Search

Boronized alloys with high surface hardness has been revealed advance in enhancing the anti-wear performance of critical mechanic components. However, its application in industrial production is greatly limited due to the poor mechanical properties with crystallographic orientated brittle borides. In the present study, we demonstrated that high ductility and high strength were achieved for the boronized AlCoCrFeNi 2.1 eutectic high entropy alloy (EHEA) with the formation of nano-sized borides. The AlCoCrFeNi 2.1 EHEA was treated with electrochemical boronizing method, and its phase formation was studied by x-ray diffraction (XRD), electron back-scattered diffraction (EBSD) and focused ion beam-transmission electron microscope (FIB-TEM). Results show that the nano-grained of FeB, NiB and Cr 3 B 4 with size of about 135.5 nm were formed on the boronized layer with non-preferred crystallographic orientation of the phase. The surface hardness of boronized AlCoCrFeNi2.1 EHEA reached to about 18 GPa, being about 4 times higher than that of the original alloy. Further investigation by tensile testing shows that the tensile strength of boronized samples is about 1.2 GPa with a respectable ductility of about 16.04% (± 0.49) tensile ductility to failure. Meanwhile, extension test and digital image correlation (XTDIC) test shows that the boronized layer failed when the tensile ductility is about 5.1%. The disordered nano-grained in the boronized layer benefit in preventing the formation and propagation of cracks, which improved the ductility of the boronized AlCoCrFeNi 2.1 EHEAs. [Display omitted] • The nano-sized borides of FeB, NiB and Cr 3 B 4 with grain size about 135.5 nm was generated on the AlCoCrFeNi 2.1 EHEA surface. • The elongation and strength of boronized EHEA reach 16.04% and 1197 MPa, and the surface hardness reaches 21 GPa. • The fracture of the brittle boronized layer occurred at the strain of 5.1%. • The crystallographic non-oriented nano-sized borides significantly inhibition crack generation and propagation. [ABSTRACT FROM AUTHOR]

• Enhanced wear-resistance were achieved by reducing the content of Nb in TiZrHfNb. • The wear loss is related to the subsurface instabilities during friction. • Deformation-induced grain refinement and phase transformation enhance wear-resistance. A sliding enhanced wear-resistance can be significantly achieved by reducing the content of Nb element in TiZrHfNb refractory high entropy alloys (RHEAs). The wear loss reduced by half from TiZrHfNb to TiZrHfNb 0.4. The wear loss is directly related to the subsurface instabilities induced by plastic deformation during friction. The origins can be attributed to two factors: i) plastic deformation induced grain refinement; ii) deformation-induced BCC to HCP phase transformation. [ABSTRACT FROM AUTHOR]