Search

The internal structures and the hygroscopicity of bio-based boards consisting of giant reed (Arundo donax L.) and hazelnut shells as bio-aggregates, and a sodium silicate solution as the adhesive, were investigated. The aim was to evaluate the influence of each material (the bio-aggregates and adhesive) and their distributions in the boards on the final performance. By carrying out X-ray computed tomography, the internal structures and the porosities of the boards were determined, allowing important considerations of their hygroscopicity. The voids' percentages were between 26% and 36% of the total volume of the composites. Both the materials and the composites demonstrated high hygroscopicity. In particular, the mixtures of the bio-aggregates and the sodium silicate allowed reaching a moisture buffering value of 7.44 g/(m2%RH) for the A. donax-based composite, 3.86 g/(m2%RH) for the hazelnut-shell-based composite, and 4.65 g/(m2%RH) for the mixture-based composite. Besides the identification of the contributions of the materials, a detailed discussion of the assessed properties was carried out to use these bio-based boards in vernacular historic construction. The results show how the aggregate type and the adhesive content affected the final behavior, demonstrating the importance of a conscious material choice. Furthermore, helpful information for the future development of these types of bio-based boards and their possible optimization was provided. [ABSTRACT FROM AUTHOR]

The present work investigates the feasibility of producing boards, with unconventional materials, namely hazelnut shells as a high-mass bio-aggregate and a sodium silicate solution as a no-toxic adhesive, and discusses possible applications based on an extensive characterization. The aim is to define a feasible reuse of a largely produced agro-industrial by-product to reduce the high environmental impact caused by both the construction and the agriculture sectors, by proposing a building composite that improves indoor comfort. The presented combination of aggregate-adhesive generated a product with characteristics interesting to explore. The thermal conductivity is moderated, and the composite achieved values of σ max = 0.39 N/mm² for flexural strength and σ max = 2.1 N/mm² for compressive strength, but it showed high sorption capacity with a moisture buffering value of about 3.45 g/(m² %RH), and a peak of sound absorption between 700 and 900 Hz. Therefore, the boards' most promising performance parameters seem to be their high hygroscopicity and acoustic absorption behaviour, namely in the frequency range of the human voice. Hence, the proposed composite could improve indoor comfort if applied as an internal coating board. • Hazelnut shells are an agro-industry waste largely available and suitable to produce boards. • Hazelnut shells, sodium silicate, and composite boards using both are highly hygroscopic. • Applied in buildings as indoor coating boards they could act passively as moisture buffers. • The hazelnut shells-based board shows positive, uncommon acoustic absorption performance. • The composite board can avoid the indoor acoustic discomfort caused by people's speech. [ABSTRACT FROM AUTHOR]

• Agro-industrial wastes are feasible to produce bio-composite boards and panels with different adhesives. • The properties of the bio-composites widely depend on the selected adhesives. • Sodium silicate-based bio-composites have high hygroscopicity and good resistance to mould growth. • Starch-based bio-composites are easily affected by mould at high relative humidity. • Citric acid and sodium silicate solution can improve bio-composites biological resistance. Laboratory tests were carried out to evaluate the feasibility of producing boards or coating panels with good hygrothermal performance by using different agro-industrial wastes (grape and olive press wastes, hazelnut shells, spent coffee and pine) and adhesives (gypsum-based binder, sodium silicate solution and starch-based glue). Hygrothermal properties and resistance to mould growth, including the effect of citric acid, were evaluated. The results highlighted the benefits and drawbacks of each adhesive: the binder seems more adequate to produce bio-based plastering mortars than boards; the other adhesives seem efficient solutions to produce boards with good hygrothermal properties; for the natural glue the bio-susceptibility needs improvement. [ABSTRACT FROM AUTHOR]