Search

The adsorption of two acidic pharmaceutically active compounds (PhACs), clofibric acid and ketoprofen, onto powdered activated carbon (PAC) was investigated with a particular focus on the influence of natural organic matter (NOM) on the adsorption of the PhACs. Suwannee River humic acids (SRHAs) were used as a substitute for NOM. Batch adsorption experiments were conducted to obtain adsorption kinetics and adsorption isotherms with and without SRHAs in the system. The adsorption isotherms and adsorption kinetics showed that the adsorption of clofibric acid was not significantly affected by the presence of SRHAs at a concentration of 5 mg (as carbon) L−1. An adsorption capacity of 70 to 140 mg g−1 was observed and equilibrium was reached within 48 h. In contrast, the adsorption of ketoprofen was markedly decreased (from about 120 mg g−1 to 70–100 mg g−1) in the presence of SRHAs. Higher initial concentrations of clofibric acid than ketoprofen during testing may explain the different behaviours that were observed. Also, the more hydrophobic ketoprofen molecules may have less affinity for PAC when humic acids (which are hydrophilic) are present. The possible intermolecular forces that could account for the different behaviour of clofibric acid and ketoprofen adsorption onto PAC are discussed. In particular, the relevance of electrostatic forces, electron donor-acceptor interaction, hydrogen bonding and London dispersion forces are discussed [ABSTRACT FROM PUBLISHER]

[Display omitted] • Fe-Kapok has been made by easy hydrothermal method. • Fe-Kapok showed Fe positive impact for As (V) removal. • High and fast As (V) adsorption. • Fe-Kapok could be regenerated and reused several times. Arsenic (As) is one of the most toxic metals for human health. In the present work, kapok fibers were modified using iron Fe(III) to enhance As(V) adsorption and then characterized using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) combined with energy dispersive X-ray spectroscopy (EDS). The impacts of pH, dose of adsorbent, contact time, initial concentration, temperature, and coexisting ions on the adsorption of As(V) onto Fe-modified kapok fiber (Fe-kapok) surfaces were investigated. The results showed that the adsorption process fit more to the Langmuir isotherm equation and pseudo second kinetic equation, thus demonstrating that the adsorption was an endothermic, spontaneous, monolayer chemisorption process with some disorder at the solid/solution interface. The adsorption process was controlled by the film diffusion step, and the maximum adsorption capacity of Fe-kapok was calculated to be approximately 367 µg/g. Further study showed that after 8 adsorption/desorption cycles with 1 regeneration cycle, Fe-kapok was still able to remove 45% of the arsenic (100 µg/L) present in the water. A notable negative impact on the removal of As(V) from water was linked to the concentrations of SO 4 2- and PO 4 3- in the water. [ABSTRACT FROM AUTHOR]