Search

At a low depth of discharge, the performance of rechargeable alkaline Zn/MnO2 batteries is determined by the concomitant processes of hydrogen ion insertion and electro-reduction in the solid phase of γ-MnO2. Ab initio computational methods based on density functional theory (DFT) were applied to study the mechanism of hydrogen ion insertion into the pyrolusite (β), ramsdellite (R), and nsutite (γ)MnO2 polymorphs. Itwas found that hydrogen ion insertion induced significant distortion in the crystal structures ofMnO2 polymorphs. Calculations demonstrated that the hydrogen ions inserted into γ-MnO2 initially occupied the larger 2×1 ramsdellite tunnels. The protonated form of γ-MnO2 was found to be stable over the discharge range during which up to two hydrogen ions were inserted into each 2×1 tunnel. At the same time, the study showed that the insertion of hydrogen ions into the 1×1 pyrolusite tunnels of γ-MnO2 created instability leading to the structural breakdown of γ-MnO2. The results of this study explain the presence of groutite (α-MnOOH) and the absence of manganite (γ-MnOOH) among the reaction products of partially reduced γ-MnO2. [ABSTRACT FROM AUTHOR]

Rechargeable Zn/MnO 2 alkaline batteries are a promising technology for grid storage applications since they are safe, low cost, and considered environmentally friendly. Here, a commercial ceramic sodium ion conductor which is impervious to zincate [Zn(OH) 4 2− ], a contributor to MnO 2 cathode failure, is evaluated as the battery separator. As received, the ionic conductivity of this separator was measured with electrochemical impedance spectroscopy to be 3.5 mS cm −1 , while its thickness is 1.0 mm, resulting in large total membrane resistance of 25.3 Ω. Reducing the thickness of the ceramic to 0.5 mm provided for a decreased resistance of 9.8 Ω. Crossover experiments conducted using inductively coupled plasma - mass spectrometry measurements failed to measure any Zn(OH) 4 2− transport indicating a diffusion coefficient that is at least two orders of magnitude less than that for the commercial cellophane and Celgard separators. For 5% DOD at a C/5 rate, the cycle lifetime was increased by over 22% using the 0.5 mm thick ceramic separator compared to traditional Celgard and cellophane separators. Scanning electron microscopy/energy dispersive X-ray spectroscopy and X-ray diffraction characterization of cycled electrodes showed limited amounts of zinc species on the cathode utilizing the ceramic separator, consistent with its prevention of Zn(OH) 4 2− transport. [ABSTRACT FROM AUTHOR]

Rechargeable alkaline Zn/MnO2 batteries are being developed for use as cost-effective grid-scale energy storage devices. Previous studies have shown that limiting the depth of discharge (DOD) of the MnO2 cathode extends cell lifetime while still providing a cost-effective battery system. Herein, a comprehensive study of triethanolamine (TEA) as an additive in Zn/MnO2 limited DOD batteries is provided by examining the effect of TEA in full cells as well as independently on the cathode, anode, separator, and electrolyte. Improvement in cycle-ability of the cathode (on average, 80% of cycled capacity remains after 191 cycles without TEA, 568 cycles with TEA) and a decrease in ionic zinc mobility across Celgard 3501 (7.91 x 10-5 cm²/min without TEA, 3.56 x 10-5 cm²/min with TEA) and Cellophane 350P00 (3.26 x 10-5 cm²/min without TEA, 4.74 x 10-6 cm²/min with TEA) separators upon the addition of TEA are demonstrated. However, TEA increased both the reduction potential of Zn (-0.68 V vs. Hg/HgO without TEA, -0.76 V with TEA) and the solubility of Zn2+ (0.813 M without TEA, 1.023 M with TEA). Overall, the addition of TEA extended the lifetime of limited DOD cells on average by 297%. [ABSTRACT FROM AUTHOR]