Search

Despite that the currently discovered CRISPR-Cas12a system is beneficial for improving the detection accuracy and design flexibility of luminescent biosensors, there are still challenges to extend target species and strengthen adaptability in complicated biological media. To conquer these obstacles, we present here some useful strategies. For the former, the limitation to nucleic acids assay is broken through by introducing a simple functional DNA regulation pathway to activate the unique trans-cleavage effect of this CRISPR system, under which the expected biosensors are capable of effectively transducing a protein (employing dual aptamers) and a metal ion (employing DNAzyme). For the latter, a time-gated luminescence resonance energy transfer imaging manner using a long-persistent nanophosphor as the energy donor is performed to completely eliminate the background interference and a nature-inspired biomimetic periodic chip constructed by photonic crystals is further combined to enhance the persistent luminescence. In line with the above efforts, the improved CRISPR-Cas12a luminescent biosensor not only exhibits a sound analysis performance toward the model targets (carcinoembryonic antigen and Na+) but also owns a strong anti-interference feature to actualize accurate sensing in human plasma samples, offering a new and applicative analytical tool for laboratory medicine.

Microtubules (MTs) are the main component of cytoskeletons, providing long tracks for cargo trafficking across the cytoplasm. In the past years, transport along MTs was frequently reported to be rapid directed motions with speeds of several micrometers per second, but is that all the truth? Using single-particle tracking, we roundly and precisely analyzed the dynamic behaviors of three kinds of cargoes transported along MTs in two types of cells. It was found that during the transport processes, the directed motions of the cargoes were frequently interrupted by nondirected motions which greatly reduced the translocation rate toward the nucleus. What is more, in addition to the widely reported rapid directed motions, a type of directed motions with most speeds below 0.5 μm/s occurred more frequently. On the whole, these slow directed motions took longer than the rapid directed motions and resulted in displacements same as those of the rapid ones. To sum up, while travelling along MTs toward the cell interior, endocytosed cargoes moved alternately in rapid-directed, slow-directed and nondirected modes. In this process, the rapid- and the slow-directed motions contributed almost equally to the cargoes' translocation. This work provides original insights into the transport on MTs, facilitating a more comprehensive understanding of intracellular trafficking.

The early diagnosis and timely intervention of viral myocarditis urgently require a noninvasive detection approach. Therefore, we present a CRISPR/Cas12a-powered biosensor that integrates an exceptionally efficient upconversion luminescent resonance energy transfer (LRET) with a nature-inspired biochip to determine a golden-standard cardiac biomarker (cardiac troponin I). First, a unique sandwich-structured energy-confined upconversion nanoparticle (acting as the energy donor) is synthesized to dramatically reinforce the LRET's ability. Such a structural improvement endows a relatively high quenching efficiency (as much as 93.8%) toward the surface acceptors and enhances the working adaption in complicated biological media. Moreover, a three-dimensional photonic crystal fabricated using a self-assembly of nanospheres is employed to construct a biochip interface, under which the upconversion luminescence is prominently boosted to approximately 27-fold to achieve signal amplification. Finally, the newly developed luminescence sensing method exhibits remarkable assay performance after introducing these attempts into a dual-aptamer-regulated CRISPR/Cas12a system to transduce the target. More importantly, this biosensor can primarily be a quite useful tracer tool to allow dynamic monitoring of the entire myocardial injury process in a coxsackievirus B3 infected mouse model, paving an attractive venue for medical diagnostic techniques.

We demonstrate an effective approach to realize active and real-time temperature monitoring around the gold nanobipyramids (AuNBPs)-labeled cancer cell under 808 nm laser irradiation by combining optical tweezers and temperature-sensitive upconversion microparticles (UCMPs). On the one hand, the aptamer-modified AuNBPs that absorb laser at 808 nm not only act as an excellent photothermal reagent but also accurately and specifically bind the target cancer cells. On the other hand, the single optically trapped NaYF4:Yb3+, Er3+ UCMPs with a 980 nm laser exhibit temperature-dependent luminescence properties, where the intensity ratio of emission 525 and 547 nm varies with the ambient temperature. Therefore, real-time temperature variation monitoring is performed by 3D manipulation of the trapped single UCMP to control its distance from the AuNBPs-labeled cancer cell while being photothermally killed. The results show distance-related thermal propagation because the temperature increase reaches as high as 10 °C at a distance of 5 μm from the cell, whereas the temperature difference drops rapidly to 5 °C when this distance increases to 15 μm. This approach shows that the photothermal conversion from AuNBPs is sufficient to kill the cancer cells, and the temperature increase can be controlled within the micrometer level at a certain period of time. Overall, we present a micrometer-size thermometer platform and provide an innovative strategy to measure temperature at the micrometer level during photothermal killing of cancer cells.

Herein, a conceptual approach for significantly enhancing a bead-supported assay is proposed. For the fluorescence imaging technology, optical tweezers are introduced to overcome the fluid viscosity interference and immobilize a single tested bead at the laser focus to guarantee a fairly precise imaging condition. For the selection of fluorescent materials and the signal acquisition means, a type of innovative luminescence confined upconversion nanoparticle with a unique sandwich structure is specially designed to act as an efficient energy donor to trigger the luminescent resonance energy transfer (LRET) process. By further combining the double breakthrough with a molecular beacon model, the newly developed detection strategy allows for achieving a pretty high LRET ratio (≈ 88%) to FAM molecules and offering sound assay performance toward miRNA analysis with a detection limit as low as the sub-fM level, and is capable of well identifying single-base mismatching. Besides, this approach not only is able to accurately qualify the low-abundance targets from as few as 30 cancer cells but also can be employed as a valid cancer early warning tool for performing liquid biopsy.

To enhance signal acquisition stability and diminish background interference for conventional flow bead-based fluorescence detection methods, we demonstrate here an exceptional microfluidic chip assisted platform by integrating near-infrared optical tweezers with upconversion luminescence encoding. For the former, a single 980 nm laser is employed to perform optical trapping and concurrently excite upconversion luminescence, avoiding the fluctuation of the signals and the complexity of the apparatus. By virtue of the favorable optical properties of upconversion nanoparticles (UCNPs), the latter is carried out by employing two-color UCNPs (Er-UCNPs and Tm-UCNPs) with negligible spectral overlaps. With the assistance of the double key techniques, we fabricated complex microbeads referred to a UCNPs-miRNAs-microbead sandwich construct by a one-step nucleic acid hybridization process and then obtained uniform terrace peaks for the automatic and simultaneous quantitative determination of miRNA-205 and miRNA-21 sequences with a detection limit of pM level on the basis of a special home-built flow bead platform. Furthermore, the technique was successfully applied for analyzing complex biological samples such as cell lysates and human tissue lysates, holding certain potential for disease diagnosis. In addition, it is expected that the flow platform can be utilized to investigate many other biomolecules of single cells and to allow analysis of particle heterogeneity in biological fluid by means of optical tweezers.

Establishment of a stable analytical methodology with high-quality results is an urgent need for screening cancer biomarkers in early diagnosis of cancer. In this study, we incorporate holographic optical tweezers with upconversion luminescence encoding to design an imageable suspension array and apply it to conduct the detection of two liver cancer related biomarkers, carcinoembryonic antigen and alpha fetal protein. This bead-based assay is actualized by forming a bead array with holographic optical tweezers and synchronously exciting the upconversion luminescence of corresponding trapped complex beads fabricated with a simple one-step sandwich immunological recognition. Owing to the fact that these flowing beads are stably trapped in the focal plane of the objective lens which tightly converges the array of the laser beams by splitting a 980 nm beam using a diffraction optical element, a fairly stable excitation condition is achieved to provide reliable assay results. By further taking advantage of the eminent encoding capability of upconversion nanoparticles and the extremely low background signals of anti-Stokes luminescence, the two targets are well-identified and simultaneously detected with quite sound sensitivity and specificity. Moreover, the potential on-demand clinical application is presented by employing this approach to respond the targets toward complex matrices such as serum and tissue samples, offering a new alternative for cancer diagnosis technology.

As an emerging fascinating fluorescent nanomaterial, carbon nanodots (CDs) have attracted much attention owing of their unique properties such as small size, antiphotobleaching, and biocompatibility. However, its use in biomedical analysis is limited because of its low quantum yield. Herein, we constructed a dual amplification fluorescence sensor by incorporating immunohybridization chain reaction (immuno-HCR) and metal-enhanced fluorescence (MEF) of CDs for the detection of alpha fetal protein (AFP). The immunoplasmonic slide and detection antibodies-conjugated oligonucleotide initiator are served to capture and probe AFP molecules, respectively. Then, CD-tagged hairpin nucleic acids were introduced to trigger the HCR, in which the hairpin nucleic acid and oligonucleotide initiator are complementary. The interaction between CDs and the gold nanoisland film greatly improves the radiative decay rate, increases the quantum yield, and enhances the fluorescence emission of the CDs. Furthermore, the HCR provides secondary amplification of fluorescence intensity. Therefore, the MEF-capable immunohybridization reactions provide obvious advantages and result in exceptional sensitivity. In addition, the sandwich immunoassay method offers high specificity. The results show a wide linearity between the fluorescence intensity and AFP concentration over 5 orders of magnitude (0.0005-5 ng/mL), and the detection limit reaches as low as 94.3 fg/mL. This method offers advantages of high sensitivity and reliability, wide detection range, and versatile plasmonic chips, thus presenting an alternative for the technologies in biomedical analysis and clinical applications.

Patients with prostate cancer and systemic lupus erythematosus exhibit reduced DNase I activity, and patients with myocardial infarction exhibit increased DNase I activity. So the assay of DNase I is of high importance. A colorimetric assay is described here for the determination of the activity of DNase. It is based on strand scission of dsDNA as catalyzed by DNase I. The products of digestion (nucleoside monophosphates) can better stabilize citrate capped AuNPs than dsDNA. In the absence of DNase I, the AuNPs aggregate in presence of NaCl and then display a blue color. In the presence of the analyte (DNase I), AuNPs do not aggregate but rather remain dispersed and display a red color. These findings were exploited to design a DNase I activity assay that is based on the measurement of ratio of absorbances at 520 nm (red) to 650 nm (blue). The detection limit for DNase I activity is found to be 7.1 U⋅L−1. In our perception, this assay has a large potential with respect to diagnoses of DNase I activity-related diseases and in drug screening.

We present an analytical platform by combining near-infrared optical tweezers with two-photon excitation for fluorescence detection of H5N1 virus gene sequences. A heterogeneous enrichment strategy, which involved polystyrene (PS) microsphere and quantum dots (QDs), was adopted. The final hybrid-conjugate microspheres were prepared by a facile one-step hybridization procedure by using PS microspheres capturing target DNA and QDs tagging, respectively. Quantitative detection was achieved by the optical tweezers setup with a low-cost 1064 nm nanosecond pulse laser for both optical trapping and two-photon excitation for the same hybrid-conjugate microsphere. The detection limits for both neuraminidase (NA) gene sequences and hemagglutinin (HA) gene sequences are 16-19 pM with good selectivity for one-base mismatch, which is approximately 1 order of magnitude lower than the most existing fluorescence-based analysis method. Besides, because of the fact that only signal from the trapped particle is detected upon two-photon excitation, this approach showed extremely low background in fluorescence detection and was successfully applied to directly detect target DNA in human whole serum without any separation steps and the corresponding results are very close to that in buffer solution, indicating the strong anti-interference ability of this method. Therefore, it can be expected to be an emerging alternative for straightforward detecting target species in complex samples with a simple procedure and high-throughput.

A novel strategy for the fabrication of a colorimetric aptasensor using label free gold nanoparticles (AuNPs) is proposed in this work, and the strategy has been employed for the assay of adenosine deaminase (ADA) activity. The aptasensor consists of adenosine (AD) aptamer, AD and AuNPs. The design of the biosensor takes advantage of the special optical properties of AuNPs and the interaction between AuNPs and single-strand DNA. In the absence of ADA, the AuNPs are aggregated and are blue in color under appropriate salt concentration because of the grid structure of an AD aptamer when binding to AD, while in the presence of the analyte, AuNPs remain dispersed with red color under the same concentration of salt owing to ADA converting AD into inosine which has no affinity with the AD aptamer, thus allowing quantitative investigation of ADA activity. The present strategy is simple, cost-effective, selective and sensitive for ADA with a detection limit of 1.526 U L(-1), which is about one order of magnitude lower than that previously reported. In addition, a very low concentration of the inhibitor erythro-9-(2-hydroxy-3-nonyl) adenine (EHNA) could generate a distinguishable response. Therefore, the AuNP-based colorimetric biosensor has great potential in the diagnosis of ADA-relevant diseases and drug screening.

A novel fluorescence “turn-on” strategy, which is based on the formation of Hg2+-mediated molecular-beacons (MBs), the preferable cleavage capacity of exonuclease III to double-stranded DNA compared with single-stranded one, and the remarkable difference in the binding ability of graphene oxide (GO) with single-stranded DNA and the mononucleotides, is designed for Hg2+ assay. The Hg2+-mediated base pairs facilitate the dye labeled MBs to fold into a hairpin structure, which is more likely to be digested by exonuclease III, and an obvious increase in the fluorescence intensity is observed after incubating with GO due to the weak affinity of the product-mononucleotides to GO. A fluorescent “turn-on” method based on graphene oxide and exonuclease III was designed for Hg2+ assay. The introduction of GO greatly increases the signal-to-background ratio, and the sensitivity is significantly improved due to the amplified capability of exonuclease III. Under the optimal conditions, Hg2+ is specifically and sensitively detected with a detection limit of 0.83 nM. Compared with the reported Hg2+ assay methods, the proposed strategy is simple, cost effective and selective, which might provide a new platform for developing a sensitive Hg2+ biosensor. Mercury level in the blood is an important indicator of mercury poisoning in clinical study. To testify the possibility of the use of this method for the assay of Hg2+ in real samples, detection of Hg2+ in 1% human serum was investigated and satisfactory results were obtained, which suggests that this method has great potential for bioanalysis.

We present a simple and sensitive method for multiplexed DNA detection by simultaneously capturing two different DNA sequences with a same silica nanoparticle (NP) through a sandwich mode. This biobarcode assay method was demonstrated by using oligonucleotide sequences of 64 bases associated with human papillomavirus (HPV) 16 and 18 L1 genes as model systems. The nonfluorescent carboxyl-modified silica NPs were prepared using water-in-oil (W/O) microemulsion methods. Avidin was immobilized on the surface of the NPs by covalent binding to the carboxyl linkers. The binding capacity of the avidin-covered NPs for ligand biotin was quantified and the results show that about 8 avidin molecules are bound to one nanoparticle. The silica nano-platforms were prepared through the biotin–avidin interaction and the amounts of capture DNA strands for HPV-16 and HPV-18 (C-16 and C-18, respectively) conjugated to the surface of the same NPs were measured using fluorescent dye hoechst33258. The calculated result shows that the amounts of conjugated C-16 and C-18 on 1 mg of NPs (9.2 pmol) are about 13.5 pmol and 15.5 pmol, respectively. A one-step hybridization reaction was performed by mixing the silica nano-platforms, HPV-16 and HPV-18 target DNA (T-16 and T-18), fluorescein amidite (FAM) or 6-carboxyl-X-rhodamine (Rox) labeled HPV-16 and HPV-18 probes. The hybrid-conjugated NPs were separated by centrifugation, and T-16 and T-18 were detected by measuring fluorescence signals of FAM and Rox respectively. The results show linear dependence of the fluorescence intensity on target DNA concentration in the range from 0.5 to 9 nM, and the detection limit (3 σ ) of T-16 and T-18 is 0.17 nM and 0.78 nM, respectively.

Two different functional groups modified RuBpy-doped silica fluorescent nanoprobes Probe A and B that conjugated with avidin were prepared for the recognition of liver cancer cells. Firstly RuBpy-doped silica nanoparticles were synthesized by reverse microemulsion and then modified with different functional groups. Probe A was prepared by the conjugation of avidin with carboxyl modified nanoparticles through covalent binding using EDC/sulfo-NHS, whereas Probe B was prepared by the conjugation of avidin with the PEG linkers on the surface nanoparticles using cyanogen bromide method. Therefore, different from Probe A, Probe B was obtained by coupling avidin to the nanoparticles through long-chain PEG molecules. The two probes were incubated with liver cancer cells respectively, and microscopic fluorescence imaging showed that Probe B which contained PEG molecules was more effectively applied for the recognition of tumor marker carcinoembryonic antigen (CEA) in liver cancer cells.

A method is proposed for the detection of Hg(2+) using Hg(2+) specific DNA (MSD) functionalized gold nanoparticles (AuNPs) based on the formation of T-Hg(2+)-T complex and the excellent quenching fluorescence property of AuNPs. The MSD is rich in thymine (T) and readily forms T-Hg(2+)-T configuration in the presence of Hg(2+). The MSD which is labeled with a fluorescein (FAM) at the 3'-end and a thiol at the 5'-end is bounded to the AuNPs through Au-S covalent bonds to form the probes (AuNPs-MSD). Hg(2+) detection can be easily realized by monitoring the change of fluorescence signal of AuNPs-MSD probes. Hg(2+) can be detected in a range of 0.02-1.0 µM with a detection limit of 16 nM. Besides, the assay shows excellent selectivity for Hg(2+) over other metal cations such as Fe(3+), Ca(2+), Mg(2+), Mn(2+), Cr(3+), Ni(2+), Cu(2+), Co(2+) and Pb(2+). The major advantages of this Hg(2+) assay are its water-solubility, simplicity, low cost and high sensitivity. Moreover, this method provides a potentially useful method for the Hg(2+) detection in aqueous solution.

Direct analysis of biomolecules in complex biological samples remains a major challenge for fluorescence-based approaches due to the interference of background signals. Herein, we report an analytical methodology by exploiting a single low-cost near-infrared sub-nanosecond pulse laser to synchronously actualize optical trapping and two-photon excitation fluorescence for senstive detection of carcinoembryonic antigen (CEA) in buffer solution and human whole serum with no separation steps. The assay is performed by simultaneously trapping and exciting the same immune-conjugated microsphere fabricated with a sandwich immunization strategy. Since the signal is strictly limited in the region of a three-dimensional focal volume where the microsphere is trapped, no obvious background signal is found to contribute the detected signals and thus high signal-to-background data are obtained. As a proof-of-concept study, the constructed platform exhibits good specificity for CEA and the detection limit reaches as low as 8pg/mL (45 fM) with a wide linear range from 0.01 to 60ng/mL in the both cases. To investigate the potential application of this platform in clinical diagnosis, 15 cases of serum samples were analyzed with satisfactory results, which further confirm the applicability of this method.

The world health organization figures show prostate cancer in developed countries has been the second primary cause of cancer mortality following lung cancer for the men. So, early and sensitive diagnosis of cancer is very important before it spreads out to the other organs of the body. It is well-known that prostate-specific antigen (PSA) is the most specific and efficient tumor marker for the diagnosis of prostate cancer. Herein, we successfully fabricated core-shell composite fluorescent nanoparticle Ag@SiO2@SiO2-RuBpy which provide a photoluminescence enhancement of up to ~3-fold when the separation distance between the surface of silver core and the center of the third RuBpy doped silica shell is about 10nm. These core-shell MEF-capable nanoparticles have obvious advantages. The interaction between the doped RuBpy molecules in the outer silica layer and the silver core, greatly improves the excitation efficiency and enhances the fluorescence intensity. Importantly, the presence of silica can reduce the self-quenching of RuBpy, which makes larger amounts of RuBpy incorporated into the silica shell. In addition, the shell protects the RuBpy against collisional quenching and irreversible photodegradation and provides abundant hydroxyl for easy conjugation. After that a highly sensitive, specific and reliable strategy based on metal-enhanced fluorescence and magnetic separation was applied for the detection of PSA in both buffer and serum. The process could be rapidly accomplished, in which the immunomagnetic nanospheres (IMNs) and immunofluorescent nanoparticles (IFNs) were used to capture and identify the target molecules simultaneously. A good linear relationship between the fluorescence intensity and the concentration of PSA (0.1-100ng/mL) with a detection limit 27pg/mL was obtained.

In this work, we have developed a simple and sensitive method for ATP detection using silica nanoparticles (NPs) as the platform and hoechst33258 as the signal reporter. The ATP-binding aptamers hybridize with the probe DNA (DNA p ) immobilized NPs to form the aptamer/DNA p duplex on the NPs surface. The conformational change of the aptamer leads to the decrease of the aptamer/DNA p duplex on the NPs due to the ATP-binding aptamer switches its structure from the aptamer/DNA p duplex to the aptamer/target complex in the presence of ATP. ATP detection can be easily realized by separating the silica nanoparticles and adding the hoechst33258 of intercalating to aptamer/DNA p (dsDNA). Good selectivity between ATP and CTP, GTP or UTP has been demonstrated, which is due to the specific recognition between ATP aptamer and ATP. The K d was estimated to be ∼1 mM from 0 to 4 mM and a liner response was observed from 0 to 0.2 mM with a detection limit of ∼20 μM. Compared with other methods, the carboxyl-modified silica nanoparticles (∼60 nm) prepared by the reverse microemulsion method can serve as a stable and sensitive sensor platform because of their smaller size and facile conjugation with amine-containing molecules. In addition, the high sensitivity and selectivity of hoechst33258 was employed for the ssDNA and dsDNA determination, which takes advantage of the label-free aptamer and lower cost.

This study presents the investigation of bioconjugating ability of near-infrared (NIR) CdSeTe/ZnS quantum dots (QDs) (710 nm) and visible CdSe QDs (595 nm) in immunofluorescent staining for cancer biomarkers in gastric cancer tissues probed with the homemade Hadamard transform (HT) spectral imaging microscope and a commercial multispectral imaging system. The results show that imunostaining ability of NIR QDs probes is stronger than that of visible QDs when the two kinds of QDs are simultaneously used to probe the cancer biomarkers such as cytokeratin 20 (CK20) and proliferating cell nuclear antigen (PCNA) in gastric cancer tissues. Moreover, when the two QDs probes are used for immunostaining successively for the same target molecules, staining order has great influences on the final results due to their different conjugating ability to the marker proteins. The results imply that NIR QDs hold more promise for real-time imaging of tumor tissues due to its higher sensitivity and contrast. In addition, the results also demonstrate the potential of Hadamard transform spectral imaging as a useful tool in biomedical analysis and quantitative evaluation for tumor tissues.

Chemiluminescence (CL) has been a useful tool for analytical applications. Fluorescein can be used to enhance CL emission of luminol. With three-dimensional (3D) dynamic CL spectrum obtained from a linear CCD (charge-coupled device) flow-injection CL spectrometer, the fluorescein enhanced CL analysis was studied. The enhanced process can be described with chemiluminescence resonance energy transfer (CRET) at certain fluorescein concentrations. In the process of CRET, fluorescein enlarges CL intensity but does not join the CL reaction. Compared with classic luminol–Co2+ CL system, the fluorescein-enhanced system exhibits stronger CL signal with the linear range and detection limit for traces of Co2+ unchanged.

This study presents a linear charge-coupled device (CCD) spectrometer and its application to quantitative determination of rutin with UV-Vis spectrophotometry and fluorimetry detections. The spectrometer can obtain spectrum with the range of 271.44 nm from one exposure and the 1.7 nm resolution. With the same spectrometer, the determination of rutin in rutin tablet was successfully studied by measuring the absorption and laser-induced fluorescence emission. The data shows that there is no significant difference for determining rutin between the two methods. The result implies that the spectrometer, which realizes two different analytical methods, can be widely used in trace analysis.

We report the development of Hadamard transform fluorescence spectral imaging microscopy by using a movable one-dimensional Hadamard mask to encode the image signals and a linear charge-coupled device (CCD) to detect the encoded spectral image signal. The technique has the ability of multi-spectral imaging and images with four dimensions: location coordinate (X and Y), fluorescence intensity (Z) and wavelength (lambda) (or time (t)) can be obtained. The results show that the system has high spectral resolving power (0.3 nm) and imaging capability, where image resolution up to 511 x 512 can be easily obtained for analysis of tiny samples. Multicolor imaging of acridine orange/ethidium bromide double-stained fibroblast treated with glyoxal shows that 1.5 mM glyoxal obviously causes apoptosis, thus demonstrating that identification of apoptotic cells can be realized using the Hadamard system not only through morphologic changes but also by the spectral evidences of the fluorescently stained cells. In addition, based on immunostaining with quantum dots (QDs) emitting at 550 and 610 nm to tag and trace two breast cancer biomarkers human epidermal growth factor receptor 2 (HER-2) and estrogen receptor (ER) in human breast cancer tissue with in situ dual-color fluorescence imaging, sensitive spectra and images were obtained and show that the system can be applied to visualize and quantitatively measure the subcellular proteins inside the tumor tissues, especially when a single laser line is used as the illuminating source for multi-components with different emission peaks. The preliminary biomedical applications indicate the great potential of the Hadamard imaging system as a useful tool in biomedicine.

Two novel N-(2-mercapto-1,3,4-thiadiazol-5-yl)-N'-(4-substituted-arylacetyl) urea compounds have been synthesized, characterized by NMR and MS, and used as self-assembly reagents to form self-assembled monolayers (SAMs) on Pt electrodes. The modified electrodes were characterized by electrochemical methods. The electrochemical behavior of p-benzenediol at the SAMs electrodes was investigated. It was found that the electrochemical response to p-benzenediol is controlled by diffusion and can be electrocatalyzed to obtain more symmetrical redox peaks and higher voltammetric current response at the SAMs electrodes, with a peak separation of 80 mV. For p-benzenediol the process at the SAMs electrodes is quasi-reversible with a rate constant of 0.6742 s-1. The SAMs electrodes have been used to determine p-benzenediol by differential pulse voltammetry. The peak current was linear for concentrations of p-benzenediol in the range 1x10(-7)-5x10(-4) mol L-1 and the detection limit was 4.0x10(-8) mol L-1. The SAMs electrodes were used to determine p-benzenediol in real photographic developer and in a synthetic waste water sample; the standard addition recovery was in the range 96.6-100.4%.

This paper presents a novel Hadamard transform (HT) fluorescence imaging microscope by combining multiplexed imaging technique with a conventional upright fluorescence microscope for single-cell imaging and quantitative cellular analysis. The HT imaging microscope can provide 511 x 512-pixel single-cell image with high sensitivity within 21 s. In this study, the high potential value of the microscope in biomedical analysis has been demonstrated by using it to evaluate the malignancy degree of thirty cases of human breast tumors based on the measurements of cellular DNA contents, with conclusions highly accordant with pathological diagnosis. The results show that the HT microscope has the ability to analyze very small specimens and the capability of detecting very high ploidy cells, which are advantages over flow cytometry. The microscope was also successfully applied to cellular morphological analysis, and it was demonstrated that a significant linear relationship exists between tumor nuclear DNA contents and the nuclear area, and malignant and benign tumors are significantly different in both DNA contents and nuclear area. The reliability of the HT microscope in cellular DNA measurements was also investigated.

In this report, a single‐channel chip fabricated with polymethylmethacrylate (PMMA) material was applied to sampling single pollen cells stained with acridine orange (AO). A home‐made Hadamard transform (HT) microscopic fluorescence image system was used to detect the fluorescence signal emitted from the cells and obtain 511 × 512‐pixel two‐dimensional image of single cells, by which single‐cell fluorescence was measured accurately and the DNA content was determined quantitatively. The single‐cell sampling and the on‐line imaging were discussed in detail. The PMMA chip, with a suitable channel approximately 100 µm in depth and 108 µm in width, was proved suitable for single‐cell sampling. The HT instrument was well matched to the on‐line imaging due to the powerful resolving ability. The reliability of the measurement was evaluated by measuring the fluorescent intensity of AO‐stained pollens in the channel for 11 times, with a coefficient of variation (CV) of 2.78%. The method was used for quanti...

Quantum dots (QDs) probes were used to tag and trace cancer biomarkers in cancer tissues based on the system of home-made Hadamard transform (HT) spectral microscopic imaging, which can be applied to provide high-resolution fluorescence spectrum and image of single cells and tissues. In situ fluorescence imaging for cancer marker proteins, such as estrogen receptor (ER), human epidermal growth factor receptor 2 (HER2), proliferating cell nuclear antigen (PCNA) and cytokeratin 20 (CK20) in tumor tissues, were realized by using the HT system to capture quantitative information for these proteins when tumor tissues were immunostained with QDs probes. A method to evaluate tumor malignancy of the specimens based on in situ analysis of distribution of marker proteins was proposed based on the comparative study of positive samples and negative controls. The investigation of ER contents of the cores in breast cancer tissue microarrays (TMAs) shows that the technique of QDs-immunohistochemistry (IHC)/HT spectral imaging is more sensitive than conventional IHC method. The results also demonstrate that the QDs-IHC/HT spectral imaging technique can be applied to visualize and quantitatively measure the subcellular molecules inside tumor tissues, and the coupling of HT spectral imaging to the probing of subcellular molecules with QDs has great potential in biology and medical diagnosis.

The effects of three sulfonate gemini surfactants with different hydrophobic chain lengths (8, 10, and 12 carbon atoms) on the optical properties of a fluorene-based conjugated cationic polymer poly{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]-fluorene-phenylene} bromide (PFP) dissolved in DMSO-water solutions (4% v/v) or water were investigated, respectively. When surfactants with PFP dissolved in DMSO-water solutions (4% v/v) are incubated, a decrease in photoluminescence (PL) intensity and a red shift of emission maxima are obtained at low surfactant concentrations. Intriguingly, two different Stern-Volmer constants (KSV1 and KSV2) are obtained and analyzed in detail for the first time. Further increase in the surfactant concentration enhanced PL intensity, and distinct blue shifts of both absorption and emission maxima are observed. Importantly, the turning point between the emission quenching and enhancement is closely related to the hydrophobic chain length: the longer the chain length, the earlier the turning point appears. Simulation studies provide strong evidence to explain these phenomena. Surface tension measurements show more insight on the interactions between PFP and surfactant. On the contrary, no emission quenching is obtained at low surfactant concentrations for PFP dissolved in water.

A novel fluorescence turn-on strategy, based on the resistance of metal-mediated molecular-beacons (MBs) toward nuclease digestion and the remarkable difference in the affinity of graphene oxide (GO) with MBs and the mononucleotides, is designed for the biothiols assay. Specifically, the metal-mediated base pairs facilitate the dye labeled MBs to fold into a hairpin structure preventing the digestion by exonuclease I, and thus allow the fluorescence quenching. The competition binding by biothiols removes metal ions from the base pairs, causing the nuclease reaction, and less decrease in the fluorescence is obtained after incubating with GO due to the weak affinity of the product-mononucleotides to GO. Hg(2+)-mediated MBs were firstly designed for the biothiols detection, and glutathione (GSH) was applied as the model target. Under the optimal conditions, the approach exhibits high sensitivity to GSH with a detection limit of 1.53 nM. Ag(+)-mediated MBs based sensor was also constructed to demonstrate its versatility, and cysteine was studied as the model target. The satisfactory results in the determination of biothiols in serum demonstrate that the method possesses great potential for detecting thiols in biological fluids. This new approach is expected to promote the exploitation of metal-mediated base pairs-based biosensors in biochemical and biomedical studies.

Mucin 1 (MUC1) which presents in epithelial malignancies, is a well-known tumor biomarker. In this paper, a highly sensitive and selective fluorescent aptasensor for Mucin 1 (MUC1) detection is constructed, utilizing graphene oxide (GO) as a quencher which can quench the fluorescence of single-stranded dye-labeled MUC1 specific aptamer. In the absence of MUC1, the adsorption of the dye-labeled aptamer on GO brings the dyes in close proximity to the GO surface resulting in high efficiency quenching of dye fluorescence. Therefore, the fluorescence of the designed aptasensor is completely quenched by GO, and the system shows very low background fluorescence. Conversely, and very importantly, upon the adding of MUC1, the quenched fluorescence is recovered significantly, and MUC1 can be detected in a wide range of 0.04-10 μM with a detection limit of 28 nM and good selectivity. Moreover, the results have also been verified for real sample application by testing 2% serum containing buffer solution spiked with a series of concentrations of MUC1.

By coupling flow-injection with laser-induced fluorescence detection, a setup was developed and a novel method combining fluorescence resonance energy transfer (FRET) and flow-injection analysis (FIA) was proposed for the determination of vitamin B12 (VB12) based on its fluorescence quenching on the system of acridine orange (AO)/rhodamine 6G (R6G). The effective energy transfer could occur between AO and R6G in the dodecyl benzene sodium sulfonate (DBS) while 454 nm argon laser was used as the excitation source, and as a result, the fluorescence emission of R6G has been increased significantly. It was found that the fluorescence of the above system could be sharply diminished by VB12. By using the mixed solution AO–R6G–DBS and the same solution containing VB12 as the carrier and sample, respectively, a series of negative peaks which could be applied for the quantification of VB12 were obtained. The detection limit for VB12 was 1.65 × 10−6 mol/L. The linear range for determining VB12 was 4 × 10−4 to 2 × 10−6 mol/L (correlation coefficient, r = 0.9923). The method was applied to measure VB12 injections with satisfactory results.

This study presents a novel miniaturized Hadamard transform fluorescence imaging microscope, by combining a conventional fluorescence microscope with Hadamard transform multiplexing encoding using a one-dimensional movable mask to realize spatial resolution and a linear CCD for multichannel detection. The microscope can provide high-resolution automatically-generated 0–255 gray level HT images for morphological analysis and visualization of a single cell, and normalized HT images for cellular quantitative measurements. The microscope’s imaging capability was applied to measure the DNA content in human lymphocyte, chicken erythrocyte and eel erythrocyte, and a comparative study was performed. The results show that the calibrated DNA content in a chicken erythrocyte is 2.32 pg when human lymphocyte is used as the standard, and eel erythrocyte may be a potentially reliable and novel standard for determining DNA contents in other species because it has a stable DNA value of 2.06 pg, with a CV of 4.3% when 20 eel erythrocytes are measured. The results also demonstrate that the HT imaging microscope should be valuable in the fields of medicine and cell biology.

We report an indirect method for cancer cell recognition using photostable fluorescent silica nanoprobes as biological labels. The dye-doped fluorescent silica nanoparticles were synthesized using the water-in-oil (W/O) reverse microemulsion method. The silica matrix was produced by the controlled hydrolysis of tetraethylorthosilicate (TEOS) in water nanodroplets with the initiation of ammonia (NH3·H2O). Fluorescein isothiocyanate (FITC) or rhodamine B isothiocyanate conjugated with dextran (RBITC-Dextran) was doped in silica nanoparticles (NPs) with a size of 60 ± 5 nm as a fluorescent signal element by covalent bonding and steric hindrance, respectively. The secondary antibody, goat anti-rabbit IgG, was conjugated on the surface of the PEG-terminated modified FITC-doped or RBITC-Dextran-doped silica nanoparticles (PFSiNPs or PBSiNPs) by covalent binding to the PEG linkers using the cyanogen bromide method. The concentrations of goat anti-rabbit IgG covering the nanoprobes were quantified via the Bradford method. In the proof-of-concept experiment, an epithelial cell adhesion molecule (EpCAM) on the human breast cancer SK-Br-3 cell surface was used as the tumor marker, and the nanoparticle functionalized with rabbit anti-EpCAM antibody was employed as the nanoprobe for cancer cell recognition. Compared with fluorescent dye labeled IgG (FITC-IgG and RBITC-IgG), the designed nanoprobes display dramatically increased stability of fluorescence as well as photostability under continuous irradiation.

We present a low background, highly selective and amplified fluorescent sensor for potassium ions using graphene oxide (GO) and a cationic conjugated polymer (CCP). This method takes advantage of the phenomenon that the addition of CCP cannot release the dye labeled guanine-rich DNA from the GO surface, and the conformational switch of the guanine-rich DNA from random coil to G-quadruplex induced by the target.