0.97). The method has also been applied to salivary steroids: the procedure is direct and only a few mu1 of saliva are required. The levels of these steroids in saliva are only about a tenth of those in serum but directly correlated with them (r0.85). The enzyme immunoassay proposed is sensitive and precise enough to measure these steroids accurately in saliva and plasma.

A continuous flow bioluminescent method for L-alanine analysis in serum and urine has been developed. Serum can be analyzed directly after simple filtration. Response is linear from 50 to 1500 pmoles in biological matrix. Alanine dehydrogenase is immobilized onto a nylon coil separated from the reactor coil containing bioluminescent enzymes. The stability of nylon immobilized enzymes is high (over three months) and more than 900 samples can be analyzed with few mg of enzymes. The results obtained with the bioluminescent sensor agree well with those obtained by ion exchange chromatography (amino acid analyzer).