Search

Microporous aluminum-based metal-organic frameworks (CAU-1) are used to develop a simple and sensitive electrochemical sensor for myricetin (MYR) based on a modified carbon paste electrode (CPE) for the first time. The morphologies and electrochemical properties of the as-synthesized CAU-1 are studied utilizing various analytical methods including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, N

Herein, a novel visual method for detecting triazophos based on competitive bio-barcode immunoassay was described. The competitive immunoassay was established by gold nanoparticles (AuNPs), magnetic microparticle (MMPs) and triazophos, combined with biochip hybridization system to detect the residual of triazophos in water and apple. Because AuNPs carried many bio-barcodes, which hybridized with labeled DNA on the biochip, catalyzed signal amplification using silver staining was detected by grayscale values as well as the naked eye. Notably, the grayscale values decreases with increasing the concentrations of triazophos, and the color change weakened gradually. The detection range was in between 0.05 and 10 ng/mL and the minimum detection limit was set at 0.04 ng/mL. Percent recovery calculated from spiked water and apple samples ranged between 55.4 and 107.8% with relative standard deviations (RSDs) of 12.4–24.9%. It has therefore been shown that this protocol provides a new insight for rapid detection of small molecule pesticides in various matrices.

A molecularly imprinted polymer (MIP) with specific adsorption for patulin was successfully polymerized by precipitation polymerization using 2-oxindole (2-oxin) and 6-hydroxynicotinic acid (6-HNA) as dummy template molecules, methylacrylic acid (MAA) as a functional monomer, trimethylolpropane trimethacrylate (TRIM) as a crosslinker, 2,2-azobis-(2-methylpropionitrile) (AIBN) as a initiator, and methanol as a porogen solvent. The molecularly imprinted solid phase extraction (MI-SPE) column was prepared using the polymer as a sorbent and applied for the selective extraction of patulin from real samples. The results showed that the MI-SPE method had high selectivity and specific adsorption towards patulin with mean recoveries ranged between 81.3% and 106.3% and a relative standard deviation (RSD) 0.998. The limits of detection (LODs, S/N = 3) were 0.05–0.2 ng g−1, and the limits of quantification (LOQs, S/N = 10) were 0.2–0.5 ng g−1. The developed method showed a better purification and higher patulin recovery for real samples than the quick, easy, cheap, effective, rugged, safe “QuEChERS” method.

A competitive bio-barcode immunoassay is described for the trace detection of parathion in water, pear, cabbage, and rice samples. It is based on amplification by platinum nanoparticle acting as a nanozyme. Gold nanoparticles (AuNPs) were modified with (a) monoclonal antibodies (mAbs) against parathion, and (b) thiolated single-stranded DNA (ssDNA) oligonucleotides. Magnetic nanoparticles (MNPs) were functionalized with ovalbumin coupled with parathion hapten. Parathion and its hapten compete with mAbs on the surface of the AuNPs. Subsequently, the platinum nanoparticles (PtNPs) probe, which was functionalized with the complementary thiolated ssDNA (C-ssDNA), was added to the reaction mixture for the detection of parathion. The signal was catalytically amplified by coupling with platinum nanozyme using teramethylbenzidine and H2O2 as the chromogenic system. The immunoassay has a linear range that extends from 0.01–50 μg·L−1, and the limit of detection is 2.0 × 10−3 μg·L−1. The recoveries and relative standard deviations (RSDs) ranged from 91.1–114.4% and 3.6–15.8%, respectively. The method correlates well with data obtained by gas chromatography-tandem mass spectrometry (GC-MS/MS).

We aim to develop a solid-phase extraction (SPE) based on a dummy molecularly imprinted polymer (MIP) and liquid chromatography-tandem quadrupole mass spectrometry (LC-MS/MS) for selective determination of four pyridine carboxylic acid herbicides (aminopyralid, picloram, fluroxypyr, and clopyralid) in milk samples. Using picloram as the dummy template, MIP nanocomposites with highly selective recognition and adsorption for the target molecule and its structural analogs were successfully synthesized by precipitation polymerization. Adsorption isotherms and kinetics were used to determine the adsorption performance and specific recognition mechanism of both MIPs and non-molecularly imprinted polymers (NIP). The Scatchard plot analysis revealed that two different binding sites were formed in the MIP with maximum binding capacity (Qmax) of 1171.8 μg·g−1 and 3022.5 μg·g−1, respectively. Recovery at three spiking levels of 10, 20, and 50 μg·L−1 ranged between 75.3 and 89.8% with relative standard deviations (RSDs)

Herein, we developed a multi-analyte fluorescence immunoassay for detection of three organophosphate pesticides (triazophos, parathion, and chlorpyrifos) in various agro-products (rice, wheat, cucumber, cabbage, and apple) using fluorescently labeled oligonucleotide and gold nanoparticle (AuNP) signal amplification technology. The AuNP probes for the three analytes were constructed by simultaneously modifying the corresponding antibodies and fluorescently labeled oligonucleotides on the probe surface. Three fluorophores (6-FAM, Cy3, and Texas red) with high fluorescence intensity and little overlap of excitation/emission wavelengths were selected. The method showed satisfactory linearity for triazophos, parathion, and chlorpyrifos in the ranges of 0.01–20, 0.05–50, and 0.5–1000 μg/L, respectively. For the 3 analytes, the limits of detection (LODs) were 0.007, 0.009, and 0.087 μg/L, respectively. The average recoveries were 77.7–113.6%, with relative standard deviations (RSDs) of 7.1–17.1% in various food matrices. The proposed method offers great potential in food safety surveillance, and could be used as well as a reference for multi-residue analysis of other small-molecule contaminants.

In this study, a novel magnetic molecularly imprinted polymer (MMIP) was prepared by surface imprinting technology using 2-oxin and 6-HNA as dual virtual templates and 4-vinyl pyridine (4-VP) as the functional monomer for extraction of patulin (PAT) from the surface of magnetic nanoparticles. MMIPs were characterized by fourier transformed infrared (FT-IR) spectroscopy, X-ray diffraction, and vibrating sample magnetometry. The results showed that the molecularly imprinted polymer (MIP) was successfully coupled with magnetic nanoparticles and could be used as a magnetic selective recognition material. Moreover, MMIPs have a greater adsorption capacity for PAT than conventional MIPs. The magnetic dispersion solid-phase extraction procedure was optimized and then combined with liquid chromatography-tandem mass spectrometry (MDSPE-LC-MS/MS) for detection of PAT in juice samples. The method showed excellent analytical performance in terms of linearity (ranged between 0.5 μg L−1 and 100 μg L−1with correlation coefficients (r) higher than 0.999) and limit of detection (LOD) (0.1 μg L−1, S/N = 3). At three spiking concentrations (1, 10, and 50 μg L−1), the mean recoveries were ranged between 79.4% and 97.9% with relative standard deviations (RSDs)

Extractive electrospray ionization of 1-hydroxypyrene (1-OHP) is achieved by using non-polar solvents (e.g., benzene, toluene, xylene, pentane and hexane) as the primary ESI solvent. The extraction of 1-OHP from various polar sample solutions by a non-polar primary ESI solvent is identified and 1-OHP ionization efficiency strongly depends on the sample solution.