Search

This paper describes the application of a novel multiobjective self-adaptive differential evolution (MOSADE) algorithm for the simultaneous optimization of component sizing and control strategy in parallel hybrid electric vehicles (HEVs). Based on an electric assist control strategy, the HEV optimal design problem is formulated as a nonlinear constrained multiobjective problem with competing and noncommensurable objectives of fuel consumption and emissions. The driving performance requirements are considered constraints. The proposed MOSADE approach adopts an external elitist archive to retain nondominated solutions that are found during the evolutionary process. To preserve the diversity of Pareto optimal solutions, a progressive comparison truncation operator based on the normalized nearest neighbor distance is proposed. Moreover, a fuzzy set theory is employed to extract the best compromise solution. Finally, the optimization is performed over the following three typical driving cycles that are currently used in the U.S. and European communities: 1) the file transfer protocol; 2) ECE +EUDC; and 3) Urban Dynamometer Driving Schedule. The results demonstrate the capability of the proposed approach to generate well-distributed Pareto optimal solutions of the HEV multiobjective optimization design problem. The comparison with the reported results of genetic-algorithm-based weighting sum approaches and Nondominated Sorting Genetic Algorithm II reveals the superiority of the proposed approach and confirms its potential for optimal HEV design. [ABSTRACT FROM PUBLISHER]

Abstract: Wind is one of the most promising sources of alternative energy. The construction of wind farms is destined to grow in the U.S., possibly twenty-fold by the year 2030. To maximize the wind energy capture, this paper presents a model for wind turbine placement based on the wind distribution. The model considers wake loss, which can be calculated based on wind turbine locations, and wind direction. Since the turbine layout design is a constrained optimization problem, for ease of solving it, the constraints are transformed into a second objective function. Then a multi-objective evolutionary strategy algorithm is developed to solve the transformed bi-criteria optimization problem, which maximizes the expected energy output, as well as minimizes the constraint violations. The presented model is illustrated with examples as well as an industrial application. [Copyright &y& Elsevier]

The current Weather Surveillance Radar-1988 Doppler (WSR-88D) radar network is approaching 20 years of age, leading researchers to begin exploring new opportunities for a next-generation network in the United States. With a vast list of requirements for a new weather radar network, research has provided various approaches to the design and fabrication of such a network. Additionally, new weather radar networks in other countries, as well as networks on smaller scales, must balance a large number of variables in order to operate in the most effective way possible. To offer network designers an objective analysis tool for such decisions, a coverage optimization technique, utilizing a genetic algorithm with a focus on low-level coverage, is presented. Optimization is achieved using a variety of variables and methods, including the use of climatology, population density, and attenuation due to average precipitation conditions. A method to account for terrain blockage in mountainous regions is also presented. Various combinations of multifrequency radar networks are explored, and results are presented in the form of a coverage-based cost-benefit analysis, with considerations for total network lifetime cost. [ABSTRACT FROM AUTHOR]

One of the primary design requirements of automotive generation systems is maximizing power density subject to the constraint of minimizing the overall system cost. However, with the progress made in the reduction of automotive drive train noise, the torque ripple of the generator has been found to be a dominant noise source under idle conditions at high electrical loads. Thus, an added design constraint is the minimization of the torque ripple produced by the machine. In order to evaluate alternative machine designs (and select an optimal), numerical tools are typically applied. In this research, a focus is placed on the creation of numerical tools that can be used to effectively search for an optimal design. A primary tool is an evolutionary algorithm (EA) that has been integrated within a customized magnetic equivalent circuit (MEC) model of the machine. The selection of an EA that is most likely to converge to an optimal solution in the least amount of time is described along with its use in selecting an optimal rotor-pole geometry. [ABSTRACT FROM AUTHOR]