Search

For this study, ion-eroded cement was prepared from the cement required for construction of middle- and low-level radioactive waste repositories in caves. The properties for adsorption of 137Cs on cement before and after ion erosion were investigated. XRF, XRD, SEM–EDS and BET were used to analyse various cement materials. The effects of reaction time, solid–liquid ratio, initial radioactivity and different ions on adsorption were studied by static batch experiments. When the initial radioactivity was 1114.5 Bq L−1 and the solid–liquid ratio was 5 g L−1, the adsorption equilibrium time was 12 h. Adsorption of 137Cs on ion-eroded cement was more effective than that on untreated cement. The adsorption process was consistent with the pseudosecond-order kinetic model and the Freundlich isotherm model, and the process involved multilayer chemisorption. This study provides basic research data for construction of a disposal repository. [ABSTRACT FROM AUTHOR]

The preparation of C30 concrete for a cavernous waste repository under construction in China and its Cs(I) adsorption performance were investigated. The mix ratio of C30 concrete was cement:sand:gravel:water = 1:1.87:3.05:0.55. Three characterization analyses showed that C30 concrete has a good crystal structure, a large specific surface area and the presence of many –OH, HCO3−, CO32−, SiO42− groups and other groups. Adsorption experiments showed that the adsorption equilibrium was reached within 4 h, and pH had little effect on adsorption; several ions (K+, Ca2+, Mg2+, Cl−, NO3−, and SO42−) inhibited adsorption. The adsorption was more in line with the pseudo-second-order kinetic model and the Langmuir isothermal model. Thermodynamic analysis indicates that adsorption is endothermic and stochastic. [ABSTRACT FROM AUTHOR]

A kind of amino-functionalized clay was prepared by grafting APTES from clay in the Alxa area (Inner Mongolia, China), and its application for the U(VI) removal from Alxa groundwater was studied in this work. The results indicate that the sorption strongly depended on the pH and ions. The presence of amino functional groups significantly enhances the adsorption of uranium on clay in groundwater. The sorption isotherms fitted well with the Langmuir model, whereas the sorption kinetics could be fitted by a pseudo-second-order model. These findings indicate that amino-functionalized clay can effectively adsorb U(VI) in complex groundwater samples. [ABSTRACT FROM AUTHOR]

Montmorillonite colloid was synthesized and characterized and the adsorption of U(VI) on colloid as a function of contact time, temperature, initial concentration of U(VI) solution, pH and foreign ions was investigated through batch experiments. The results illustrate that the adsorption reaches equilibrium quickly within 30 mins. Results showed that the absorption process is influenced by pH value, temperature and ions, among which pH value is the most significant. Adsorption percentage increases obviously at pH = 4.0–7.0, and then decreases with the increase of pH value. The competitive cations also inhibit the adsorption. pH value and ions affect the surface properties and charges of the colloid and the chemical form of nuclides. The experimental data was analyzed in detail. The maximum adsorption capacity obtained by fitting the second-order kinetic model is very close to the experimental data. The Langmuir model fits the experimental data better than Freundlich models, R2 = 0.991. The results of fitting two adsorption isotherms show that the adsorption of colloids on uranium has both physical and chemical adsorption, and is mainly monolayer adsorption. Furthermore, the adsorption process is a spontaneous endothermic reaction by calculating the thermodynamic parameters. This experiment can provide some data basis for the adsorption study of U(VI) on colloids. [ABSTRACT FROM AUTHOR]