Search

We attempted to optimize the process-based parameters during friction stir welding of AZ80A - AZ31B Mg alloys with the objective of enhancing the mechanical properties of the fabricated joints. A response surface method based grey relational analysis was employed using three factors and three distinctive levels. A central composite design based multi-objective numerical model using the technique of grey relational analysis was formulated for optimizing the tool dependent parameters, namely tool's rotational speed, its speed of traverse and geometry of the pin. Grey relational grade was determined for all the responses: tensile strength and elongation percentage. Analysis of variance was employed for attaining grey relational grade to determine the most influential parameter of the FSW process. It was observed that the geometry of the tool pin had a greater impact in ascertaining the quality of the fabricated Mg alloy joints, and the tool possessing tapered cylindrical pin geometry exhibited larger values of grey relational grade. Optimized process parameter settings based on the attained GRG values were recorded to be 1100 rpm rotational speed, speed of traverse of 1.5 mm/sec and a tool with taper cylindrical pin geometry. The anticipated values were validated through confirmation investigational runs performed during employment of optimized parameter combinations, which exhibited a perfect agreement with the investigational run values and the confirmatory joint exhibited a tensile strength of 260.42 MPa and elongation percentage of 6.53. [ABSTRACT FROM AUTHOR]