Search

This paper presents the development of a cheap and rapid electrochemical sensor for ascorbic acid detection. In particular, the graphite ink working electrode of screen-printed cells was covered by a film of elecrosynthesized molecularly imprinted polypyrrole (e-MIP); differential pulse voltammetry (DPV) was the selected method for the analyte detection. The ascorbic acid molecules were successfully entrapped in the polypyrrole film, creating the recognition sites. The best results were obtained after polypyrrole overoxidation and performing the measurements in phosphate buffer solution 0.05 M/KCl 0.1 M at pH 7.5. A comparison with the bare and the not-imprinted polypyrrole-modified electrodes showed that the e-MIP-based sensor had the highest selectivity and reproducibility. The developed method was applied to assess ascorbic acid in farmaceutical products, obtaining values not significantly different from the declared content.

In this study, a molecularly imprinted polymer (MIP)-based screen-printed cell is developed for detecting phenoxy herbicides using 2-methyl-4-chlorophenoxyacetic acid (MCPA) as the template. MCPA is a phenoxy herbicide widely used since 1945 to control broadleaf weeds via growth regulation, primarily in pasture and cereal crops. The potentiometric cell consists of a silver/silver chloride pseudo-reference electrode and a graphite working electrode coated with a MIP film. The polymeric layer is thermally formed after drop-coating of a pre-polymeric mixture composed of the reagents at the following molar ratio: 1 MCPA: 15 MAA (methacrylic acid): 7 EGDMA (ethylene glycol dimethacrylate). After template removal, the recognition cavities function as the ionophore of a classical ion selective electrode (ISE) membrane. The detected ion is the deprotonated MCPA specie, negatively charged, so the measurements were performed in phosphate buffer at pH 5.5. A linear decrease of the potential with MCPA concentration, ranging from 4 × 10−8 to 1 × 10−6 mol L−1, was obtained. The detection limit and the limit of quantification were, respectively, 10 nmol L−1 and 40 nmol L−1. A Nernstian slope of about −59 mV/dec was achieved. The method has precision and LOD required for MCPA determination in contaminated environmental samples.

This work presents the development of a MIP-based screen-printed potentiometric cell for sensing the pesticide atrazine. The cell comprises three screen-printed electrodes; the working and the counter are obtained by graphite-ink and the pseudo-reference by silver/silver chloride-ink. All electrodes are printed on the support of polyester. Obviously, only the working and the pseudo-reference electrodes are connected for potentiometric measurements. The prepolymeric mixture was composed of the reagents at the following molar ratio: 1 atrazine (ATZ):5 methacrylic acids (MAA):4 ethylene glycol dimethacrylate (EGDMA). An amount of 7 µL of the prepolymeric solution was drop coated on the graphite working electrode of the cell, and the polymerization was carried out in an oven at 70 °C overnight. The specific sites obtained after polymerization and template elution can be viewed as the ionophore of a usual ISE membrane. The active ion is the atrazine in its protonated form, positively charged, so the determination was carried out in aqueous solutions at pHs1.5. At these conditions, the potential increases linearly with atrazine concentration ranging from 5 × 10−7 to 5 × 10−6 M; the limit of detection obtained is 4 × 10−7 M. The slope of the calibration curve E vs. log c (obtained as an average value of the slope of different standardization performed with several electrodes) is 40(6) mV/dec; the sub-Nernstian behavior can be ascribed to the interference of the anions present in the solution media.

In recent years, plasmonic sensors have been used in various fields ranging from environmental monitoring, pharmaceutical analysis, medical diagnosis, and food quality assessment to forensics. A significant amount of information on plasmonic sensors and their applications already exists and there is a continuing development of reliable, selective, sensitive, and low-cost sensors. Combining molecularly imprinting technology with plasmonic sensors is an increasingly timely and important challenge to obtain portable, easy-to-use, particularly selective devices helpful in detecting analytes at the trace level. This review proposes an overview of the applications of molecularly imprinted plasmonic chemosensors and biosensors, critically discussing the performances, pros, and cons of the more recently developed devices.

Irbesartan is a drug used to treat hypertension and high blood pressure. Recent studies associated sartans with several forms of cancer, making removing this class of substances from the environment a high priority. The EU has categorized drugs as emerging pollutants, and they can be more potent than other substances because they were designed to operate at low concentrations. Thus, effective and sensitive methods of determining Irbesartan selectively and accurately in environmental samples are necessary. MIPs have already been used to remove pollutants from complex matrixes, so they were also chosen for this work. In particular, a polyacrylate-based MIP was used to functionalize the graphite working electrode of screen-printed cells (SPCs), aiming to develop a voltammetric method for Irbesartan sensing. The MIP composition and the experimental conditions for the electrochemical determination were optimized through a Design of Experiments (DoE) approach. The whole analysis was replicated with different SPCs obtaining similar results, which highlight the good reproducibility potential. MIP-based electrodes were also applied to determine Irbesartan in fortified tap water samples, obtaining high recovery percentages. Given the good results, the electrochemical method based on MIP-modified screen-printed electrodes is promising for quantifying Irbesartan at a trace level.

Deferoxamine (DFO) is a siderophore widely studied for its ability to bind iron(III) strongly. Thanks to its versatility, it is suitable for several clinical and analytical applications, from the recognized iron(III) chelation therapy to the most recent applications in sensing. The presence of three hydroxamic functional groups enables Deferoxamine to form stable complexes with iron(III) and other divalent and trivalent metal ions. Moreover, the terminal amino group in the DFO molecule, not involved in metal ion complexation, allows modification or functionalization of solid phases, nanoobjects, biopolymers, electrodes and optical devices. This review summarizes and discusses deferoxamine-based applications for the chelation and recognition of Fe(III).

Deferoxamine (DFO), a hydroxamic siderophore with a high affinity for Fe(III), is immobilized as a functionalized self-assembled monolayer of a thiol (SAM) on the gold surface of a screen-printed cell to develop a voltammetric sensor for iron(III). The surface of the working electrode was characterized, before and after functionalization, by determining surface properties such as the area and the double-layer capacitance. The Fe(III) detection was performed by DPV analysis after preconcentration of the cation at the open circuit potential in solution at pH = 1 for two minutes. The method was applied to the iron(III) quantification in water samples giving promising results.

The paper presents the synthesis and preliminary characterization of two novel solid-phase sorbents for iron(III), resulting from the functionalization of ethylene-vinyl alcohol copolymer (EVOH) with deferoxamine, DFO (DFO@EVOH), and a novel tripodal 3-hydroxy-4-pyridinone, named 3,4-HP (3,4-HP@EVOH). DFO and 3,4-HP have been covalently bonded to EVOH, using carbonyldiimidazole as a coupling agent. Before their use as Fe(III) sorbents, they were warm-pressed to obtain a thin film. Polymers have been characterized by conventional physico-chemical techniques, furthermore, the sorption properties towards Fe(III) were investigated. The physico-chemical characterization of the new solid-state devices demonstrates the effective linkage of the two receptors on the polymeric support. Despite a relatively low sorption capacity for both materials, the stoichiometry and the complexation constants of Fe(III)/DFO@EVOH and Fe(III)/3,4-HP@EVOH are in pretty good agreement with those obtained for the same ligands in aqueous solutions.

Intelligent packaging represents an emerging trend in the food industry, especially for highly perishable foods like milk and dairy products. Despite the apparent simplicity, miniaturized BCP-EVOH@ sensor, made of bromocresol purple (BCP) covalently bound to ethylene-vinyl alcohol (EVOH) copolymer, meets the goal of milk freshness monitoring during chilled storage, allowing both naked-eye evaluation and chemometric-assisted spoilage modelling and measurements.

Gold and Silver nanoparticles (AuNPs and AgNPs) are perfect platforms for developing sensing colorimetric devices thanks to their high surface to volume ratio and distinctive optical properties, particularly sensitive to changes in the surrounding environment. These characteristics ensure high sensitivity in colorimetric devices. Au and Ag nanoparticles can be capped with suitable molecules that can act as specific analyte receptors, so highly selective sensors can be obtained. This review aims to highlight the principal strategies developed during the last decade concerning the preparation of Au and Ag nanoparticle-based colorimetric sensors, with particular attention to environmental and health monitoring applications.

This review illustrates various types of polymer and nanocomposite polymeric based sensors used in a wide variety of devices. Moreover, it provides an overview of the trends and challenges in sensor research. As fundamental components of new devices, polymers play an important role in sensing applications. Indeed, polymers offer many advantages for sensor technologies: their manufacturing methods are pretty simple, they are relatively low-cost materials, and they can be functionalized and placed on different substrates. Polymers can participate in sensing mechanisms or act as supports for the sensing units. Another good quality of polymer-based materials is that their chemical structure can be modified to enhance their reactivity, biocompatibility, resistance to degradation, and flexibility.