Search

As an important complement and enhancement technique for cellular communication systems, the device-to-device (D2D) technique has exhibited a number of benefits in terms of, for instance, offering an improved spectral efficiency, enabling a reduced transmit power and providing an enhanced channel capacity, etc. However, a severe interference may be imposed on the conventional cellular users by the activated D2D links, thus, substantially eroding the performance of the former. In this paper, we propose an interference limited area (ILA) based D2D-management scheme along with an appropriately designed power control algorithm for mitigating the above-mentioned interference. We first derive the closed-form expressions of the average coverage probability for both the cellular and D2D links under the proposed ILA scheme, followed by proposing a resource-allocation algorithm subject to a power control mechanism. Numerical results show that the proposed ILA scheme is capable of outperforming the conventional scheme in terms of both the coverage probability (i.e., for both cellular and D2D links) and the sum data rate, particularly in the scenarios with a high D2D density and a high signal-to-interference-plus-noise ratio. [ABSTRACT FROM AUTHOR]

The increasing densification of telecommunications mobile networks raises the compelling problem of exposure to electromagnetic fields (EMF). In this paper, we address the particular concept of heterogeneous networks, where small cells (SCs) are deployed to build up a second layer to the existing macrocell network. SC deployment is shown to be particularly effective in reducing EMF exposure, in addition to capacity enhancement. Previous studies on EMF have focused on the uplink (UL) and downlink (DL) components separately, although they are strongly correlated. Relying on the definition of the exposure index (EI) from the European FP7 Lexnet project, we evaluate the impact on EMF exposure due to SC deployment. Guidelines for EMF-efficient deployment of SCs are first presented and evaluated. Then, a new enhanced intercell interference coordination (eICIC) algorithm using UL and DL metrics to optimize capacity and exposure to EMF is proposed. Static and self-optimizing dynamic implementations of the solution are considered, using a utility function related to the sojourn time of the users. Time-domain and frequency-domain self-optimized eICIC are compared in terms of EMF exposure reduction and capacity enhancement. The eICIC algorithms are combined with a self-optimized coverage range expansion function leading to further reduction of the EI. The proposed solution for optimizing both capacity and exposure to EMF is compared with a capacity-driven solution based on the DL metrics only. Simulation results illustrate the performance gains obtained for the different SC deployment scenarios. [ABSTRACT FROM PUBLISHER]

In wireless network resource allocation, the radio power control problems are often solved by fixed point algorithms. Although these algorithms give feasible problem solutions, such solutions often lack notion of problem optimality. This paper reconsiders well-known fixed-point algorithms, such as those with standard and type-II standard interference functions, and investigates the conditions under which they give optimal solutions. The optimality is established by the recently proposed fast-Lipschitz optimization framework. To apply such a framework, the analysis is performed by a logarithmic transformation of variables that gives tractable fast-Lipschitz problems. It is shown how the logarithmic problem constraints are contractive by the standard or type-II standard assumptions on the power control problem, and how sets of cost functions fulfill the fast-Lipschitz qualifying conditions. The analysis on nonmonotonic interference function allows establishing a new qualifying condition for fast-Lipschitz optimization. The results are illustrated by considering power control problems with standard interference function, problems with type-II standard interference functions, and a case of subhomogeneous power control problems. Given the generality of fast-Lipschitz optimization compared to traditional methods for resource allocation, it is concluded that such an optimization may help to determine the optimality of many resource allocation problems in wireless networks. [ABSTRACT FROM AUTHOR]

In an interference limited network, joint power and admission control (JPAC) aims at supporting a maximum number of links at their specified signal-to-interference-plus-noise ratio (SINR) targets while using minimum total transmission power. Various convex approximation deflation approaches have been developed for the JPAC problem. In this paper, we propose an effective polynomial time non-convex approximation deflation approach for solving the problem. The approach is based on the non-convex \ell q~(0< q< 1) approximation of an equivalent sparse \ell 0 reformulation of the JPAC problem. We show that, for any instance of the JPAC problem, there exists a \bar q\in (0,1) such that it can be exactly solved by solving its \ell q approximation problem with any q\in (0, \bar q]. We also show that finding the global solution of the \ell q approximation problem is NP-hard. Then, we propose a potential reduction interior-point algorithm, which can return an \epsilon -KKT solution of the NP-hard \ell q approximation problem in polynomial time. The returned solution can be used to check the simultaneous supportability of all links in the network and to guide an iterative link removal procedure, resulting in the polynomial time non-convex approximation deflation approach for the JPAC problem. Numerical simulations show that the proposed approach outperforms the existing convex approximation approaches in terms of the number of supported links and the total transmission power, particularly exhibiting a quite good performance in selecting which subset of links to support. [ABSTRACT FROM PUBLISHER]

In this paper, we consider the problem of power control for sum-rate maximization on multiple interfering links [transmitter–receiver pairs (Tx–RX)] under a sum power constraint. We consider a single-frequency network, where all pairs are operating in the same frequency band, thereby creating interference with each other. We study the power-allocation problem for sum-rate maximization with and without quality-of-service (QoS) requirements on individual links. When the objective is only sum-rate maximization without QoS guarantees, we develop an analytic solution to decide optimal power allocation for a two-TX–RX-pair problem. We also develop a low-complexity iterative algorithm for a three-TX–RX-pair problem. For a generic N>\3 TX–RX pair problem, we develop two low-complexity suboptimal power-allocation algorithms. The first algorithm is based on the idea of making clusters of two or three TX–RX pairs and then leveraging the power-allocation results obtained for the two- and three-TX–RX-pair problems. The second algorithm is developed by using a high signal-to-interference-plus-noise ratio (SINR) approximation, and this algorithm can be also implemented in a distributed manner by individual TXs. We then consider the same problem but with additional QoS guarantees for individual links. We again develop an analytic solution for the two-TX–RX-pair problem and a distributed algorithm for N>\2 TX–RX pairs. [ABSTRACT FROM PUBLISHER]

In wireless communication systems with multiple users, the near–far effect and the cochannel interferences decrease the spectral efficiency and system performance. An efficient known method to combat these destructive effects is to properly adjust the transmit powers. A practical and efficient way for power control (PC) in cellular communication systems is the autonomous distributed PC (DPC). In this method, the transmit power of each link is independently modified based on the received signal-to-interference-plus-noise ratio (SINR) reported from the other side of that link. It is known that in a perfect scenario where the reported SINRs are exact, this algorithm converges to the optimum transmit powers. However, in the case of erroneous SINR reports, the transmit powers deviate from their optimum values. This paper addresses the destructive effect of inaccurate SINR reports on the performance of a DPC algorithm. Then, independent variable step-sizes that update the transmit powers are proposed, and convergence of the proposed DPC algorithm to the optimum solution of the original problem is analytically shown. Additionally, a protocol to adaptively tune the step-sizes in our algorithm, which improves the performance of PC in the presence of inaccurate SINR reports, is proposed. Computer simulations are used to study the performance of the proposed method in terms of both the speed of converges and the steady-state accuracy of link qualities. [ABSTRACT FROM PUBLISHER]

Distributed power control over interference limited network has received an increasing intensity of interest over the past few years. Distributed solutions (like the iterative water-filling, gradient projection, etc.) have been intensively investigated under quasi-static channels. However, as such distributed solutions involve iterative updating and explicit message passing, it is unrealistic to assume that the wireless channel remains unchanged during the iterations. Unfortunately, the behavior of those distributed solutions under time-varying channels is in general unknown. In this paper, we shall investigate the distributed scaled gradient projection algorithm (DSGPA) in a K pairs multicarrier interference network under a finite-state Markov channel (FSMC) model. We shall analyze the convergence property as well as tracking performance of the proposed DSGPA. Our analysis shows that the proposed DSGPA converges to a limit region rather than a single point under the FSMC model. We also show that the order of growth of the tracking errors is given by \cal O(1 / \barN), where \barN is the average sojourn time of the FSMC. Based on the analysis, we shall derive the tracking error optimal scaling matrices via Markov decision process modeling. We shall show that the tracking error optimal scaling matrices can be implemented distributively at each transmitter. The numerical results show the superior performance of the proposed DSGPA over three baseline schemes, such as the gradient projection algorithm with a constant stepsize. [ABSTRACT FROM PUBLISHER]