Search

Engineered feature extraction can compromise the ability of Atrial Fibrillation (AFib) detection algorithms to deliver near real-time results. Autoencoders (AEs) can be used as an automatic feature extraction tool, tailoring the resulting features to a specific classification task. By coupling an encoder to a classifier, it is possible to reduce the dimension of the Electrocardiogram (ECG) heartbeat waveforms and classify them. In this work we show that morphological features extracted using a Sparse AE are sufficient to distinguish AFib from Normal Sinus Rhythm (NSR) beats. In addition to the morphological features, rhythm information was included in the model using a proposed short-term feature called Local Change of Successive Differences (LCSD). Using single-lead ECG recordings from two referenced public databases, and with features from the AE, the model was able to achieve an F1-score of 88.8%. These results show that morphological features appear to be a distinct and sufficient factor for detecting AFib in ECG recordings, especially when designed for patient-specific applications. This is an advantage over state-of-the-art algorithms that need longer acquisition times to extract engineered rhythm features, which also requires careful preprocessing steps. To the best of our knowledge, this is the first work that presents a near real-time morphological approach for AFib detection under naturalistic ECG acquisition with a mobile device.

Biometric identification systems are a fundamental building block of modern security. However, conventional biometric methods cannot easily cope with their intrinsic security liabilities, as they can be affected by environmental factors, can be easily “fooled” by artificial replicas, among other caveats. This has lead researchers to explore other modalities, in particular based on physiological signals. Electrocardiography (ECG) has seen a growing interest, and many ECG-enabled security identification devices have been proposed in recent years, as electrocardiography signals are, in particular, a very appealing solution for today’s demanding security systems—mainly due to the intrinsic aliveness detection advantages. These Electrocardiography (ECG)-enabled devices often need to meet small size, low throughput, and power constraints (e.g., battery-powered), thus needing to be both resource and energy-efficient. However, to date little attention has been given to the computational performance, in particular targeting the deployment with edge processing in limited resource devices. As such, this work proposes an implementation of an Artificial Intelligence (AI)-enabled ECG-based identification embedded system, composed of a RISC-V based System-on-a-Chip (SoC). A Binary Convolutional Neural Network (BCNN) was implemented in our SoC’s hardware accelerator that, when compared to a software implementation of a conventional, non-binarized, Convolutional Neural Network (CNN) version of our network, achieves a 176,270× speedup, arguably outperforming all the current state-of-the-art CNN-based ECG identification methods.

When long-term biosignal monitoring is required via surface electrodes, the use of conventional silver/silver chloride (Ag/AgCl) gelled electrodes may not be the best solution, as the gel in the electrodes tends to dry out over time. In this work, the electrical behaviour and performance of dry electrodes for biopotential monitoring was assessed. Three materials were investigated and compared against the gold-standard Ag/AgCl gelled electrodes. To characterize their electrical behaviour, the impedance response over the frequency was evaluated, as well as its signal to noise ratio. The electrodes’ performance was evaluated by integrating them in a proven electrocardiogram (ECG) acquisition setup where an ECG signal was acquired simultaneously with a set of dry electrodes and a set of standard Ag/AgCl gelled electrodes as reference. The obtained results were morphologically compared using the Normalised Root Mean Squared Error (nRMSE) and the Cosine Similarity (CS). The findings of this work suggest that the use of dry electrodes for biopotential monitoring is a suitable replacement for the conventional Ag/AgCl gelled electrodes. The signal obtained with dry electrodes is comparable to the one obtained with the gold standard, with the advantage that these do not require the use of gel and can be easily integrated into fabric to facilitate their use in long-term monitoring scenarios.

In recent years, employment in sedentary occupations has continuously risen. Office workers are more prone to prolonged static sitting, spending 65–80% of work hours sitting, increasing risks for multiple health problems, including cardiovascular diseases and musculoskeletal disorders. These adverse health effects lead to decreased productivity, increased absenteeism and health care costs. However, lack of regulation targeting these issues has oftentimes left them unattended. This article proposes a smart chair system, with posture and electrocardiography (ECG) monitoring modules, using an “invisible” sensing approach, to optimize working conditions, without hindering everyday tasks. For posture classification, machine learning models were trained and tested with datasets composed by center of mass coordinates in the seat plane, computed from the weight measured by load cells fixed under the seat. Models were trained and evaluated in the classification of five and seven sitting positions, achieving high accuracy results for all five-class models (>97.4%), and good results for some seven-class models, particularly the best performing k-NN model (87.5%). For ECG monitoring, signals were acquired at the armrests covered with conductive nappa, connected to a single-lead sensor. Following signal filtering and segmentation, several outlier detection methods were applied to remove extremely noisy segments with mislabeled R-peaks, but only DBSCAN showed satisfactory results for the ECG segmentation performance (88.21%) and accuracy (90.50%).

Wearable devices have been shown to play an important role in disease prevention and health management, through the multimodal acquisition of peripheral biosignals. However, many of these wearables are exposed, limiting their long-term acceptability by some user groups. To overcome this, a wearable smart sock integrating a PPG sensor and an EDA sensor with textile electrodes was developed. Using the smart sock, EDA and PPG measurements at the foot/ankle were performed in test populations of 19 and 15 subjects, respectively. Both measurements were validated by simultaneously recording the same signals with a standard device at the hand. For the EDA measurements, Pearson correlations of up to 0.95 were obtained for the SCL component, and a mean consensus of 69% for peaks detected in the two locations was obtained. As for the PPG measurements, after fine-tuning the automatic detection of systolic peaks, the index finger and ankle, accuracies of 99.46% and 87.85% were obtained, respectively. Moreover, an HR estimation error of 17.40±14.80 Beats-Per-Minute (BPM) was obtained. Overall, the results support the feasibility of this wearable form factor for unobtrusive EDA and PPG monitoring.

This article proposes a new method of identity recognition in sanitary facilities based on electrocardiography (ECG) signals. Our team previously proposed a novel approach of invisible ECG at the thighs using polymeric electrodes, leading to the creation of a proof-of-concept system integrated into a toilet seat. In this work, a biometrics pipeline was devised, which tested four different classifiers, varying the population from 2 to 17 subjects and simulating a residential environment. However, for this approach to be industrially viable, further optimization is required, particularly regarding electrode materials that are compatible with industrial processes. As such, we also explore the use of a conductive silicone material as electrodes, aiming at the industrial-scale production of a toilet seat capable of recording ECG data, without the need for body-worn devices. A desirable aspect when using such a system is matching the recorded data with the monitored user, ideally using a minimal sensor set, further reinforcing the relevance of user identification through ECG signals collected at the thighs. Our approach was evaluated against a reference device for a population of 17 healthy and pathological individuals, covering a wide age range (24–70 years). With the silicone composite, we were able to acquire signals in 100% of the sessions, with a mean heart rate deviation between a reference system and our experimental device of 2.82 ± 1.99 beats per minute (BPM). In terms of ECG waveform morphology, the best cases showed a Pearson correlation coefficient of 0.91 ± 0.06. For biometric detection, the best classifier was the Binary Convolutional Neural Network (BCNN), with an accuracy of 100% for a population of up to four individuals.