Search

The official launch of the Chinese BeiDou Navigation Satellite System with global coverage (BDS-3) presents significant opportunities for various applications, including precision agriculture and autonomous driving, among others. With its global spatial coverage and hybrid space constellation comprising geosynchronous Earth orbit (GEO), inclined geosynchronous orbit (IGSO), and medium Earth orbit (MEO) satellites, BDS can significantly contribute to various GNSS remote sensing applications that require real-time, precise water surface height measurements with high temporal and spatial resolution, such as in tidal monitoring. In this paper, we propose a carrier-phase-based method for BDS Reflectometry (BDS-R) to precisely retrieve real-time water surface height. Firstly, the BDS-R altimetry method is introduced, along with a detailed explanation of the data processing procedures. Secondly, a quality control method tailored to the characteristics of low-cost BDS devices is developed. Thirdly, a land altimetry experiment is conducted to evaluate the precision of BDS-R and analyze the specific contribution of the BDS hybrid constellation. Finally, a water surface altimetry experiment validates the real-time monitoring capabilities for low-cost BDS-R. The results indicate that low-cost BDS-R can achieve real-time centimeter-level water level monitoring with a temporal resolution of 1 s in lakefront environments. The performance of BDS-R can be significantly improved by the BDS hybrid constellation, particularly IGSOs. It is concluded that low-cost BDS-R has great potential for promoting ground-based GNSS remote sensing applications. [ABSTRACT FROM AUTHOR]

The BeiDou Navigation Satellite System with global coverage (BDS-3) was officially launched on July 31, 2020. In addition to the legacy B1I and B3I signals from the regional system (BDS-2), BDS-3 provides several new signals, i.e., B1C, B2a, B2b and B2a + b, with advanced technologies and global availability, which brings new opportunities for ground-based BDS multipath reflectometry (BDS-MR) altimetry. Previous studies focused on the MR altimetry performance of the legacy signals using signal-to-noise ratio (SNR) observations, but the new BDS signals have not been investigated. In this contribution, all types of BDS-3 SNR data collected from seven International GNSS Service (IGS) stations are analyzed signal by signal in terms of SNR quality and altimetry performance, while the legacy BDS B2I and Global Positioning System (GPS) L2C signals are also selected for comparison. Seven globally distributed IGS stations are first investigated for the quality of SNR observations, and then two optimally selected land stations are used to assess BDS-MR based altimetry performance, while a coastal station is used to assess BDS-MR for sea level retrieval performance. It is found that the quality of SNR observations varied site by site due to the differences in environment and equipment, but in general, the new signals except B1C show a higher level of SNR. Then, no detectable biases among each signal are found for land altimetry, while new signals could yield higher amplitude when performing spectral analysis. In coastal sea level altimetry, only two new signals B1C and B2a are available at the selected IGS station, and it is observed that the retrieval performance of BDS B2a is comparable to that of B2I, B3I and GPS L2C with root-mean-square errors (RMSEs) of about 21 cm, while that for B1I and B1C is slightly poorer with RMSEs of 29.68 cm and 26.66 cm respectively. [ABSTRACT FROM AUTHOR]