Search

Sc-containing Al alloys have excellent mechanical properties, which provide the foundation for their applications. The precipitation of the Al 3 Sc/Al 3 (Sc, Zr) is generally considered to be a key factor for the performance boost. However, the performances of the alloy in different production batches often exhibit unstable and fluctuation, which may be related to the heterogeneous of scandium. Herein, we investigated the precipitation behaviors of Al 3 Sc/Al 3 (Sc, Zr) phases in the Al-0.5Sc and Al-0.5Sc-0.25Zr alloys at 340 °C. Results shown that the high scandium‑zirconium ratio not only lead to the discontinuous precipitation, but also contribute to the abnormal continuous Al 3 (Sc, Zr) precipitation in Al-0.5Sc-0.25Zr alloy. The morphology of abnormal Al 3 (Sc, Zr) is similar to the common secondary Al 3 (Sc, Zr) phase with a coffee-bean like morphology. With the aid of Three-Dimensional Atomic Probe (3DAP), the core-shell structures of Al 3 (Sc, Zr) phases are quantitatively analyzed. In the shell layer of abnormal Al 3 (Sc, Zr) phase, the atomic concentration ratio of Sc to Zr is much higher than the common continuous precipitated Al 3 (Sc, Zr) phase. The abnormal Al 3 (Sc, Zr) phase may be one of the key factors for the structure heredity of Sc-containing Al alloys. [Display omitted] • The discontinuous precipitated Al 3 Sc phases are related to the partial high ratio of Sc/Zr (at.%) in Al alloys. • The discontinuous precipitated Al 3 Sc phases form at the casting process and gradually decompose at annealing process. • The high scandium-zirconium ratio leads to the decrease of coarsening resistance of the secondary Al 3 (Sc, Zr) phase. [ABSTRACT FROM AUTHOR]

The morphology of primary Al 3 Sc phase in Al-2.2Sc(wt%) was found to be influenced by melting condition. Some representative morphology appeared in large quantities at specific melting temperatures, holding times, and cooling rates. Crystallography of primary phases with various morphologies was researched, and the growth processes of the primary phase were investigated. Deformed cubes and dendrite can be developed from cubes, the butterfly-like particles had multiple layers inside, and repeated eutectic reactions were the main reason for the formation of multilayer structures. Al-2.2Sc(wt%) master alloys with different morphologies of primary Al 3 Sc phase can lead to different refining effects, and the mechanical properties of alloys were consequently influenced. The structure heredity of Al Sc master alloy was proved to be existed, and not influenced by prolonging insulation time and sufficient stirring. Unlabelled Image [ABSTRACT FROM AUTHOR]

The hardening behavior of Al-0.25Sc and Al-0.25–0.12 (wt.%) alloys during isothermal annealing were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), optical microscopy (OM), and hardness measurements. The results show that Sc-containing aluminum alloy contained fine dispersion of spherical secondary Al 3 Sc particles, which developed during the annealing process. Al 3 (Sc, Zr) precipitates in the Al-0.25Sc-0.12Zr alloys are core-shell structure. Different isothermal annealing temperatures can lead to different strengthening effects on the alloys. Al-0.25Sc and Al-0.25Sc-0.12Zr alloys both exhibit obvious annealing hardening behavior, and the ternary Al-0.25Sc-0.12Zr alloy shows better thermal stability than Al-0.25Sc alloy. • The diffusion rate of Sc atoms is inhibited by Zr atoms, which can prevent the coarsening of Al 3 (Sc, Zr). • The hardness decrease in Al–Sc alloy is mainly caused by the coarsening of Al 3 Sc particle. • The radius of the Al 3 (Sc,Zr) particles can maintain their value when annealed at higher temperature (>340 °C) for longer time (∼24 h). [ABSTRACT FROM AUTHOR]

The effects of trace Sc and Y on the corrosion behaviors of cold-drawn Al-0.2Ce alloys were revealed by scanning Kelvin probe force microscopy (SKPFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Electron Probe Micro-analyzer (EPMA), and electrochemical measurements. The results showed that the Al 3 Sc particles not only enable the increase of subgrain boundaries in the modified alloy after cold drawing but also improve the morphology and size of the Al 13 Fe 3 Ce phase. SKPFM analysis showed that the enrichment of Y around the Al 13 Fe 3 Ce phase in the modified alloy can decrease its electrochemical inertness and thus reduce the micro-galvanic corrosion susceptibility of the alloy. The results of the electrochemical analysis showed that the individual and composite addition of Sc and Y can improve the corrosion resistance of the cold-drawn Al-0.2Ce alloy. The corrosion potential and current of Al-0.2Ce-0.2Sc alloy are −0.892 V and 0.91 μA·cm−2, while the corrosion potential and current of Al-0.2Ce-0.1Y alloy are −0.918 V and 1.08 μA·cm−2, respectively. It is obvious that Sc element improves the corrosion resistance of Al-0.2Ce alloy more effectively than Y element. The corrosion depth of Al-0.2Ce-0.2Sc-0.1Y alloy was the smallest tested by immersion under the same conditions, and its corrosion potential and corrosion current were −0.842 V and 0.79 μA·cm−2, respectively, corresponding to the best corrosion resistance. The formal mechanism of pitting corrosion in the alloys is also discussed. [Display omitted] • Effect of Sc on microstructure and corrosion of Al-0.2Ce alloy was revealed. • The enrichment of Y atoms around Al 13 Fe 3 Ce can reduce the potential difference. • The corrosion behaviors of pitting corrosion induced by Al 13 Fe 3 Ce was discussed. • The equivalent circuit of the studied alloys was identified. [ABSTRACT FROM AUTHOR]

The quench sensitivity of Al–Mg–Si–Mn–Cr alloy was studied through time-temperature-transformation (TTT) and time-temperature-property (TTP) curves. The high quench sensitive region ranges from 250 °C to 430 °C with nose temperature at about 350 °C, where the quenching rate is required to higher than 9 °C/s for avoiding the formation of quench-induced precipitates. B′(Al 3 Mg 9 Si 7) precipitates from the supersaturated solid solution, and gradually transforms to equilibrium β (Mg 2 Si) and excess Si phase with increasing isothermal time at 350 °C. The loss of the solute atoms in matrix results in the reduction of the aging hardening precipitation and the formation of the precipitate-free zones (PFZs) during artificial aging. The nucleation rate of the quench-induced precipitation is studied by nucleation theory, and the phase transformation kinetics is analyzed through Avrami equation. The Al(MnCrFe)Si dispersoids, (sub)grain boundaries and dislocations are the preferential heterogeneous nucleation sites for quench-induced precipitation. • The quench sensitivity of the alloy was studied by time-temperature-transformation and time-temperature-property curves. • The microstructure evolution of the quench-induced precipitate and its effect on mechanical properties were analyzed. • The nucleation rate and phase transformation kinetics of the precipitation were investigated. • The preferential heterogeneous nucleation site for quench-induced precipitation was discussed. [ABSTRACT FROM AUTHOR]