Search

The aim of this study is to compare early and follow-up outcomes of late open conversions (LOC, with complete or partial endograft explantation) and semi-conversions (SC, with endograft preservation) after endovascular aneurysm repair in a multicenter experience.All LOC and SC performed from 1997 to 2020 in 11 vascular centers were compared. Endograft infections or thrombosis were excluded. Primary endpoints were early mortality and long-term survival estimates. Secondary endpoints were differences in postoperative complication rates and conversion-related complications during follow-up.In the considered period, 347 patients underwent surgery for endovascular aneurysm repair complications. Among these, 270 were operated on for endoleaks (222 LOC, 48 SC). The two groups were homogeneous in terms of American Society of Anesthesiologists score (LOC, 3.2 ± 0.7; SC, 3 ± 0.5; P = .128) and main endograft characteristics (suprarenal fixation, bifurcated/aorto-uni-iliac configuration). The mean age was 75 ± 8 years for LOC and 79 ± 7 years for SC (P = .009). Reasons for LOC were: 62.2% (138/222) type I endoleak, 21.6% (48/222) type II endoleak, 7.7% (17/222) type III endoleak, and 8.5% (19/222) endotension. Indications for SC were: 64.6% (31/48) type II endoleak, 33.3% (16/48) type I endoleak, and 2.1% (1/48) type III endoleak. Thirty-day mortality was 12.2% (27/222) in the LOC group, and 10.4% (5/48) in the SC group (P = .73). Postoperative complication rate was higher in the LOC group (45.5% vs 29.2%; P = .04). The estimated survival rate after LOC was 80% at 1 year and 64% at 5 years; after SC, it was 72% at 1 year and 37% at 5 years (log-rank P = .01). During the median follow-up of 21.5 months (interquartile range, 2.4-61 months), an endoleak after SC was found in the 38.3% of the cases; sac growth was recorded in the 27.7% of SC patients.SC has an early benefit over LOC in terms of reduced postoperative complications but has a significantly inferior mid-term survival. The high rates of persistent and/or recurrent endoleaks reduce SC durability.

Objectives: The aim was to report indications, technical aspects, and outcomes of a multicentre experience of late open conversions (LOCs) after endovascular abdominal aneurysm repair (EVAR), in order to identify risk factors which may influence early morbidity and mortality rates, and long term survival. Methods: Ten vascular centres retrospectively reviewed all patients requiring LOC (≥30 days from initial EVAR, undergoing total or partial endograft explantation) from 1996 to 2017. Baseline characteristics, endograft data, indications, procedural details, post-operative outcomes, and follow up data were reviewed and analysed. Results: Included patients totalled 232 (90.1% males, mean age 74.3 ± 7.9 years). The number of LOC per year significantly increased during the study period, reaching 22 in 2017 (correlation r = 0.867, p

PURPOSE: To evaluate the outcome of two vs four implants placed flapless in fully edentulous mandibles and immediately restored with metal-resin screw-retained cross-arch prostheses. MATERIALS AND METHODS: A total of 60 patients from two different centres were randomised: 30 to the fixed-on-2 group and 30 to the fixed-on-4 group according to a parallel group design. To be immediately loaded implants had to be inserted with a minimum torque of 40 Newton/cm (Ncm). Outcome measures were prosthesis and implant failures, complications, and marginal bone level changes. RESULTS: Flaps were raised in 18 patients. Two implants in two patients did not reach the planned insertion torque and were replaced immediately by larger diameter ones. Three years after loading, two patients dropped out from the fixed-on-2 group and one from the fixed-on-4 group. No implant failure or prosthetic failure occurred. A total of 12 fixed-on-2 patients were affected by one complication each vs 13 fixed-on-4 patients. There were no statistically significant differences for complications between groups (difference in proportion = -0.03; 95% CI -29 to 0.22; P [Fisher's exact test] =1.000). There were no statistically significant differences for marginal peri-implant bone loss between the two groups (mean difference = 0.14; CI 95% -0.17 to 0.45; P [ANCOVA] = 0.356), with both groups losing marginal bone in a statistically significant way (1.70 mm for fixed-on-2 implants and 1.56 mm for fixed-on-4 implants). There were statistically significant differences between the two centres, with more bone being lost for the Bologna centre (2.18 vs 1.13 mm; P (ANCOVA)

To evaluate the outcome of two (fixed-on-2 = FO2) versus three (fixed-on-3 = FO3) implants placed flapless in fully edentulous jaws and immediately restored with metal-resin screw-retained crossarch prostheses.Forty edentulous or to be rendered edentulous patients (20 in the maxilla and 20 in the mandible) were randomised to the FO2 group (20 patients: 10 in the maxilla and 10 in the mandible) and to the FO3 group (20 patients: 10 in the maxilla and 10 in the mandible) according to a parallel group design. To be immediately loaded, implants had to be inserted with a minimum torque of 60 Ncm. Outcome measures were prosthesis and implant failures, complications and periimplant marginal bone level changes evaluated up to 1-year post-loading.Flaps were raised in four patients and two prostheses were loaded early at 8 weeks in the FO2 group. One year after loading no dropout or implant failure occurred, however one FO2 maxillary prosthesis had to be remade because of repeated screw-loosening (risk difference = 0.05; 95% CI: -0.05 to 0.15; Fisher's exact test P = 1.000). Three FO2 patients were affected by complications versus five FO3 patients (risk difference = -0.1; 95% CI: -0.35 to 0.15; Fisher's exact test; P = 0.695). There were no statistically significant differences for prosthetic failures and complications between groups. There were no statistically significant differences for marginal peri-implant bone levels between the two groups (estimate of the difference = 0.031 mm; 95% Cl: -0.22 to 0.28; P (ancova) = 0.803), with both groups losing marginal bone in a statistically significant way (0.27 mm for FO2 patients and 0.24 mm for FO3 patients).These preliminary results suggest that immediately loaded cross-arch prostheses can be supported by only two or three dental implants at least up to 1-year post-loading. Longer follow-ups are needed to properly evaluate both these therapeutic options.

PURPOSE: To evaluate the clinical outcome of two implants placed flapless in fully edentulous mandibles and immediately restored with metal-resin screw-retained cross-arch prostheses 5 years after loading. MATERIALS AND METHODS: Eighty consecutive patients were recruited. To be immediately loaded, implants had to be inserted with a minimum torque of 80 Ncm. Forty-six laser-welded titanium and 34 cast silver-palladium frameworks with resin teeth were initially delivered within 8 and 48 h, respectively. Outcome measures, evaluated by two independent assessors included prosthesis and implant failures, complications, marginal bone level changes, implant stability quotient (ISQ) values and patient satisfaction. RESULTS: Five years after loading one patient did not return to the control and 10 prostheses were remade. Two implants failed early in two patients, but they were successfully replaced. Thirty-six complications occurred in 28 patients but were all successfully treated. After 5 years, mean marginal bone loss was 0.69 mm, mean ISQ values decreased from 75.4 to 73.8, and all patients were fully satisfied with the therapy. A post-hoc comparison between the outcome of laser-welded and cast frameworks showed that laser-welded frameworks were affected by significantly more complications (19 patients out of 46 and 6 patients out of 34, respectively; difference in proportion = 0.23, 95% CI: 0.03 to 0.43; Pearson's chi-square test, P = 0.032), therefore such a framework construction should be considered as a long-term temporary prosthesis and not a definitive prosthesis. CONCLUSIONS: Immediately loaded mandibular cross-arch prostheses can be supported by only two implants up to 5 years, if made with a robust cast framework. Longer follow-ups (around 10 years) are still needed to know the prognosis of this treatment modality.

To compare the outcome of cross-arch prostheses supported either by supershort (5 mm) or long (11.5 mm) implants, placed flapless and immediately restored with metal-resin screw-retained cross-arch prostheses.Thirty patients with edentulous (or to be rendered edentulous) mandibles and 30 with edentulous maxillas, who had sufficient bone to allow the placement of four and six implants respectively, which were at least 11.5 mm-long, were randomised according to a parallel group design into 2 equal groups, where they received either 5 mm or 11.5 mm-long implants at one centre. Implants with a diameter of 5 mm, were to be placed flapless with an insertion torque of at least 50 Ncm. Mandibles received four implants between the mental foramina. Implants were to be immediately loaded with metal-resin-definitive prostheses on the same day of implant placement. Patients were followed up to 1 year after loading and the outcome measures were: prosthesis and implant failures, complications, and peri-implant marginal bone level changes.No patients dropped-out. Two prostheses were remade, one on short maxillary implants and one on long mandibular implants. Two 5 mm maxillary implants which did not achieve 50 Ncm torque in soft bone of one patient, but were immediately loaded anyway, failed after 3 weeks compared to one mandibular 11.5 mm-long implant that failed after 60 days. Two complications occurred in each group. There were no statistically significant differences for prosthesis failures, implant failures and complications. Patients with mandibular short implants lost on average 0.08 mm of peri-implant bone at 1 year and patients with long mandibular implants lost 0.51 mm. Patients with short maxillary implants lost on average 0.15 mm of peri-implant bone at 1 year and patients with long maxillary implants lost 0.62 mm. Short implants showed less bone loss when compared to long implants and the differences up to 1 year were statistically significant both in maxillae (mean difference = 0.48 mm, 95% CI 0.22 to 0.73, P = 0.0011) and in mandibles (mean difference = 0.44 mm, 95% CI 0.21 to 0.66, P = 0.0009).Flapless-placed 5 mm-long implants achieved similar results as 11.5 mm-long implants when supporting immediately loaded cross-arch prostheses both in maxillae and mandibles up to 1 year after loading. These preliminary results must be confirmed by other trials, and 5- to 10-year post-loading data is necessary before making reliable recommendations.

Background The purpose of this study was to evaluate our results involving femorocrural bypasses by comparing heparin-bonded expanded polytetrafluoroethylene (HePTFE) graft (Propaten) modified with handmade distal compliant HePTFE cuffs (mHePTFE graft) to great saphenous vein (GSV) graft. Methods A retrospective study involving 74 femorocrural bypasses performed from January 2010 to May 2013 at a single institution was carried out. The indication for revascularization was critical limb ischemia (Rutherford stages 4–6. Forty-one femorocrural bypasses were created in 37 patients with unavailable GSVs using modified ringed HePTFE grafts with a handmade distal radial stretch HePTFE cuff to reduce the mismatch compliance between the graft and the artery wall. Thirty-three femorocrural bypasses were created using a reversed GSV graft. The results were analyzed in terms of primary graft patency, limb salvage, and patient survival using univariate (Kaplan–Meier curves and log-rank test) and multivariate (Cox regression) analyses. Results The 2 groups were statistically comparable for main risk factors, Rutherford stage, and target artery for distal anastomoses. The run-off anatomy did not significantly differ between the prosthetic and the vein bypass group. The cumulative 30-day operative mortality rate was 2.9%. At 1, 2, and 3 years, the 2 groups were equivalent in primary graft patency (the mHePTFE group: 84%, 80%, and 70%, respectively; the GSV group: 84%,71%, and 71%, respectively; P = 0.93) and were also equivalent in terms of limb salvage (the mHePTFE group: 87%, 87%, and 76%, respectively; the GSV group: 84%, 75%, and 75%, respectively; P = 0.78) and patient survival (the mHePTFE group: 87%, 75%, and 75%, respectively; the GSV group: 87%, 73%, and 65%, respectively; P = 0.86). At Cox regression analysis, only postoperative treatment with warfarin therapy compared with double antiplatelet therapy was independently associated with poorer primary patency (P = 0.003; 95% confidence interval, 1.80–18.00; hazard ratio, 5.7). Conclusions In this retrospective study regarding femorocrural bypasses, the mHePTFE grafts had 1-, 2-, and 3-year primary patency and limb salvage results which were not significantly different from those in the GSV grafts. Additional randomized data and larger studies are needed to confirm these results.

To compare the outcome of immediately loaded single implants inserted with medium (from 25 to 35 Ncm) or high insertion torques (80 Ncm).Fifty patients received two single non-adjacent implants, each randomly inserted flapless with a torque between 25 to 35 Ncm or80 Ncm according to a split-mouth design. Non-occluding temporary crowns were immediately placed on provisional abutments and definitive crowns were delivered after 6 weeks. Patients were followed for 6 months after initial loading. Outcome measures were crown/implant failures, complications, peri-implant marginal bone level changes, postoperative pain and presence of peri-implant apical radiolucency.No drop-out occurred. Seven implants inserted with a torque between 25 to 35 Ncm failed versus none of the implants inserted with a torque35 Ncm. With the exception of crown/implant failures (exact McNemar significance P = 0.0156, difference in proportions: -0.12; 95% CI -0.21 to -0.02) there were no statistically significant differences between groups for the other outcome measures.It is preferable to insert single implants with a high insertion torque (80 Ncm), to minimise early implant failures, when loading them immediately.

PURPOSE: To evaluate the outcome of 2 versus 4 implants placed flapless in fully edentulous mandibles and immediately restored with metal-resin screw-retained cross-arch prostheses. MATERIALS AND METHODS: Sixty patients from two different centres were randomised: 30 to the allon- 2 group and 30 to the all-on-4 group according to a parallel group design. To be immediately loaded, implants had to be inserted with a minimum torque of 40 Ncm. Outcome measures were prosthesis and implant failures, complications, and marginal bone level changes. RESULTS: Flaps were raised in 18 patients. A total of 2 implants in 2 patients did not reach the planned insertion torque and were immediately replaced by larger diameter ones. One year after loading, no drop-out or implant failure occurred. Eight biomechanical complications occurred in the all-on-2 group versus 8 complications in the all-on-4 group. There were no statistically significant differences for complications between groups. There were no statistically significant differences for marginal peri-implant bone levels between the two groups (estimate of the difference = -0.16; 95%CI -0.40 to 0.08; P (ANCOVA) = 0.074), with both groups losing a statistically significant amount of marginal bone (0.74 mm for all-on-2 implants and 0.58 mm for all-on-4 implants). There were statistically significant differences between the two centres, with more bone being lost for the Bologna centre (0.26 mm versus 1.07 mm). CONCLUSIONS: These preliminary results, up to 1 year after loading, suggest that immediately loaded mandibular cross-arch fixed prostheses can be supported by only 2 dental implants. Longer followups (approximately 10 years) are needed to properly evaluate this therapeutic option.

To evaluate the clinical outcome of 2 implants placed flapless in fully edentulous mandibles and immediately restored with a metal-resin screw-retained cross-arch prosthesis 1 year after loading.Eighty consecutive patients were recruited. To be immediately loaded, implants had to be inserted with a minimum torque of 80 Ncm. Outcome measures, evaluated by two independent assessors, were prosthesis and implant failures, complications, marginal bone level changes, implant stability quotient (ISQ) values and patient satisfaction.Flaps were raised in 7 patients. Twelve implants in 7 patients did not reach the planned insertion torque. Four implants in 3 patients were immediately replaced by larger diameter implants and achieved the desired torque, whereas the remaining implants were immediately loaded anyway. Two implants failed early in 2 patients, but were successfully replaced and their prostheses remade. One month after loading, 72 (90%) patients declared to be completely satisfied with the therapy, 7 (9%) partially satisfied and 1 (1%) unsatisfied. One year after loading, all prostheses were in function, though one patient did not attend the 1-year control. Eight (10%) complications occurred, all successfully treated. After 1 year, the mean marginal bone loss was 0.3 mm and mean ISQ values decreased from 75.4 to 72.4.These short-term results at 1 year after loading suggest that immediately loaded mandibular cross-arch fixed prostheses can be supported by only 2 dental implants. Longer follow-ups (around 10 years) are needed to know the prognosis of this treatment modality.

To evaluate the efficacy of immediate loading versus early loading at 6 weeks of bar-retained mandibular overdentures supported by two implants placed with a flapless technique.Sixty patients were randomised: 30 to the immediately loaded group and 30 to the early loaded group. To be immediately loaded, implants had to be inserted with a minimum torque48 Ncm. Outcome measures were prosthesis and implant failures, biological and biomechanical complications, patient satisfaction, and Implant Stability Quotient (ISQ) assessed with a resonance frequency analysis instrument.Sixty implants were placed in each group. Flaps had to be raised in nine patients to check drill direction or to better visualise the area after multiple teeth extraction. Two implants in two patients did not reach the planned insertion torque and were immediately replaced by larger diameters ones. After 1 year no drop out occurred and two early loaded implants failed in two patients. There were no statistically significant differences between groups for prosthesis failures, implant losses, complications, and mean ISQ values; however, patients in the immediately loaded group were significantly more satisfied than those loaded early. When comparing mean ISQ values taken 6 weeks after placement with 1-year data within each group, values decreased significantly.Mandibular overdentures can be successfully loaded the same day of implant placement with a minimally invasive surgery, increasing patient satisfaction while decreasing treatment time and patient discomfort. No apparent advantages were seen when loading the overdentures at 6 weeks.

To evaluate the efficacy of flapless placed implants immediately or early loaded at 2 months with full-arch prostheses.Thirty patients were randomised: 15 to the immediately loaded group and 15 to the early loaded group. All implants had to be inserted with a minimum torque48 Ncm. Outcome measures were prosthesis and implant failures, biological and biomechanical complications, peri-implant marginal bone level changes, patient satisfaction and implant stability quotient (ISQ) assessed with a resonance frequency analysis instrument.Ninety implants were placed in the immediately loaded and 87 in the early loaded group. Four localised flaps had to be elevated. Six implants in five patients did not reach the planned insertion torque. Four were immediately replaced by larger diameters ones, one was early loaded and another removed just after placement. After 1 year no drop-out occurred. One implant failed in the immediately loaded group versus three early loaded implants in two patients. There were no statistically significant differences between groups for implant losses, complications, and mean marginal bone level changes. There were borderline significant differences for mean ISQ values, and patients in the immediately loaded group were significantly more satisfied than those early loaded. When comparing mean ISQ values taken 2 months after placement with year 1 data within each group, values increased significantly.Maxillary cross-arch prostheses can be successfully loaded the same day of flapless implant placement, increasing patient satisfaction while decreasing treatment time and patient discomfort. No apparent advantages were seen when loading implants at 2 months.

To evaluate success rates and complications of implants placed with a flapless technique and immediately loaded in fully edentulous maxillae.Implants were placed in fully edentulous maxillae with a minimum insertion torque of 45 Ncm in underprepared sites to allow maximum stability at insertion using a flapless technique. Implants were immediately loaded. Outcome measures were prosthesis and implant success, biologic and prosthetic complications, pain, and edema evaluation. Stability of individual implants was assessed both manually and with Osstell at baseline and after 12 months of loading. A single sample t test was used with a significance level of .05.Thirty-three consecutively treated edentulous patients received 202 implants in the maxilla. In 10 patients, 53 implants were immediately inserted in fresh extraction sockets. At implant insertion, a flap had to be elevated to control the direction of the drill in 5 patients. Three implants in 2 patients did not reach sufficient stability and were left to heal for 45 to 90 days. All restorations (21 fixed prostheses and 12 overdentures) were delivered the same day of the surgery. Twenty-six patients experienced no or slight postoperative pain; 7 experienced moderate to severe pain. No or slight edema was recorded for 19 patients and moderate to severe edema for 14 patients. Two implants failed in 2 patients but were successfully replaced the same day they were removed. No major complications occurred. Five patients experienced biologic complications, eg, peri-implantitis; 10 experienced prosthetic complications. No prosthesis failed; however, 1 patient was unsatisfied with his overdenture and requested a fixed alternative. There was a highly significant difference (P.001) between the stability at implant insertion and after 12 months.Implants placed in the edentulous maxilla with a flapless procedure can be successfully loaded the same day of surgery.

The aim of this study was to determine the clinical effectiveness of placing dental implants with microtextured surfaces into full occlusal loading at the time of placement in partially edentulous patients.Two demographically similar groups of 14 patients each were treated with a total of 92 Spline Twist Implants (Centerpulse Dental, Carlsbad, CA). Test implants were placed into immediate full occlusal loading, and control implants were restored using a conventional delayed loading procedure. Otherwise, both groups of patients received similar therapy from the same treatment team. Radiographs, periodontal indices, and Periotest values were recorded every 6 months during routine clinical follow-up appointments. The mean loading time for all prostheses was 24 months at the time of this report.No implants failed in the test group, and 1 implant failed before loading in the control group. Cumulative implant success was 98.9% for all implants placed (test group = 100%; control group = 92.9%). Periodontal measurements indicated no significant clinical differences between implants placed into immediate full occlusal loading and those loaded via a conventional delayed protocol.Immediate full occlusal loading of partial prostheses supported by microtextured implants in partially edentulous patients demonstrated excellent clinical results, with no adverse periodontal effects after 24 months of function. Additional follow-up will provide invaluable information on the long-term effects of this technique.Immediate full occlusal loading of partial prostheses supported by microtextured implants can be successfully achieved for 24 months in highly motivated patients with excellent oral hygiene.