Search

Paper wastes form the major biodegradable fraction of the municipal solid waste. One of the best ways to treat paper wastes is using them as a feedstock for biomethane production through anaerobic digestion (AD). However, the AD characteristics, kinetics, and energy potential of different types of paper wastes are not clear. In this study, four kinds of typical paper wastes including corrugated board (CB), office paper (OP), tissue paper (TP), and magazine paper (MP) were used as feedstocks to produce biomethane at different volatile solids (VS) organic loading (OL). TP had a high cellulose content and showed high biomethane potential, while the lowest was obtained by CB, possibly due to its high lignin content. Kinetic analysis showed that Cone and modified Gompertz model could fit the biomethane production process well. Energy potential analysis revealed that biomethane yield, electric generating efficiency, and electricity price were the principal factors accounting for the profitability of biomethane production project treating paper wastes. Overall, paper wastes could be a promising feedstock for biomethane production, because paper wastes not only had high biomethane yield and biodegradability that exceeded many kinds of organic wastes but also could be continuously supplied for AD plants without the influence of seasonal changes.

Having been generated with a tremendous amount annually, paper waste (PW) represents a large proportion in municipal solid waste (MSW) and also a potential source of renewable energy production through the application of anaerobic digestion (AD). However, the recalcitrant lignocellulosic structure poses obstacles to efficient utilization in this way. Recently, anaerobic and microaerobic pretreatment have attracted attention as approaches to overcome the obstacles of biogas production. This study was set out to present a systematic comparison and assessment of anaerobic and microaerobic pretreatment of PW with different oxygen loadings by five microbial agents: composting inoculum (CI), straw-decomposing inoculum (SI), cow manure (CM), sheep manure (SM), and digestate effluent (DE). The hints of microbial community evolution during the pretreatment and AD were tracked by 16S rRNA high-throughput sequencing. The results demonstrated that PW pretreated by DE with an oxygen loading of 15 ml/gVS showed the highest cumulative methane yield (CMY) of 343.2 ml/gVS, with a BD of 79.3%. In addition to DE, SI and SM were also regarded as outstanding microbial agents for pretreatment because of the acceleration of methane production at the early stage of AD. The microbial community analysis showed that Clostridium sensu stricto 1 and Clostridium sensu stricto 10 possessed high relative abundance after anaerobic pretreatment by SI, while Bacteroides and Macellibacteroides were enriched after microaerobic pretreatment by SM, which were all contributable to the cellulose degradation. Besides, aerobic Bacillus in SI and Acinetobacter in SM and DE probably promoted lignin degradation only under microaerobic conditions. During AD, VadinBC27, Ruminococcaceae Incertae Sedis, Clostridium sensu stricto 1, Fastidiosipila, and Caldicoprobacter were the crucial bacteria that facilitated the biodegradation of PW. By comparing the groups with same microbial agent, it could be found that changing the oxygen loading might result in the alternation between hydrogenotrophic and acetoclastic methanogens, which possibly affected the methanogenesis stage. This study not only devised a promising tactic for making full use of PW but also provided a greater understanding of the evolution of microbial community in the pretreatment and AD processes, targeting the efficient utilization of lignocellulosic biomass in full-scale applications.

This study investigated methane production, long-chain fatty acids (LCFAs) profile, and predominant microorganisms in anaerobic digestion (AD) of lipid-rich swine slaughterhouse waste (SSW). The maximum methane yield was 999.2 mL/g VS. LCFAs, as inhibitory hydrolysis products, accumulated first to 1165 mg/L on day 3, and then decreased sharply to 125.7 mg/L on day 9, and finally were degraded to 20 mg/L on day 27. Linoleic acid (C18:2), oleic acid (C18:1) and palmitic acid (C16:0) were the dominant LCFAs. The easy conversion of C18:1 to C16:0 compared with difficult degradation of C16:0 resulted in an increase of C16:0 on day 4–6. Predominant microorganisms were Clostridium, Syntrophomonas and Methanospirillum. This study proved the high methane potential of lipid-rich SSW and gained insights into the degradation process by analysis of intermediates of LCFAs and predominant microorganisms. The results can provide valuable guidance for efficient utilization of this waste to produce methane in future.

Lignocellulosic biomass is the most abundant natural resource with high biomethane potential. However, complex structure of lignocellulosic biomass has hampered the efficient utilization of this bioresource. Previous studies have investigated the overall anaerobic digestion performance of lignocellulosic biomass, but the individual participation of each lignocellulosic component during anaerobic digestion remained unclear. Thus, this study investigated the methane production characteristics of cellulose, hemicellulose, lignin and their mixtures along with the microbial communities involved in anaerobic digestion. The results showed that the biomethane potential of cellulose was higher than that of hemicellulose; however, hemicellulose was hydrolysed more quickly than cellulose, while lignin was very difficult to be digested. The higher concentrations of acetic, n-butyric and n-valeric acids hydrolysed from the hemicellulose resulted in a lower pH and more severe inhibition on methane production than that of cellulose, and the methanogenesis gradually recovered after pH adjustment. The co-digestion of cellulose and hemicellulose increased the methane yield and biodegradability compared to mono-digestions. The addition of lignin to cellulose brought more significant decrease in the methane yield of cellulose than that of hemicellulose. Substrate-related bacteria such as Clostridium sensu stricto, Lutaonella, Cloacibacillus and Christensenella showed higher relative abundance in cellulose digestate, and sugar-fermenting bacteria such as Saccharofermentans, Petrimonas and Levilinea were more rich in the digestate of hemicellulose. Moreover, methanogenic Methanospirillum and Methanothrix likely contributed to the methane production of cellulose, while aciduric methanogens from Methanobrevibacter, Methanomassiliicoccus, Methanobacterium and Methanoculleus contributed to that of hemicellulose. This study provides a deeper understanding of the mechanism in the bioconversion of lignocellulosic biomass during anaerobic digestion.

Alkaline pretreatment of lignocellulosic biomass has been intensively investigated but heavy water usage and environmental pollution from wastewater limits its industrial application. This study presents a pretreatment technique by in-situ injection of potassium hydroxide concentrations ranging from 0.8% to 10% (w/w) into the briquetting process of wheat straw and meadow grass. Results show that the biomethane yield and hydrolysis rate was improved significantly with a higher impact on wheat straw compared to meadow grass. The highest biomethane yield from wheat straw briquettes of 353mL.g-1 VS was obtained with 6.27% (w/w) potassium hydroxide injection, which was 14% higher than from untreated wheat straw. The hydrolysis rates of wheat straw and meadow grass increased from 4.27×10-2 to 5.32×10-2d-1 and 4.19×10-2 to 6.00×10-2d-1, respectively. The low water usage and no wastewater production make this a promising technology.

This study employs a microaerobic pretreatment that includes different microbial reagents combined with oxygen to enhance the energy conversion potential of rice straw (RS) via anaerobic digestion (AD) in a more cost-effective and time-efficient manner. Five broad varieties of microbial reagents including liquid consortium (LC), cow manure (CM), sheep dung (SD), biogas slurry (BS), and straw-decomposing consortia (SC), have been used as sources of useful microbes at varying oxygen concentrations of 0, 6, 12 and 24 mLO2/gVS to explore the effect of microaerobic pretreatment on RS degradation. The results showed that RS pretreated with SC had the highest cumulative methane yield (CMY) of 311.7 mL/gVS at 12 mLO2/gVS, followed by BS, CM, LC, and SD, with the CMYs of 270.5, 263.2, 257.1, and 256.7 mL/gVS at 6 mLO2/gVS, respectively. The RS pretreated with SC, BS, CM, LC, and SD led to improvements in the methane yield by 88.7%, 63.7%, 59.3%, 55.6%, and 55.4%, respectively, compared to the untreated RS. The microbial community analysis revealed that the relative abundance (RA) of Firmicutes, which are known to play a key role in accelerating the rate of hydrolysis, increased after microbial pretreatment combined with oxygen supply. The RA of Clostridium III, which facilitates cell wall degradation via hydrolytic pathways along with other sugar-fermenting bacteria, such as Saccharofermentans, Lutaonella, and Sedimentibacter, increased after AD in the digestate of pretreated RS compared to that in untreated RS. Moreover, a shift in acetoclastic and hydrogenotrophic archaea, including Methanothrix and Methanospirillum, was also observed, indicating precursor changes resulted by pretreatments and varied microbial metabolism, which might have enhanced the methane production process of RS. The energy potential analysis revealed that microbial pretreatment was a suitable technique for stimulating the energy conversion efficiency of RS. This study can be used as a reference for future utilization of a diverse range of lignocellulosic materials for clean energy production.

Effectiveness of steam explosion (SE) pretreatment for deconstructing the complex structural carbohydrates (SC) and lignin recalcitrance properties of rice straw (RS) for conjunctive improvement of biofuel yield and waste valorization was evaluated. This work exhibited successful pretreatment of RS at a different pressure (1.2, 1.5, and 1.8 MPa) and retention (3, 6, 9, and 12 min) for enhancement of SC contribution to biomethane production. Regression analysis demonstrated that SE pretreatment efficiency improved at high-temperature and short-retention time for biodegradation of RS. Maximum cumulative methane yield (EMY) achieved 254.8 mL/gvs at 1.2 MPa (3 min) of SE-treated RS with 62.7% of very significant improvement compared with untreated RS (156.6 mL/gvs). Furthermore, solid fraction of xylose, arabinose, cellobiose, glucose, and acid-soluble lignin in SE-treated RS of 1.2 MPa (3 min) were biodegraded by 27.4%, 46.4%, 100%, 48.8%, and 14.1%, respectively, after anaerobic digestion. Therefore, SE pretreatment was an encouraging approach for enhancing SC conversion to biomethane and waste resource to circular economy.

Tobacco stalk, a common agricultural waste derived from the harvest of tobacco, caused serious environmental pollution in China. In this study, the performance of biomethane production and characteristics of four varieties of tobacco stalk were investigated for the first time. The results showed that the highest cumulative methane yield of 130.2 mL/g-VS was obtained from Nicotiana tabacum L., Yunyan114, which had lower lignin content than other varieties of tobacco stalk. Moreover, different kinetic models were used to describe the biomethane production process, and it was found that the modified Gompertz model was more suitable to simulate the anaerobic digestion (AD) of tobacco stalk. The findings of this study not only showed a feasible method for minimizing the pollution issues of tobacco stalk waste but also gave fundamental information for future AD application.