Search

The airflow movement inside a multizone building has a significant impact on pollutant transfer, thermal comfort, and indoor air quality. However, there are difficulties in visualizing the airflow movement with existing methods. This study proposes a visualization method for evaluating airflows between adjacent internal zones inside a multizone building based on the analysis of pressure difference frequency. After the distribution of absolute pressure is measured and the wind pressures on the surfaces of the building are calculated, the variation of pressure differences between each couple of adjacent zones is analyzed for three levels: greater than 0 Pa, equal to 0 Pa, and less than 0 Pa (for any given zones selected as target zones). Finally, an airflow mapping is created for each floor using the visNetwork tool based on the R language. A target building was selected for applying the proposed method. The airflow mappings were derived from a detailed analysis of the pressure difference frequency between each couple of adjacent zones, presenting the variations of airflow direction and the dominant airflow during the measurement period in a visualized form. For example, the airflow direction from 1F_Z2 to 1F_Z3 is 92.0%. The spatial similarity in the variations of the airflow directions can also be observed on certain floors. The results of this experimental study show that the airflows between multiple zones can be easily identified without a complex building zone analysis. The variation in internal airflow direction between adjacent zones can be intuitively visualized, providing insight to the airtightness levels of building components. It is also observed that the airflow rates computed based on the airflow mappings can provide more guidance for the control of HVAC systems. [ABSTRACT FROM AUTHOR]

Airflow in a multi-zone building can be a major cause of pollutant transfer, excessive energy consumption, and occupants discomfort. The key to monitoring airflows and mitigating related problems is to obtain a comprehensive understanding of pressure relationships within the buildings. This study proposes a visualization method for representing pressure distribution within a multi-zone building by using a novel pressure-sensing system. The system consists of a Master device and a couple of Slave devices that are connected with each other by a wireless sensor network. A 4-story office building and a 49-story residential building were installed with the system to detect pressure variations. The spatial and numerical mapping relationships of each zone were further determined through grid-forming and coordinate-establishing processes for the building floor plan. Lastly, 2D and 3D visualized pressure mappings of each floor were generated, illustrating the pressure difference and spatial relationship between adjacent zones. It is expected that the pressure mappings derived from this study will allow building operators to intuitively perceive the pressure variations and the spatial layouts of the zones. These mappings also make it possible for operators to diagnose the differences in pressure conditions between adjacent zones and plan a control scheme for the HVAC system more efficiently. [ABSTRACT FROM AUTHOR]