Search

Adsorption behavior of a gold binding peptide was experimentally studied to achieve kinetics and thermodynamics parameters toward understanding of the binding of an engineered peptide onto a solid metal surface. The gold-binding peptide, GBP1, was originally selected using a cell surface display library and contains 14 amino acid residues. In this work, single- and three-repeats of GBP1 were used to assess the effects of two parameters: molecular architecture versus secondary structure on adsorption on to gold substrate. The adsorption measurements were carried out using surface plasmon resonance (SPR) spectroscopy at temperatures ranging from 10 to 55 °C. At all temperatures, two different regimes of peptide adsorption were observed, which, based on the model, correspond to two sets of thermodynamics values. The values of enthalpy, ΔH(ads), and entropy, ΔS(ads), in these two regimes were determined using the van't Hoff approach and Gibbs-Helmholtz relationship. In general, the values of enthalpy for both peptides are negative indicating GBP1 binding to gold is an exothermic phenomenon and that the binding of three repeat gold binding peptide (3l-GBP1) is almost 5 times tighter than that for the single repeat (l-GBP1). More intriguing result is that the entropy of adsorption for the 3l-GBP1 is negative (-43.4 ± 8.5 cal/(mol K)), while that for the l-GBP1 is positive (10.90 ± 1.3 cal/(mol K)). Among a number of factors that synergistically contribute to the decrease of entropy, long-range ordered self-assembly of the 3l-GBP1 on gold surface is the most effective, probably through both peptide-solid and peptide-peptide intermolecular interactions. Additional adsorption experiments were conducted in the presence of 2,2,2-trifluoroethanol (TFE) to determine how the conformational structures of the biomolecules responded to the environmental perturbation. We found that the peptides differ in their conformational responses to the change in solution conditions; while l-GBP does not fold in the presence of TFE, 3l-GBP1 adopted two types of secondary structure (β-strand, α-helix) and that peptide's binding to the solid is enhanced by the presence of low percentages of TFE solvent. Not only do these kinetics and thermodynamics results provide adsorption behavior and binding of genetically engineered peptides for inorganics (GEPI), but they could also provide considerable insights into fundamental understanding peptide molecular recognition and their selective specificity for the solids. Moreover, comprehensive work described herein suggests that multiple repeat forms of the solid binding peptides possess a conformational component that can be exploited to further tailor affinity and binding of a given sequence to a solid material followed by ordered assembly as a convenient tool in future practical applications.

Binding kinetics of platinum-, silica-, and gold-binding peptides were investigated using a modified surface plasmon resonance spectroscopy (SPR). Platinum binding septa-peptides, quartz-binding dodecapeptides, and gold-binding 14-aa peptides were originally selected using phage or cell surface display libraries using the mineral or pure forms of these materials. All of the peptides were synthesized singly to investigate their binding kinetics and to assess quantitatively the specific affinity of each to its material of selection. The peptides were also postselection engineered to contain multiple copies of the same original sequences to quantify the effects of repeating units. SPR spectroscopy, normally using gold surfaces, was modified to contain a thin film (a few nm thick) of the material of interest (silica or platinum) on gold to allow the quantitative study of the adsorption kinetics of specific solid-binding peptides. The SPR experiments, carried out at different concentrations, on all three materials substrates, resulted in Langmuir behavior that allowed the determination of the kinetic parameters, including adsorption, desorption, and equilibrium binding constants for each of the solids as well as free energy of adsorption. Furthermore, we also tested multiple repeats of the peptide sequences, specifically three repeats, to see if there is a general trend of increased binding with increased number of binding domains. There was no general trend in the binding strength of the peptides with the increase of the repeat units from one to three, possibly because of the conformational changes between the single and multiple repeat polypeptides. In all cases, however, the binding was strong enough to suggest that these inorganic binding peptides could potentially be used as specific molecular linkers to bind molecular entities to specific solid substrates due to their surface recognition characteristics.

Despite extensive recent reports on combinatorially selected inorganic-binding peptides and their bionanotechnological utility as synthesizers and molecular linkers, there is still only limited knowledge about the molecular mechanisms of peptide binding to solid surfaces. There is, therefore, much work that needs to be carried out in terms of both the fundamentals of solid-binding kinetics of peptides and the effects of peptide primary and secondary structures on their recognition and binding to solid materials. Here we discuss the effects of constraints imposed on FliTrx-selected gold-binding peptide molecular structures upon their quantitative gold-binding affinity. We first selected two novel gold-binding peptide (AuBP) sequences using a FliTrx random peptide display library. These were, then, synthesized in two different forms: cyclic (c), reproducing the original FliTrx gold-binding sequence as displayed on bacterial cells, and linear (l) dodecapeptide gold-binding sequences. All four gold-binding peptides were then analyzed for their adsorption behavior using surface plasmon resonance spectroscopy. The peptides exhibit a range of binding affinities to and adsorption kinetics on gold surfaces, with the equilibrium constant, Keq, varying from 2.5x10(6) to 13.5x10(6) M(-1). Both circular dichroism and molecular mechanics/energy minimization studies reveal that each of the four peptides has various degrees of random coil and polyproline type II molecular conformations in solution. We found that AuBP1 retained its molecular conformation in both the c- and l-forms, and this is reflected in having similar adsorption behavior. On the other hand, the c- and l-forms of AuBP2 have different molecular structures, leading to differences in their gold-binding affinities.

Titanium (Ti) and its alloys are among the most successful implantable materials for dental and orthopedic applications. The combination of excellent mechanical and corrosion resistance properties makes them highly desirable as endosseous implants that can withstand a demanding biomechanical environment. Yet, the success of the implant depends on its osteointegration, which is modulated by the biological reactions occurring at the interface of the implant. A recent development for improving biological responses on the Ti-implant surface has been the realization that bifunctional peptides can impart material binding specificity not only because of their molecular recognition of the inorganic material surface, but also through their self-assembly and ease of biological conjugation properties. To assess peptide-based functionalization on bioactivity, the present authors generated a set of peptides for implant-grade Ti, using cell surface display methods. Out of 60 unique peptides selected by this method, two of the strongest titanium binding peptides, TiBP1 and TiBP2, were further characterized for molecular structure and adsorption properties. These two peptides demonstrated unique, but similar molecular conformations different from that of a weak binder peptide, TiBP60. Adsorption measurements on a Ti surface revealed that their disassociation constants were 15-fold less than TiBP60. Their flexible and modular use in biological surface functionalization were demonstrated by conjugating them with an integrin recognizing peptide motif, RGDS. The functionalization of the Ti surface by the selected peptides significantly enhanced the bioactivity of osteoblast and fibroblast cells on implant-grade materials.

Recently, phage and cell-surface display libraries have been adapted for genetically selecting short peptides for a variety of inorganic materials. Despite the enormous number of inorganic-binding peptides reported and their bionanotechnological utility as synthesizers and molecular linkers, there is still a limited understanding of molecular mechanisms of peptide recognition of and binding to solid materials. As part of our goal of genetically designing these peptides, understanding the binding kinetics and thermodynamics, and using the peptides as molecular erectors, in this report we discuss molecular structural constraints imposed upon the quantitative binding characteristics of peptides with an affinity for inorganics. Specifically, we use a high-affinity seven amino acid Pt-binding sequence, PTSTGQA, as we reported in earlier studies and build two constructs: one is a Cys-Cys constrained "loop" sequence (CPTSTGQAC) that mimics the domain used in the pIII tail sequence of the phage library construction, and the second is the linear form, a septapeptide, without the loop. Both sequences were analyzed for their adsorption behavior on Pt thin films by surface plasmon resonance (SPR) spectroscopy and for their conformational properties by circular dichroism (CD). We find that the cyclic peptide of the integral Pt-binding sequence possesses single or 1:1 Langmuir adsorption behavior and displays equilibrium and adsorption rate constants that are significantly larger than those obtained for the linear form. Conversely, the linear form exhibits biexponential Langmuir isotherm behavior with slower and weaker binding. Furthermore, the structure of the cyclic version was found to adopt a random coil molecular conformation, whereas the linear version adopts a polyproline type II conformation in equilibrium with the random coil. The 2,2,2-trifluoroethanol titration experiments indicate that TFE has a different effect on the secondary structures of the linear and cyclic versions of the Pt binding sequence. We conclude that the presence of the Cys-Cys restraint affects both the conformation and binding behavior of the integral Pt-binding septapeptide sequence and that the presence or absence of constraints could be used to tune the adsorption and structural features of inorganic binding peptide sequences.