Search

Diverse types of dental adhesives exhibit different cytotoxic outcomes on cells in vitro. Currently, no standard adhesive application technique has so far been decisive for clinicians for better durability of resin-dentin bonds of adhesive systems. The purpose of this study was to systematically review the literature to evaluate the bonding performance of adhesive systems to dentin by using different application modalities. The systematic research strategy was conducted by two reviewers among multiple databases: PubMed, Scopus, Web of Science, Embase, and Scielo. In vitro studies reporting the effects of additional steps for the application of adhesive systems on the bond strength to dentin were selected. Meta-analysis was performed using Review Manager Software version 5.3.5 using the random effects model. The methodological quality of each in vitro study was assessed according to the parameters of a previous systematic review. The electronic research through different databases generated a total of 8318 references. After the examination of titles and abstracts, a total of 106 potentially relevant studies accessed the full-text evaluation phase. After full-text examination, 78 publications were included for the qualitative analysis, and 68 studies were included in the meta-analysis. Regarding the etch-and-rinse adhesive systems, the application modalities that improved the overall bond strength were the application of a hydrophobic resin layer ( p = 0.005), an extended application time ( p < 0.001), an application assisted by an electric current ( p < 0.001), a double-layer application ( p = 0.05), the agitation technique ( p = 0.02), and the active application of the adhesive ( p < 0.001). For self-etch adhesive systems, the techniques that improved the overall bond strength were the application of a hydrophobic resin layer ( p < 0.001), an extended application time ( p = 0.001), an application assisted by an electric current ( p < 0.001), a double-layer application ( p < 0.001), the agitation technique ( p = 0.01), and the active application of the adhesive ( p < 0.001). The in vitro evidence suggests that the application of adhesive systems using alternative techniques or additional strategies may be beneficial for improving their bond strength to dentin. The application modalities that favored the overall bond strength to dentin were an extended application time, a double-layer application, an application assisted by an electric current, the active application of the adhesive, and the application of a hydrophobic resin layer. Worth mentioning is that some techniques are intended to increase the degree of the conversion of the materials, and therefore, improvements in the biocompatibility of the materials can be expected.

Dental plaque is a biofilm composed of a complex oral microbial community. The accumulation of plaque in the pit and fissures of dental elements often leads to the development of tooth decay (dental caries). Here, potent anti-biofilm materials were developed by incorporating zinc methacrylates or di-n-butyl-dimethacrylate-tin into the light-curable sealant and their physical, mechanical, and biological properties were evaluated. The data revealed that 5% di-n-butyl-dimethacrylate-tin (SnM 5%) incorporated sealant showed strong anti-biofilm efficacy against various single-species ( Streptococcus mutans or Streptococcus oralis or Candida albicans ) and S. mutans - C. albicans cross-kingdom dual-species biofilms without either impairing the mechanical properties of the sealant or causing cytotoxicities against mouse fibroblasts. The findings indicate that the incorporation of SnM 5% in the experimental pit and fissure self-adhesive sealant may have the potential to be part of current chemotherapeutic strategies to prevent the formation of cariogenic oral biofilms that cause dental caries.

Solvent evaporation within an adhesive layer is a crucial step during a bonding process. The aim of this current research was to test whether the use of different air temperatures (20 °C, 40 °C, and 60 °C) for solvent evaporation improves the performance of four adhesive systems to dentin. Sixty non-carious human molar teeth were randomly prepared for micro-tensile bond strength (μTBS) tests. Four different adhesive systems, Prime&Bond Universal (PBU), OptiBond Universal (OBU), OptiBond FL (OBFL), and Clearfil SE (CSE), were applied following the manufacturer's instructions. Three groups based on the air-drying temperature were used: solvent evaporation was performed with either of warm (40 °C), (60 °C), and cold air as control group (20 °C) for 10 s at a distance of 5 cm. In all bonded surfaces, three resin composite (Reflectys, Itena Clinical, Paris, France) layers of 2 mm thickness were built up. The resin–dentin samples were kept in distilled water at 37 °C for 24 h and 6 months, respectively, before μTBS testing. Failure analysis, scanning electron microscopy of resin–dentin bonded interface, and solvent evaporation rate were tested as secondary variables. All analyses were conducted using a significance level of α = 0.05. Bond strength (BS) values were similar among all the adhesive systems used (p > 0.05). Also, the aging factor did not affect the BS (p > 0.05). Only the factor of temperature used for solvent evaporation resulted in a statistically significant effect (p < 0.05), with the temperature of 60 °C being the highest value (p < 0.05). A failure mode evaluation revealed mostly adhesive or mixed modes of failures in all the different temperatures of air used for the solvent evaporation of each adhesive system. The thickness of the adhesive layer and the creation of resin tags varied amongst the temperatures evaluated. For all adhesive systems tested, the use of 40 °C or 60 °C air for solvent evaporation led to an increased mass loss. Warmer temperatures for solvent evaporation contributed positively to bonding performance, enhancing both the quality of the adhesive layer and its interaction with the dentin tissue. Optimizing solvent evaporation with warmer air temperatures (40 °C and 60 °C) significantly improved µTBS, offering a practical means to enhance the quality and longevity of adhesive restorations in esthetic dentistry. [ABSTRACT FROM AUTHOR]

One of the major goals of adhesive dentistry is to improve the interaction of the already-existing adhesives with different substrates by using different application techniques. Thus, the objective of the present in vitro study was to assess the bond performance of four adhesive systems, Prime&Bond Universal (PBU), Clearfil SE Bond (CSE), OptiBond Universal (OBU), and OptiBond FL (OBFL), to dentin using various application modes: passive application (PA), active application (AA), Compo-Vibes modified application (CVM), and Compo-Vibes application (CV). Eighty extracted human molars were allocated into four groups based on the application modalities tested. The micro-tensile bond strength as well as fracture mode were tested in accordance with ISO/TS 11.405 after 24 h and 6 months of aging. Adhesive contact angle (CA) and scanning electron microscope analysis were also performed (n = 3). Statistical tests were performed with α = 0.05. After 24 h, a significant difference with a higher bond strength value was found for PBU in the AA modality and for CSE in the CVM modality (p < 0.05). However, no significant difference was shown between the techniques used among the other adhesives (OBFL and OBU). Moreover, at 24 h, only the PA demonstrated significant differences between the tested materials (p < 0.05). After 6 months, CSE, PBU, and OBU demonstrated significant differences between the techniques (p < 0.05), with a higher bond strength for CSE in AA and CVM modalities, for PBU in AA modality, and for OBU in AA and PA modalities. No significant differences were found between the techniques used among the OBFL (p > 0.05). In addition, only the CVM technique demonstrated significant differences between the tested materials after 6 months. CV and CVM showed a decreased value after aging for CSE and PBU, respectively. However, all the modalities decreased for OBU and OBFL after aging. All the adhesives showed marked resin infiltration into dentinal tubules in AA among all the modalities tested. Both universal adhesive systems (OBU and PBU) demonstrated statistically lower CA when compared to the other systems (CSE and OBFL) (p < 0.05) when applied in the PA mode. Concerning the AA mode, only CSE and OBFL were tested. The AA demonstrated lower CA values compared to the same adhesives in PA (p < 0.05). It could be concluded that the bond strength could be influenced by both materials and application techniques. It seems that the AA technique could be recommended as a gold standard for the application of an adhesive system to dentin. Plus, the CV and CVM modalities after 6 months of aging were considered stable for PBU and CSE, respectively. Consequently, the performance of these adhesive systems might vary when applied to other modalities. Future studies are needed to test this hypothesis. [ABSTRACT FROM AUTHOR]

Any excess solvent from dental adhesive systems must be eliminated prior to material photopolymerization. For this purpose, numerous approaches have been proposed, including the use of a warm air stream. This study aimed to investigate the effect of different temperatures of warm air blowing used for solvent evaporation on the bond strength of resin-based materials to dental and nondental substrates. Two different reviewers screened the literature in diverse electronic databases. In vitro studies recording the effect of warm air blowing to evaporate solvents of adhesive systems on the bond strength of resin-based materials to direct and indirect substrates were included. A total of 6626 articles were retrieved from all databases. From this, 28 articles were included in the qualitative analysis, and 27 remained for the quantitative analysis. The results of the meta-analysis for etch-and-rinse adhesives revealed that the use of warm air for solvent evaporation was statistically significantly higher (p = 0.005). For self-etch adhesives and silane-based materials, this effect was observed too (p < 0.001). The use of a warm air stream for solvent evaporation enhanced the bonding performance of alcohol-/water-based adhesive systems for dentin. This effect seems to be similar when a silane coupling agent is submitted to a heat treatment before the cementation of a glass-based ceramic. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate through a systematic review and meta-analysis whether the immediate and long-term bonding performance of universal adhesives would be improved by prior acid etching. Materials and Methods: Two reviewers performed a literature search up to April 2018 in eight databases: PubMed, Web of Science, Cochrane Library, SciELO, Scopus, LILACS, IBECS, and BBO. Only studies that evaluated the dentin or enamel bond strength of universal adhesives using a self-etch or etch-and-rinse strategy were included. Analyses were carried out using RevMan 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). A global analysis comparing self-etch or etch-and-rinse strategies and the influence of aging on bonding performance was performed with random-effects models at a significance level of p < 0.05. Results: A total of 59 in vitro studies were included in the meta-analysis. The enamel bond strength of universal adhesives was improved by the etch-and-rinse approach (p < 0.05). In dentin, this effect was observed for ultramild and intermediately strong universal adhesives (p < 0.05). Irrespective of the strategy employed, intermediately strong adhesives showed a decrease in bond strength after all types of aging. This effect was also observed for ultra- mild universal adhesives used in the etch-and-rinse approach (p < 0.05). Mild universal adhesives showed bond strength stability in both strategies (p > 0.05). Conclusions: The in vitro evidence suggests that bonding performance of mild universal adhesives can be improved by using the selective enamel-etch strategy. Mild universal adhesives seem to be the more stable materials, in both etch-and-rinse or self-etch strategies. [ABSTRACT FROM AUTHOR]

This study aimed to identify the role of crosslinking agents in the resin–dentin bond strength (BS) when used as modifiers in adhesives or pretreatments to the dentin surface through a systematic review and meta-analysis. This paper was conducted according to the directions of the PRISMA 2020 statement. The research question of this review was: "Would the use of crosslinkers agents improve the BS of resin-based materials to dentin?" The literature search was conducted in the following databases: Embase, PubMed, Scielo, Scopus, and Web of Science. Manuscripts that reported the effect on the BS after the use of crosslinking agents were included. The meta-analyses were performed using Review Manager v5.4.1. The comparisons were performed by comparing the standardized mean difference between the BS values obtained using the crosslinker agent or the control group. The subgroup comparisons were performed based on the adhesive strategy used (total-etch or self-etch). The immediate and long-term data were analyzed separately. A total of 50 articles were included in the qualitative analysis, while 45 articles were considered for the quantitative analysis. The meta-analysis suggested that pretreatment with epigallocatechin-3-gallate (EGCG), carbodiimide, ethylenediaminetetraacetic acid (EDTA), glutaraldehyde, and riboflavin crosslinking agents improved the long-term BS of resin composites to dentin (p ≤ 0.02). On the other hand, the use of proanthocyanidins as a pretreatment improved both the immediate and long-term BS values (p ≤ 0.02). When incorporated within the adhesive formulation, only glutaraldehyde, riboflavin, and EGCG improved the long-term BS to dentin. It could be concluded that the application of different crosslinking agents such as carbodiimide, EDTA, glutaraldehyde, riboflavin, and EGCG improved the long-term BS of adhesive systems to dentin. This effect was observed when these crosslinkers were used as a separate step and when incorporated within the formulation of the adhesive system. [ABSTRACT FROM AUTHOR]

The objective was to evaluate the influence of active bonding applications (ABA) for different time intervals after selective dentin etching (SDE) for 3 s on the microtensile bond strength (μTBS) to dentin of two universal adhesive systems (UAs): one containing 2-hydroxyethyl methacrylate (HEMA) (Scotchbond Universal, SBU), and one that was HEMA-free (Prime&Bond Universal, PBU). Dentin bovine specimens were divided into four groups: self-etch as control (SE), SDE + ABA for 15 s (SDE15), SDE + ABA for 20 s (SDE20), and SDE + ABA for 25 s (SDE25). The μTBS test was performed after a water storage of 24 h and 6 months. Scanning electron microscopy (SEM) was used in order to examine the resin–dentin interface. For the PBU, the µTBS was significantly influenced only by the aging factor (p < 0.026). A statistically significant decrease in the µTBS after 6 months of aging was observed only for the SDE15 group. For SBU, µTBS was significantly influenced by the protocol application and the aging time (p ≤ 0.041). The groups SDE15, SDE20, and SDE25 achieved statistically significant higher values (after 24 h and 6 months). No considerable variances were noticed in the homogeneity and continuity of the hybrid layer (HL) among the groups. In conclusion, SDE and ABA improved the µTBS only of a HEMA-containing universal adhesive. [ABSTRACT FROM AUTHOR]

In this study, the cytotoxicity of different combinations of contemporary resin‐based restoratives (adhesives, composites, luting agents) against human keratinocytes (HaCaT) was evaluated under two conditions, whether materials were applied to dentin or not. Adhesives (3‐step etch‐and‐rinse/3ER: OptiBond FL; 2‐step self‐etch/2SE Clearfil SE Bond; Single Bond Universal/UNI), composites (conventional composite resin/CCR: Filtek Z350XT; flowable/FCR: Filtek Z350XT Flow; self‐adhesive composite resin/SACR: Dyad Flow), and luting agents (conventional luting agent/CLA: Variolink‐II; self‐adhesive luting agent/SLA: RelyXU200) were combined according to their clinical use. Eluates from polymerized specimens applied to dentin were placed in contact with cells grown for 1 and 7 d. The controls were defined by cells without material contact. Cell viability was determined using MTT [3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide)] assay. C=C conversion was investigated using Fourier‐transform infrared spectroscopy. After 1 d of incubation, when dentin was not present, 2SE yielded the highest cell viability, whereas 3ER, UNI, and SACR showed higher cell viability in the presence of dentin. After 7 d, when dentin was absent, 2SE and CLA achieved significantly higher cell viability. The presence of dentin resulted in a drastically higher cell viability for all materials, except 2SE and CLA. UNI had the lowest C=C conversion. The presence of dentin was a significant factor, which resulted in higher cell viability than what was seen for the material specimens per se. All materials resulted in a lower viability of HaCaT than what was seen under the no‐material control conditions, with effects mainly limited to the first 24 h. [ABSTRACT FROM AUTHOR]

The purpose of this study was to review the outcomes of the different therapies for extracranial head and neck arteriovenous malformations (AVMs). AVMs are high-flow congenital vascular anomalies. They are composed of a complex system of vessels directly connecting feeding arteries to draining veins forming a nidus. They may be potentially life-threatening due to progressive symptoms and infiltrative disease. Extracranial AVMs most commonly affect the head and neck area (47.4%) followed by the extremities (28.5%). AVMs are best characterized as being either focal or diffuse. Focal AVMs have good outcomes following adequate treatment. Diffuse lesions have multiple feeding vessel, which results in high rates of recurrence despite treatment. The management of AVMs includes conventional surgery and endovascular techniques. A combination of embolization and surgical resection has become the treatment of choice over the last years. The main goal of both forms of treatment being the complete blockage or resection of the nidus. Transcatheter embolization of vessels has evolved over the years and new embolic agents have emerged. The types of materials available for embolization are classified into mechanical devices, liquid agents and particulates. Efficacy, rate of recurrence and most common complications were evaluated. AVMs recurrence after embolization or resection is reported in up to 80% of cases. Incomplete resection and embolization can induce aggressive growth of the remaining nidus and the risk of progression is up to 50% within the first 5 years and recurrences can occur up to 10 years later. Although ethanol seems to be associated with the highest degree of cure and permanent occlusion, the overall complication rate reported was 48%. Other materials, such as cyanoacrylate, have obtained modest rates of complete remission, while the reported rates of complete regression of AVMs with Fibrin glue and Polyvinyl alcohol are above 50%. At present, there are no unified agreement on the ideal embolic agent. Therefore, a multidisciplinary approach is recommended to support decision making about the best therapeutic approach and to achieve optimal outcome. A long-term post-treatment follow-up is recommended to recognize early recurrence. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the in vitro bond strength of universal adhesive systems to indirect substrates. Material and Methods: Two reviewers performed a literature search up to March 2018 in seven databases: PubMed, Web of Science, SciELO, Scopus, LILACS, IBECS, and BBO. The review included studies that compared the bond strength of universal adhesives and well‐established material‐specific primers to indirect substrates: lithium disilicate ceramic, yttrium‐stabilized zirconium dioxide ceramic, leucite‐reinforced ceramic, feldspathic porcelain, polymer infiltrated ceramic material, resin composite or metal alloys. Analyses were carried out using RevMan 5.3.5. A global comparison was performed with the standardized mean difference using a random‐effects models at a significance level of p < 0.05. Results: A total of 45 studies were included in the qualitative analysis, and the meta‐analysis was performed with 42 studies. Bond strength to glass‐based ceramics and alloys was improved with the use of a specific‐primer as separate step before the bonding procedures (lithium disilicate, p < 0.001; alloys, p < 0.001). The bond strength to zirconium substrates was improved with the use of universal adhesives (p < 0.001). For bond strength to composite resin as indirect substrate, universal adhesives performed in a manner similar to that of the material‐specific primer (p = 0.11). Conclusions: The clinical procedure of luting zirconia and resin composite restorations could be simplified by using single‐bottle universal adhesives. However, the ability of universal adhesives to achieve an adequate and durable bond to glass‐based ceramics and alloys appears to be limited. [ABSTRACT FROM AUTHOR]

The aim of this work is to evaluate the effect of different adhesive protocols on the bond strength (SBS) of composite resin for indirect use to repairs of bulk-fill or conventional nanoparticulated composites. Forty-eight cylindrical specimens of composite resin for indirect use were prepared, aged, and randomly divided into four groups (n = 12), a control group without any adhesion protocol, and three experimental groups: Silane + Scotch Bond Multipurpose adhesive (S + SBMP), Tetric N Bond Universal (TBU), and Single Bond Universal (SBU). The treated surfaces were restored using two different composite resins: Filtek Bulk-Fill or Filtek Z350XT. Then, the specimens were submitted to the SBS test, and the resultant data were analyzed with ANOVA on ranks test and Tukey's test (α = 0.05). There were no significant differences between the two types of resins used as repair material. For both resins, the groups treated with S + SBMP obtained the highest values (p < 0.001). Groups TBU and SBU did not have statistically significant differences between them. Pre-treatment with a silane coupling agent and a layer of a hydrophobic adhesive can improve the bond strength of repairs performed on a composite resin for indirect use. [ABSTRACT FROM AUTHOR]

• The adhesive systems lost their bonding ability with progressively storage time. • Apparently, HEMA-free adhesives produce materials with higher shelf-life stability. • Shelf-life simulation should be considered as routine for adhesive systems evaluation. To evaluate the micro-tensile bond strength to dentin (μTBS), the degree of conversion (DC) and nanoleakage expression (NL) of eight dental adhesives considering their expiry date (as-received, half-life and or end of shelf-life) after shelf-life simulation. Five universal adhesives (Single Bond Universal, SBU; Tetric Bond Universal, TBU; OneCoat Universal, OCU; OptiBond Universal, OBU; and Prime&Bond Elect, P&B), two two-step self-etch adhesives (Clearfil SE, CSE; and AdheSE, ASE) and one two-step etch-and-rinse adhesive (Adper Singlebond 2, ASB) were evaluated. Shelf-life was simulated by storing the materials in an acclimatization chamber for different periods of time. The μTBS was tested in accordance with ISO/TS 11,405. DC was evaluated by means of FTIR spectroscopy. NL was evaluated after ammoniacal silver challenge. The significance level of α = 0.05 was used for all statistical analyses. The μTBS to dentin of TBU, P&B, ASE, and ASB adhesive systems remained stable throughout the shelf-life periods evaluated, while for SBU, OCU, OBU, and CSE, decreased significantly after evaluation in the 'half-life' or 'end of shelf-life' condition (p < 0.05). Except for P&B, ASE and OBU, the degree of conversion significantly decreased after the shelf-life simulation (p < 0.05). OCU, ASE, and CSE showed significantly increased percentage of silver deposition within the adhesive layer (p < 0.05). Storing conditions and progressively longer storage time affect the performance of universal adhesives systems. [ABSTRACT FROM AUTHOR]

This work aimed to examine the effect of unreacted substances of four universal adhesives on cell viability, taking into account different sample preparation protocols. The protocols for sample preparation were as follows: P1: Disc-shaped specimens made of the adhesive material itself; P2: filter paper disc impregnated with the adhesive system; P3: bovine dentin disc impregnated with the adhesive system. The UHPLC/Q-TOF-MS spectroscopy was utilized to detect the type and quantity of unreacted substances released. The cell viability of the universal adhesives was evaluated considering the sample preparation protocol, as well as the different concentrations of each compound detected by the UHPLC/Q-TOF-MS spectroscopy in their isolated form. The WST-1 assay was employed to assess cell viability. From the extraction media, HEMA, BisGMA, CQ, EDAB, TPO, and UDMA were identified. When evaluated in P1, significantly higher amounts of CQ were detected in all of the universal adhesives (p<0.001). The sample preparation protocol was found to significantly influence cell viability (p<0.001). Notably, all universal adhesives exhibited a cytotoxic effect only when using the P1 protocol. Among the analyzed substances, CQ was identified as the most cytotoxic component (p<0.05). It was observed that disc-shaped specimens made with the material itself resulted in an overestimation of the cell viability outcomes for the universal adhesives. • Camphorquinone was shown to be the most cytotoxic component eluted. • Dimensions of the samples had a significant influence on the cell viability results. • Cell viability of dental materials should be performed in an as-used state. [ABSTRACT FROM AUTHOR]

Debonding of orthodontic brackets is a common occurrence during orthodontic treatment. Therefore, the best option for treating debonded brackets should be indicated. This study aimed to evaluate the bond strength of rebonded brackets after different residual adhesive removal methods. This systematic review and meta-analysis was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. PubMed, Web of Science, The Cochrane Library, SciELO, Scopus, LILACS, IBECS, and BVS databases were screened up to December 2020. Bond strength comparisons were made considering the method used for removing the residual adhesive on the bracket base. A total of 12 studies were included for the meta-analysis. Four different adhesive removal methods were identified: sandblasting, laser, mechanical grinding, and direct flame. When compared with new orthodontic metallic brackets, bond strength of debonded brackets after air abrasion (p = 0.006), mechanical grinding (p = 0.007), and direct flame (p < 0.001) was significantly lower. The use of an erbium-doped yttrium aluminum garnet (Er:YAG) laser showed similar shear bond strength (SBS) values when compared with those of new orthodontic brackets (p = 0.71). The Er:YAG laser could be considered an optimal method for promoting the bond of debonded orthodontic brackets. Direct flame, mechanical grinding, or sandblasting are also suitable, obtaining clinically acceptable bond strength values. [ABSTRACT FROM AUTHOR]

This paper presents state of the art universal adhesive systems and the effect of shelf-life and storage conditions on their bond performance. Three topics are explored in this review: an introduction to the topic, the mechanisms responsible for the degradation of the hybrid layer, and the factors that play a role in the stability of universal adhesives. In addition, issues such as potential durability and clinical importance are discussed. Universal adhesive systems are promising but must be handled and stored according to the manufacturer's instructions, with careful attention given to the details of shelf-life and storage conditions for maximal success. It appears that the components of universal adhesives play an important role in their stability. Furthermore, HEMA-free formulations using methacrylamides lead to longer shelf-life. Further research is needed to prove these hypotheses. [ABSTRACT FROM AUTHOR]

This work reports the use of two monomers with two tertiary amines and four methacrylic (TTME) or acrylic (TTAC) terminal groups as co-initiators in the formulation of experimental resin adhesive systems. Both monomers were characterized by FT-IR and 1H NMR spectroscopies. The control adhesive was formulated with BisGMA, TEGDMA, HEMA, and the binary system CQ-EDAB as a photo-initiator system. For the experimental adhesives, the EDAB was completely replaced for the TTME or the TTAC monomers. The adhesives formulated with TTME or TTAC monomers achieved double bond conversion values close to 75%. Regarding the polymerization rate, materials formulated with TTME or TTAC achieved lower values than the material formulated with EDAB, giving them high shelf-life stability. The degree of conversion after shelf simulation was only reduced for the EDAB material. Ultimate tensile strength, translucency parameter, and micro-tensile bond strength to dentin were similar for control and experimental adhesive resins. Due to their characteristics, TTME and TTAC monomers are potentially useful in the formulation of photopolymerizable resins for dental use with high shelf-life stability. [ABSTRACT FROM AUTHOR]

Currently, the availability of a wide variety of universal adhesives makes it difficult for clinicians to choose the correct system for specific bonding situations to dentin substrate. This study aimed to determine whether there are any alternative techniques or additional strategies available to enhance the bond strength of universal adhesives to dentin through a systematic review and meta-analysis. Two reviewers executed a literature search up to September 2020 in four electronic databases: PubMed, ISI Web of Science, Scopus, and EMBASE. Only in vitro studies that reported the dentin bond strength of universal adhesives using additional strategies were included. An analysis was carried out using Review Manager Software version 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). The methodological quality of each in vitro study was assessed according to the parameters of a previous systematic. A total of 5671 potentially relevant studies were identified. After title and abstract examination, 74 studies remained in systematic review. From these, a total of 61 studies were included in the meta-analysis. The bond strength of universal adhesives to dentin was improved by the use of one of the following techniques: Previous application of matrix metalloproteinases (MMP) inhibitors (p < 0.001), prolonged application time (p = 0.007), scrubbing technique (p < 0.001), selective dentin etching (p < 0.001), non-atmospheric plasma (p = 0.01), ethanol-wet bonding (p < 0.01), prolonged blowing time (p = 0.02), multiple layer application (p = 0.005), prolonged curing time (p = 0.006), and hydrophobic layer coating (p < 0.001). On the other hand, the use of a shortened application time (p = 0.006), and dentin desensitizers (p = 0.01) impaired the bond strength of universal adhesives to dentin. Most of the analyses performed showed a high heterogenicity. The in vitro evidence suggests that the application of universal adhesives using some alternative techniques or additional strategies may be beneficial for improving their bonding performance to dentin. This research received no external funding. Considering that this systematic review was carried out only with in vitro studies, registration was not performed. [ABSTRACT FROM AUTHOR]

To determine whether warm-air stream for solvent evaporation improves immediate and long-term bond strength of adhesive systems through a systematic review and meta-analysis. PubMed, ISI Web of Science, Cochrane Library, SciELO, Scopus, and BVS, as well as Open Grey, were searched for relevant studies. Only in vitro studies reporting the effect of the use of warm-air stream to evaporate solvents of adhesive systems on the bond strength to enamel or dentin, were included. A global analysis compared the standardized mean difference between bond strength values using warm-air stream against a control group in which room-temperature air-stream was used. Bond strength from etch-and-rinse and self-etch adhesives was analyzed separately using the random-effects model at a significance level of α = 0.05. For each adhesive type, subgroup analyses were performed considering the type of solvent with which the adhesives were formulated. A total of 10 in vitro studies were included in the meta-analysis. For etch-and-rinse or self-etch adhesives, the use of warm-air stream for adhesive solvent evaporation improved the bond strength to dentin of water- or alcohol-based adhesive systems (p ≤ 0.03). On the contrary, this effect could not be observed for acetone-based adhesive systems (p ≥ 0.13). The overall effect demonstrated bond strength was enhanced with the use of warm-air stream (p ≤ 0.03). The in vitro evidence suggests that bond strength of self-etch or etch-and-rinse adhesives could be improved by using warm-air stream for solvent evaporation. • Bond strength is improved by use of warm-air stream for solvent evaporation. • Solvent evaporation is facilitated by a temperature increase of the material. • This effect is more noticeable for alcohol/water-based adhesives. [ABSTRACT FROM AUTHOR]