Search

In the current study, a multi-arc predicting model for DC critical flashover voltage of iced and pre-contaminated long insulator strings under low atmospheric pressure is developed. The model is composed of a series of different polarity surface arcs, icicle-icicle air gap arcs, and residual layer resistance. The calculation method of the residual resistance of the ice layer under DC multi-arc condition is established. To validate the model, 7-unit and 15-unit insulator strings were tested in a multi-function artificial climate chamber under the coexistent conditions of low air pressure, pollution, and icing. The test results showed that the values calculated by the model satisfactorily agreed with those experimentally measured, with the errors within the range of 10%, validating the rationality of the model. [ABSTRACT FROM AUTHOR]

The newly constructed Qinghai-Tibet Railway connecting Golumd and Lhasa is the highest railway in the world, which is located on the hinterland of Qinghai-Tibet Plateau with the average altitude of above 4000 m. Therefore, the external insulation of electric equipments will be affected by the atmospheric conditions in the high altitude regions. In contrast to many test investigations in the artificial climate chamber, there are few ones at the high altitude sites of 3000 m and above. In the paper, the ac artificial pollution tests of four types of composite insulators are carried out at three high altitude sites of 2820 m, 3575 m and 4484 m along the Qinghai-Tibet Railway. The test results show that the ac pollution flashover voltages in high altitude regions are affected not only by the pollution grades but also by the atmospheric parameters. The pollution flashover voltages will decrease with the increase of air pressure but increase with the decreases of ambient temperature. The exponent characterizing the influence of equivalent salt deposit density is 0.26 to 0.32 and the exponent characterizing the influence of non-soluble deposit density is 0.12 to 0.16, the influence of non-soluble deposit density cannot be neglected. The exponent characterizing the influence of air pressure is 0.507 to 0.587. The exponent characterizing the influence of ambient temperature is about 0.20. Considering the combined influence of the air pressure and ambient temperature, the ac flashover voltage of the polluted composite insulators will decrease by 4.0% to 6.4% for the altitude increased per 1000 m. [ABSTRACT FROM AUTHOR]

This paper explores the influence of air pressure, temperature and humidity on the switching impulse (SI) flashover performance of different types of clean and dry insulators at different high altitude sites of 2820 m to 5050 m along the Qinghai-Tibet Railway, the highest elevation railway in the world. Seven types of insulators are used in the flashover tests: one is a composite insulator, two are glass insulators and four are porcelain insulators. At the test sites, the ambient temperature varies between 6.7 °C to 28.5 °C and the absolute humidity is between 4.11 g/m³ to 9.69 g/m³. The test results show that the 50% switching impulse flashover voltage of different types of insulators at high altitude sites is independent of the materials and sheds of insulators but has a multi-factor non-linear relation with the shortest arc distance, the dry air pressure, the absolute humidity and the ambient temperature. The relative flashover voltage decreased with the ambient temperature is dependent on the voltage polarity, with 0.152% to 0.165% 1°C for negative SI and 0.099% to 0.108% 1°C for positive SI at the ambient temperature of from 6.7 °C to 28.5 °C. The relative flashover voltage increased with the absolute humidity and is dependent on the air pressure. The higher the altitude is, the more the influence is of the absolute humidity on the flashover voltage of insulators. [ABSTRACT FROM AUTHOR]

A method is introduced for testing insulators under icing conditions. The method is based on and developed from those described in the standard of IEC60-1, IEC 60507 and IEEE Task Force on Insulator Icing Test Methods, which give instructions to test insulators under pollution. Then, the paper explores the effects of various factors, including ice thickness, pollution severity on the surface of insulators before ice accretion, atmospheric pressure, and shed profiles, on the flashover performance of short samples of two different types of silicone rubber (SIR) composite long rod insulators intended for ultra high voltage (UHV) ac transmission lines. The experiments were carried out in the multi-function artificial climate chamber in the High Voltage and Insulation Technological Laboratory of Chongqing University, China. The experimental results reveal the regularity of the effects of ice thickness, pollution severity and atmospheric pressure on the average flashover voltage of two types of composite insulators. Those can provide reference for the outdoor insulation design for UHV ac transmission lines. [ABSTRACT FROM AUTHOR]